Інструкція з експлуатації прямокутного обіднього столу PIZZELLO

PIZZELLO Rectangular Dining Table

Технічні характеристики

• Designed for durability, weather resistance, and low maintenance
• Підходить for both indoor and outdoor spaces
• Діапазон температур: -104 to -140 (-40 to 60)
• Час складання: До 30 хвилин

Інструкція з використання продукту

Список деталей:

List of parts A-N with quantities and sizes.

Необхідні інструменти:

• Шестигранний ключ (у комплекті)
• Open-end wrench (Provided)

Інструкції зі складання

• Крок 1: Connect panel E and panel D using screw G and nut N. Ensure correct connection by checking for 4 silver screw heads in the middle of the table.
• Крок 2: Assemble parts C, Cupright, F, and L screws as instructed.
• Крок 3: Continue assembling part F with part B using L screws.
• Крок 4: Attach the connected B and C parts to the tabletop using screw J.
• Крок 5: Connect part A with parts B and C using screws J and H. Secure with screw H from the inside.

Patio Bistro Chair

• Follow the labeled legs for the front side indication
• Assemble on a flat surface to avoid scratches
• Do not dispose of the original box until you confirm the product
• Contact after-sales service for product return

ВСТУП

• Thank you for choosing our rectangular dining table! This table is designed for durability, weather resistance, and low maintenance, making it a great addition to both indoor and outdoor spaces.
• To ensure long-lasting use and maintain its quality, please read and follow the usage precautions below.

Застереження щодо використання

УВАГА

• Термостійкість: The table can withstand temperatures between -104℉ to -140℉ (-40℃to -60℃）. Avoid placing high-temperature objects (such as grills or hot pots) directly on the surface to prevent damage. Using heat-resistant mats is recommended.
• Уникайте тривалого перебування на сонці: While our table is weather-resistant, extended exposure to strong sunlight may cause fading or slight warping. Covering the table with a cloth or protective cover when not in use is advised.
• Запобігати Подряпини: Avoid using sharp objects such as knives directly on the table surface to prevent scratches.

НЕОБХІДНІ ІНСТРУМЕНТИ

ВИМОГИ ДО ЗБОРУ

СПИСОК ДЕТАЛЕЙ

ІНСТРУКЦІЯ З МОНТАЖУ

1. Крок 1
   • Use screw G and nut N to connect panel E and panel D.
   • Примітка: If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
   • Please check it before installing.
   • A) If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
   • B) If part E is incorrectly connected, you will see the 4 silver screw heads on the side of the table, and you will have a problem on the next step.
2. Крок 2
   1. Stand parts C and Cupright at a 90-degree angle to the ground or easier installation.
   2. Insert one end of part F into part C, align the holes, and secure it with two L screws.
3. Крок 3
   • Insert the other end of part F into part B, align the holes, and secure it with two L screws
4. Крок 4
   • Attach the connected B and C parts to the tabletop using screw J.
5. Крок 5
   • Use screws J and H to connect part 2 (A) parts with parts B and C.
   • (Secure with screw H from the inside)
   • Secure with screw H from the inside

PATIO BISTRO CHAIR

Шановний клієнте!

• Thank you for choosing our product. Please read this manual carefully before assembling or using the product, to avoid damage caused by improper use.
• If the product is passed on to third parties, this manual has to be passed on along with the product. For any questions, don’t hesitate to contact us.

НЕОБХІДНІ ІНСТРУМЕНТИ

ВИМОГИ ДО ЗБОРУ

СПИСОК ЧАСТИН

• Fasten screws loosely during initial assembly. Do not firmly tighten screws until step 7.

Інструкції зі складання

• Поради: We have labeled the legs to indicate which side is the front side.
• However, the factory sometimes mislabeled them. Please check with the picture before installing; the straighter side should be the front side.

УВАГА

• When installing, we suggest you can assemble the product on the flat carton which comes with the product, or any other clean floor to avoid the product surface being scratched.
• Please do not dispose of the original product box until you confirm you received the complete and correct item.
• If you want to return the product, you are suggested to contact our after-sales service first. You need to pack the returned product with the original box and then follow the steps to return it.
• Крок 1: Connect the beam (E) and the left front leg (A). Use the screw (G) and nut (F) to connect them.
• Please don’t tighten the screws yet.
• Крок 2: Connect the beam (E) andthe  Right Front Leg (B). Use the screw (G) and nut (F) to connect them.
• Please don’t tighten the screws yet.
• Крок 3: Attach the chair seat (C) to the Left Front Leg (A) and the Right Front Leg (B).
• Please make sure you attach the seat from the correct direction.
• Крок 4: Use the 4 scresw (G) and 4 nuts (F) to connect them.
• Крок 5: Remove the 2 protective cases on the seat (C).
• Крок 6: Assert the seat back (D) to the seat (C).
• Крок 7: Затягніть всі гвинти та гайки.

How To Replace The Back And Seat

• A: Slowly take apart the back of the back frame.
• B) Slowly take apart the seat from the seat frame.
• Примітка: When replacing the new seat and back, make sure you assemble them from the correct direction. The edge with round angle should face outside.

FAQ