classic Line logo Electra logo

ІНСТРУКЦІЯ З ВИКОРИСТАННЯ

Програматор адрес терміналів

Electra PAS.17A Terminal Address Programmer 0

PRG.PAS.MCS
170 x 112 x 35 мм / 270 г
Plastic case + mechanical keyboard 0°C … 45°C – IP 31
Джерело живлення: 9 В (батарея/акумулятор)
Підключення до терміналу через патч-кабель UTP 0.25 см
Адреси, доступні для програмування: від «000» до «998»
Введення «999» завершує програмування адреси.
ОПИС

The PRG.PAS.MCS programmer allows the programming of  the address (apartment number) for all types of terminals in the Класична лінія range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.

ПІДКЛЮЧЕННЯ ДО ТЕРМІНАЛУ

Electra PAS.17A Terminal Address Programmer 1

  1. Патч-кабель UTP 0.25 см
  2. Назад
  3. Фронт
  4. Програміст PRG.PAS.MCS
  5. Термінал відео – аудіо (MCS.47X, PAS.27X, PAS.37X)
УВІМК./ВИМК
  1. The programmer is turned on by pressing the ON key.
  2. The programmer turns off:
    – 3 seconds after entering the last digit of the programmed address;
    – 10 seconds after being turned on, if no key is pressed.
ПРОГРАМУВАННЯ

Крок 1: Connect the programmer to the terminal.
Крок 2: Натисніть ON key on the programmer → The display shows [Адреса пошти].
Крок 3: On the terminal, press and hold the Key plus ключ.
Крок 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the Key plus key can be released.

07.2025 INS.PRG.PAS.MCS


ЗРОБЛЕНО в ЄС:
ELECTRA srl
Парк Індустріальний Мирослава
вул. Принципала 33, 707307, юд. Ясси – RO

Telephone-A1 Fax-A1 +40 232 214.370
Message-A1 sales@electra.ro
Globel AA1 www.electra.ro

ПІДТРИМКА
ELECTRA Building Communications GmbH
Gadnergasse 71, Stockwerk 1, Büro Top 132
1110 Wien – AT

Telephone-A1 Fax-A1 +43 1 810 20 99
Message-A1 sales@electra-automation.at
Globel AA1 www.electra-automation.at

Документи / Ресурси

Програматор адрес терміналів Electra PAS.17A [pdfІнструкція з експлуатації
PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A програматор адреси терміналу, PAS.17A, програматор адреси терміналу, програматор адреси, програматор

Список літератури

Залиште коментар

Ваша електронна адреса не буде опублікована. Обов'язкові поля позначені *