DrayTek Router Radius Setup
Технічні характеристики продукту
- Назва продукту: RADIUS Setup
- функція: Remote Authentication Dial-In User Service (RADIUS) client/server protocol
- Використання: Authenticating and authorizing dial-up and tunnelled network users
Інструкція з використання продукту
Вступ:
Remote Authentication Dial-In User Service (RADIUS) is a security authentication client/server protocol widely used by Internet service providers for remote access services. It is commonly used for authenticating and authorizing dial-up and tunnelled network users.
Конфігурація:
Follow the steps below to configure the RADIUS client function:
- Check the Enable box to activate the RADIUS client function.
- Server IP Address: Enter the IP address of the RADIUS Kserver.
- Destination Port: Specify the UDP port number on which the RADIUS server is listening. The default value is 1812 based on RF 2138.
- Shared Secret: Configure a shared secret between the RADIUS server and client for message authentication.
- Re-type Shared Secret: Confirm the Shared Secret by retyping it.
вступ
- Remote Authentication Dial-In User Service (RADIUS) is a security authentication client/server protocol widely used by Internet service providers for other remote access services. RADIUS is the most common means of authenticating and authorizing dial-up and tunnelled network users.
- The built-in RADIUS client function allows you to extend the remote dial-in user accounts to the RADIUS server. Your user accounts will not be limited by built-in accounts. It also lets you centralize remote access authentication for network management.
Конфігурація
- Check the Enable box to enable the RADIUS client function
- IP-адреса сервера: The IP address of the RADIUS server
- Порт призначення: The UDP port number on which the RADIUS server is listening. The default value of 1812 is based on RFC 2138.
- Спільний секрет: The RADIUS server and client share a secret that is used to authenticate the messages sent between them. You must configure both sides to use the same shared secret.
- Re-type Shared Secret: Confirm the Shared Secret.
FAQ
What is RADIUS used for?
RADIUS is used for authenticating and authorizing dial-up and tunnelled network users in a centralized manner.
How do I configure the RADIUS client function?
To configure the RADIUS client function, enable it, provide the RADIUS server IP address, specify the destination port, set up a shared secret, and confirm the shared secret.
Документи / Ресурси
 |
DrayTek Router Radius Setup [pdfІнструкції Router Radius Setup, Radius Setup |