Splitfire 3255 Wood Splitters User Guide

Splitfire 3255 Wood Splitters

закінченоview

Compact, aggressive live sampler featuring 3 voices and 16 slices with a 4 s buffer. Record audio, slice or pitch-map it to keys, and shape playback in real time with CV and performance controls.

Технічні характеристики

Короткий посібник

1. Wire audio in: connect an external source to IN L/R (synth, sampler, drum machine, or mic preamp).
2. встановити РЕЖИМ ЗАПИС by selecting HOLD, FIXED, or Q (under the HOLD label).
3. Прес REC and play your source; the IN meter shows real-time input levels. The unit captures up to ~4 seconds.
4. Connect a MIDI keyboard and play notes. Furioso accepts MIDI input; the waveform screen shows a live playhead indicator.
5. встановити РЕЖИМ (right side). Choose НАРІЗ to trigger individual slices per key (C3 = slice 1, C#3 = slice 2, etc.) or ВИСОТА to play the entire sample mapped to key pitch.
6. Tweak parameters in real time (e.g., ШВИДКІСТЬ, ВИСОТА, REV, ПЕТЛЯ). Використовуйте CLR to clear the buffer or UNDO to restore the previous sample state.

Compact aggressive live sampler • 3 voices • 16 slices • ~4 s buffer • 2RU

Елементи керування на передній панелі

Back panel (CV I/O)

Контрольна карта

Every control on the front panel, grouped by functional zone.

SAMPLE

• РЕЖИМ ЗМЕНШЕННЯ: Loop crossfade behavior (auto/manual)
• XFADE: Loop crossfade duration
• SLICES (auto/man): Slice mode & slice count adjustment (1 to 16)
• TRANS: Transient detection sensitivity for automatic slicing

WAVEFORM / DISPLAY

• ПОЧАТОК: Pitch-mode audio region starting point (maps to start key)
• КІНЕЦЬ: Pitch-mode audio region ending point
• ДИСПЛЕЯ: Renders the live waveform, playhead activity, slice grid, and mute/loop status indicators

ЗАПИС

• REC: Start recording/re-recording
• CLR: Clear active sample буфер
• СКАСУВАТИ: Restore the previous sample state
• HOLD/FIXED/Q: Select record trigger and timing modes
• IN METER: Visual LED level meter (green/yellow/red)

VOICE PARAMS

• КОРІНЬ: Root note definition for pitch-mode mapping
• PORTA: Portamento transition duration
• ATK / REL: Volume envelope attack and release times
• ПАН: Output stereo pan spread across voices
• DEGR: Bit-depth and sample-rate reduction degradation control
• обсяг: Output master volume level

ЗАЇКАТИСЯ

• РОЗМІР: Loop length of the stutter window
• STUT: Instantly engages the stutter mechanism (also triggerable via CV gate)
• СТАВКА: Playback rate within the stutter window

КАНАЛ

• МУК: Instantly mutes the module during live performance
• VOICE Q: Selects voice architecture: Poly, Mono, Legato, or Retrigger
• РОЗМІР: Sets recording quantize size (5 selective options)
• LEN: Sets recording duration for the FIXED record mode

ВІДТВОРЕННЯ

• ШВИДКІСТЬ: Playback speed multiplier from 0x to 3x (1x marked at physical detent position)
• КРОК: Toggles primary playback engine between Slice and Pitch modes
• REV: Toggles reverse playback direction
• LEN: Active loop length window (active within slice boundaries or pitch regions)
• LOOP / MODE / PERF: Controls loop execution, sub-mode switching, and performance expression options

ЗЧИТАННЯ ДИСПЛЕЯ

• M / LOOP / ►: Direct visual feedback for Mute status, Loop configuration, and Transport status
• 1.00/1: Current slice metadata readout
• LOCK / ✦: Quantize lock state and individual slice alteration indicator

CV Quick Grid (Back Panel)

Вхідний порт	функція	Output Port / Channel	функція
В Л/П	Аудіовходи	OUT V1/V2/V3	Per-voice independent direct audio outputs
GATE / NOTE	Sequencer pitch and gate inputs	OUT (main)	Master stereo mix output
REC	Record trigger gate (active on rising edge)	CLR	Buffer erase gate (active on rising edge)
ВИМКНЕНО	Mute control gate (level-based or edge-triggered)	STUT	Stutter activation gate (active when gate is high)
НАРІЗ	Slice selection voltage (maps 0..1 to 1..N slices)	PLAYHEAD (out)	Generates playhead position CV (0..1 scale)
SLICES (v3.2)	External slice control (forces slice counts 1..16)	SLICES (out)	Outputs current slice count signal (0..1 scale)
WIN (v3.2)	Bipolar modulation input for Stutter window size	RATE (v3.2)	Bipolar modulation input for Stutter rate
ПОРТА	Modulation input for Portamento rate	ШВИДКІСТЬ	Modulation input for playback Speed
REV	CV toggle input for reverse playback direction	LEN	Modulation input for Loop length limits
ATK / REL	Modulation inputs for envelope Attack & Release	START / END	Modulation inputs for Pitch-region boundary targets

Професійні поради

• Drum Deconstructions: Run 5 instances of the Furioso inside a Combinator wrapper for complex drum-kit splitting and slicing. It uses significantly less RAM than a single Rubato module and easily fits within 10 RU.
• Polyrhythmic Grid Modulation: Standardize rhythmic variation by patching dedicated CV outputs or external LFO signals into the back panel’s SLICES inputs. Modulating the slice limits with distinct, un-synced LFO frequencies creates intricate polyrhythmic shifts.
• Dynamic Slicing: Годувати cv_gate_rec port a trigger from an active sequencer track. This enables automatic loop recapture at structural bars, generating ever-evolving sample variations.
• Morphing Textures: Integrating CV triggers into Stutter RATE and SIZE on version 3.2 firmware changes the stutter function from a simple on/off switch into a deeply expressive, continuously variable audio effect.

Усунення несправностей

• No (or unexpected) recorded audio: Verify audio input by watching the IN METER while you press REC and play the source; it should move with your incoming signal.
• Buffer seems wrong, or you need a fresh capture: використання CLR to clear the active sample buffer, then record again.
• Accidentally changed the sample state: використання UNDO to restore the previous sample state.
• Playback timing/mapping not behaving as expected: Confirm you selected the intended РЕЖИМ ЗАПИС (HOLD, FIXED, or Q) and the intended РЕЖИМ (SLICE vs PITCH) before performing.
• Stutter/performance gates not responding (if using CV): Забезпечити STUT gate input is high to engage stutter (STUT is active when gate is high).
• Loop-related behavior not matching your intent: Налаштувати LOOP / MODE / PERF controls and loop settings such as LEN і РОЗМІР (stutter window size) to match the desired active region/loop length.