Інструкції та посібники користувача RUIXIN PRO

RUIXIN PRO is a specialized manufacturer of knife sharpening tools, best known for its professional fixed-angle sharpening systems such as the RX-008 and RX-009 series. The brand focuses on providing affordable yet high-precision solutions for maintaining razor-sharp edges on a variety of blades, including kitchen knives, hunting knives, scissors, and woodworking tools.

Their product lineup features durable stainless steel and metal alloy constructions, 360-degree rotation mechanisms for flip-over sharpening, and adjustable guide rods that ensure consistent angles. RUIXIN PRO also offers a wide range of sharpening stones, from coarse diamond plates to fine polishing whetstones, catering to both culinary professionals and DIY enthusiasts seeking to extend the life and performance of their cutlery.

• Why does the guide rod fall off during sharpening?

  If the guide rod falls off, it is likely not tightened sufficiently. Use a screwdriver to securely tighten the connection points on the rod assembly.

• What should I do if the angle adjustment pivot slides?

  Ensure the stopper is positioned correctly under the pivot. Using two stoppers together can help fix the position of the pivot more securely and prevent slipping.

• Why is there an angle difference when I flip the knife?

  This often happens if the knife is clamped too deeply or unevenly in the fixture. Adjust the position of the knife within the clamp to ensure it is centered and not seated too deep.

• How do I fix a stuck pivot sliding mechanism?

  Slightly loosen the screw above the pivot and apply lubricating oil or graphite to the guide rod. Rub the rod back and forth to distribute the lubricant.

• Which grit stone should I use first?

  Start with a coarse stone (Low Grit, e.g., 120-400#) to repair damaged or very dull blades. Progress to medium and then fine stones (High Grit, e.g., 1000-3000#) for sharpening and polishing.

• Do I need to use water or oil with RUIXIN PRO stones?

  Yes, for most standard whetstones, soak them in water for 5-10 minutes before use. Diamond stones generally do not require soaking but can be used with water or honing oil for lubrication.