Посібник користувача планшета Vortex BTAB10

If your Vortex BTAB10 tablet is not turning on after a long charge, please try the following troubleshooting steps:

• Perform a Hard Reset: Натисніть і утримуйте Кнопка живлення for at least 10 to 15 seconds. This can often force the device to reboot if it is stuck in a frozen state.
• Check the Charging Connection: Ensure the included Type-C cable and power adapter are securely connected to both the tablet and a working wall outlet. If possible, try a different Type-C cable or adapter to rule out a faulty charger.
• Перевірити стан зарядки: Look for any indication of life on the screen (such as a battery icon) when you first plug it in. If the screen remains completely black, the battery may be deeply discharged or there may be a hardware issue.
• Перевірка кнопки: Ensure the power button is not stuck. The manual indicates the volume buttons are located near the power button; make sure you are pressing the correct button to power on the device.

Note: While you mentioned the model 'BRA 10', these instructions apply to the BTAB10 model associated with your request. If the device remains unresponsive after these steps, it may require professional service or a warranty claim.

If you are being prompted for a security code (PIN, Pattern, or Password) on a new Vortex BTAB10 tablet that you have never set up, please consider the following possibilities and solutions:

• Коди за замовчуванням: Most modern Android tablets do not come with a pre-set security code. If the device is asking for one immediately out of the box, try common defaults like 0000 or 1234, though these are rarely used on current Android 13 devices.
• Google Account Lock (FRP): If the tablet was previously owned or reset, it may be asking for the previous owner's Google account credentials or the last used security code. This is a security feature called Factory Reset Protection.
• PIN-код SIM-карти: If you have inserted a SIM card, the tablet might be asking for the SIM PIN rather than a device code. Check with your mobile carrier for the default SIM PIN (often 1111 or 1234).
• Заводські налаштування: If you are locked out and cannot remember setting a code, you may need to perform a hardware factory reset. Note: This will erase all data on the tablet. To do this, power off the device, then press and hold the Кнопка живлення і Збільшення гучності (or Volume Down) simultaneously to enter the Recovery Menu, where you can select "Wipe data/factory reset."

Because the provided manual does not list a specific default factory security code, we recommend contacting Vortex support or your service provider if the tablet remains locked.

The Vortex BTAB10 is primarily a tablet device. While it supports 4G LTE connectivity and has slots for 2 Nano SIM cards, it may not include a native "Phone" dialer app if it is configured as a data-only device or if your carrier plan does not support voice calls on tablets.

To troubleshoot this, please try the following:

• Check SIM Card Installation: Ensure your SIM card is correctly inserted into the Nano SIM slot as shown in the manual.
• Verify Carrier Plan: Confirm with your mobile provider that your SIM card and plan support voice calls on a tablet device. Some plans are restricted to data only.
• Use Alternative Apps: If the native dialer is missing, you can still make calls using VoIP applications such as WhatsApp, Skype, або Google Meet over a Wi-Fi or data connection.
• Перевірте налаштування: Перейти до Settings > Network & Internet > Mobile Network to ensure the SIM card is recognized and active.

If you believe the device should have a native dialer and it is missing, you may need to contact Vortex customer support for further assistance with your specific firmware version.

Note: The manual confirms support for GSM and WCDMA bands, which are used for cellular communication, but software availability for voice calls can vary by region and carrier.

If your Vortex BTAB10 tablet is stuck on a black screen with a blue "SIM DETECT" message after attempting a reset, it may be in a diagnostic or factory test mode. Try the following steps to resolve the issue:

• Примусовий перезапуск: Натисніть і утримуйте Кнопка живлення for at least 10 to 15 seconds until the device turns off and attempts to reboot normally.
• Check SIM/SD Card: Power off the tablet and remove the SIM card and SD card tray. Ensure they are seated correctly or try booting the device without them to see if the message clears.
• Заряд батареї: Ensure the device has sufficient power. Plug it into the original charger for at least 30 minutes before attempting to power it on again.
• Вийти з тестового режиму: If there are other options on the screen (even if faint), use the Кнопки гучності to navigate and the Кнопка живлення to select "Reboot system now" or "Exit."

If the tablet remains stuck on this screen, it may indicate a firmware error or hardware fault. You may need to contact Vortex customer support for further assistance.