FUNPOWER FT366YG Remote Controller User Manual

Логотип FUNPOWER

FUNPOWER FT366YG Remote Controller

FUNPOWER-FT366YG-Remote-Controller-Product

Технічні характеристики

Модель FT366YG
потужність AAA / 1.5V × 2 batteries
Індикатор стану батареї LED indicator shows key-press status and low-battery condition
Control modes (O/D Switch) O: Direct control; D: Control after learning/pairing
Regulatory (FCC ID) Ідентифікатор FCC: 2ABUP-FT366YG
Regulatory (IC) IC: 25540-FT366YG

Quick Setup & Use

  1. Install 2 new AAA / 1.5V batteries, ensuring correct alignment.
  2. Використовуйте O/D switch: set to O for direct control, or D for control after learning/pairing.
  3. Pairing: press the навчання button to pair the transmitter with the receiver (then use D режим)
  4. Press buttons to control: швидкість вентилятора, color temperature switching, Вентилятор вимкнено, і Вентилятор вперед/назад (summer/winter modes).
  5. Light control: use Світло ON/OFF, and press/hold to adjust затемнення світла.

Інструкція з експлуатації

FUNPOWER-FT366YG-Remote-Controller-fig

  • ① LED Indicator: Displays status of key presses and battery levels.
  • ② Speed of the Fan: Adjusts the rotation speed of the fan.
  • ③ Color temperature switching: Alternates between light color settings.
  • ④ Fan OFF: Powers down the fan.
  • ⑤ Fan Forward/Reverse: Toggles direction of rotation (summer/winter modes).
  • ⑥ Light ON/OFF / Light dimming: Controls the light state and holds to adjust brightness.
  • ⑦ Learning button: Використовується для сполучення передавача з приймачем.
  • ⑧ O/D Switch:
    • O: Прямий контроль
    • D: Control after learning/pairing
  • ⑨ BATTERY: Requires AAA / 1.5V x 2 batteries.

Пакет включає

  • 1 × FUNPOWER FT366YG Wireless Remote Controller
  • 1 × Battery (If Included)
  • 1 × Посібник користувача
Safety & Use Precautions
  1. If the LED indicator does not light up when a button on the transmitter is pressed, please check the battery installation and alignment.
  2. If the LED indicator flashes when a key is pressed, it indicates low battery voltage. Please replace both batteries with new ones.
  3. Please remove the batteries from the transmitter if it will not be used for an extended period of time.

Технічне обслуговування та очищення:

  • Clean the remote controller surface using a soft, dry cloth.
  • Do not allow water or cleaning liquids to enter the internal components.
  • Keep the buttons and battery compartment free from dust.
  • Remove the battery if the controller will not be used for a long period.
  • Store the remote in a dry location away from heat and moisture.
  • Avoid dropping or applying excessive pressure to the controller.

Інструкції FCC:

Цей виріб було протестовано та встановлено, що він відповідає обмеженням для цифрових пристроїв класу B відповідно до частини 15 Правил FCC. Ці обмеження покликані забезпечити розумний захист від шкідливих перешкод у житловій установці. Цей виріб генерує, використовує та може випромінювати радіочастотну енергію і, якщо його не встановити та використовувати відповідно до інструкцій, може спричинити шкідливі перешкоди для радіозв'язку.

Однак немає гарантії, що перешкоди не виникнуть під час конкретної установки. Якщо виріб створює шкідливі перешкоди для радіо- або телевізійного прийому, що можна визначити, вимкнувши та ввімкнувши обладнання, користувачеві рекомендується спробувати усунути перешкоди одним або кількома з наступних заходів:

  • Переорієнтуйте або перемістіть приймальну антену.
  • Збільште відстань між виробом і приймачем.
  • Підключіть виріб до іншої розетки, ніж та, до якої підключено приймач.
  • Зверніться по допомогу до дилера або досвідченого радіо/телетехніка.

Цей пристрій відповідає частині 15 правил FCC. Експлуатація залежить від таких двох умов:

  • Цей пристрій не може створювати шкідливих перешкод і
  • Цей пристрій має сприймати будь-які отримані перешкоди, включаючи перешкоди, які можуть спричинити небажану роботу.

УВАГА: Зміни або модифікації, не схвалені стороною, відповідальною за відповідність, можуть позбавити користувача прав на використання продукту.

IC Увага:
RSS-Gen Issue 5 & RSS-Gen numéro 5This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  • Цей пристрій не може створювати перешкод.
  • Цей пристрій має приймати будь-які перешкоди, включно з перешкодами, які можуть спричинити небажану роботу пристрою.

Будь-які зміни або модифікації, не схвалені прямо стороною, відповідальною за відповідність, можуть позбавити користувача права на використання обладнання.

Заява про вплив радіочастот:
Обладнання відповідає обмеженням опромінення IC, встановленим для неконтрольованого середовища.

Усунення несправностей

  • LED indicator does not light when pressing a key: Check the battery installation and alignment.
  • LED indicator flashes when a key is pressed: Батарея обtage is low—replace both batteries with new ones.
  • Remote won’t be used for an extended period: Вийміть батарейки з передавача.

Документи / Ресурси

PDF thumbnailFT366YG Remote Controller
User Manual · FT366YG, FT366YG Remote Controller, Remote Controller

Список літератури

Задайте питання

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Задайте питання

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.