Neoteck RD710

Neoteck 0-10000 PPM Gas Leak Detector RD710 Instruction Manual

Модель: RD710

1. Вступ

The Neoteck RD710 Gas Leak Detector is designed for rapid and accurate detection of various combustible gases. This device provides audible and visual alarms to alert users to potential gas leaks, ensuring safety in residential, recreational, and industrial environments. Please read this manual thoroughly before operation to ensure correct usage and optimal performance.

Техніка безпеки

  • Always perform zero calibration in a clean air environment (e.g., outdoors) to prevent inaccurate low readings.
  • Ensure the device is adequately charged. Low battery can lead to significant measurement inaccuracies.
  • Не піддавайте пристрій дії екстремальних температур або вологості.
  • Уникайте падіння та сильних ударів пристрою.

2. Вміст упаковки

Перевірте наявність усіх елементів в упаковці:

  • 1x Neoteck RD710 Gas Leak Detector
  • 1x кабель USB Type-C для зарядки
  • Сумка для зберігання 1x
  • 1x Посібник користувача
Neoteck RD710 Gas Leak Detector and accessories including USB-C cable, storage bag, and user manual.

Image: Neoteck RD710 Gas Leak Detector with included accessories.

3. Особливості продукту

3.1 High Sensitivity Sensor

The RD710 features a semiconductor sensor for rapid detection of combustible gases, with a response time of 0.5-3 seconds. It offers a wide detection range of 0-10000 PPM (methane-based) with 1 PPM sensitivity.

Diagram showing the Neoteck gas leak detector sensor and various gases it can detect, including Butane, Propane, Natural Gas, Ethane, Methane, LNG, and LPG.

Image: Precision sensing technology detecting various combustible gases.

3.2 Visual & Audible Alarms

The device provides real-time gas concentration feedback through a 3-color LED indicator and an intensifying buzzer:

  • Зелений: Low concentration (0-499 PPM)
  • Жовтий: Medium concentration (500-1999 PPM) with buzzing
  • Червоний: High concentration (2000 PPM and above) with louder buzzing
Neoteck gas leak detector displaying PPM readings and showing the 3-color LED alarm system (green, yellow, red) with corresponding gas concentration ranges.

Image: Visual and audible alarm system with LED indicators.

3.3 Великий РК-дисплей

A 2.9-inch backlit LCD provides clear, real-time readings of PPM values, battery status, and an analog bar graph for gas concentration, even in low-light conditions.

Neoteck gas leak detector with a large 2.9-inch backlit LCD screen showing PPM readings, battery status, and a bar graph. Icons for zero calibration, flashlight, data hold, and auto power-off are also visible.

Image: 2.9-inch large backlit screen for easy reading.

3.4 Rechargeable Battery & Type-C Charging

Equipped with a 1200mAh rechargeable battery, supporting over 3000 charge cycles and up to 16 hours of continuous usage. The device charges via a universal Type-C cable and can operate while charging.

Neoteck gas leak detector being charged via a USB Type-C cable, highlighting its 1200mAh rechargeable battery and auto-shutdown feature.

Image: Rechargeable battery with Type-C charging.

3.5 Multi-Gas Detection

The RD710 detects various common combustible gases, including Liquefied Petroleum Gas (LPG), Liquefied Natural Gas (LNG), methane, ethane, propane, butane, and natural gas.

3.6 Додаткові функції

  • Вбудований ліхтарик: Для використання в умовах слабкого освітлення.
  • Утримання даних: Заморожує поточне значення на дисплеї.
  • Автоматичне вимкнення: Automatically shuts down after 10 minutes of inactivity to conserve battery.
  • Функція відключення звуку: Allows silencing of the audible alarm.

4. Налаштування

4.1 Початкове заряджання

Before first use, fully charge the device using the provided USB Type-C cable and a compatible USB power adapter (not included). The battery indicator on the LCD will show charging status.

4.2 Увімкнення та розігрів

  1. Натисніть і утримуйте кнопку живлення (U), щоб увімкнути пристрій.
  2. The device will enter a 30-second warm-up period. The display will count down.

4.3 Калібрування нуля

After warm-up, perform zero calibration to ensure accurate readings. This must be done in a clean air environment, free from any combustible gases.

  1. Take the device to an area with clean air, such as outdoors.
  2. Press the "MEAS (Set '0')" button. The device will calibrate to zero.
  3. Після завершення калібрування пристрій готовий до використання.
A person using the Neoteck gas leak detector in a kitchen near a gas stove, with text emphasizing that zero calibration must be performed in a clean air environment.

Image: Performing zero calibration in a clean air environment.

5. Операція

5.1 Процедура виявлення газу

  1. After warm-up and zero calibration, slowly move the sensor tip of the detector towards the suspected leak area.
  2. Observe the LCD display for PPM readings and the analog bar graph.
  3. Listen for the audible alarm and note the color of the LED indicator. The alarm intensity and LED color will change with increasinконцентрація газу g.

5.2 Using Buttons

  • Кнопка живлення (U): Натисніть і утримуйте, щоб увімкнути/вимкнути.
  • MEAS (Set '0') Button: Initiates zero calibration.
  • APO Button: Toggles the auto power-off function.
  • Кнопка HOLD: Фіксує поточне значення на дисплеї. Натисніть ще раз, щоб відпустити.
  • Кнопка вимкнення звуку: Toggles the audible alarm sound on/off.
  • Кнопка ліхтарика: Turns the built-in flashlight on/off.

Video: Demonstration of the Neoteck 0-10000 PPM Gas Leak Detector's features, including power-up, warm-up, gas detection with audible and visual alarms, detection of various combustible gases, data hold function, charging, and the built-in flashlight.

6. Технічне обслуговування

6.1 Догляд за акумулятором

  • Recharge the device when the low-battery warning appears on the display.
  • Для оптимального терміну служби акумулятора уникайте частого повного розряджання акумулятора.
  • If storing the device for an extended period, charge it to approximately 50% and recharge every 3-6 months.

6.2 Очищення

  • Протріть зовнішню частину пристрою м’якою тканиноюamp тканина. Не використовуйте абразивні засоби чи розчинники.
  • Keep the sensor tip clean and free from dust or debris to ensure accurate detection.

6.3 Зберігання

  • Store the device in the provided storage bag when not in use.
  • Зберігайте пристрій у прохолодному, сухому місці, подалі від прямих сонячних променів та екстремальних температур.

7. Вирішення проблем

проблемаМожлива причинаРішення
Неточні або суперечливі показникиImproper zero calibration; Low battery; Sensor obstructionPerform zero calibration in clean air; Recharge the battery; Clean the sensor tip.
Пристрій не включаєтьсяBattery is completely discharged; Device malfunctionCharge the device for at least 30 minutes; Contact customer support if issue persists.
No alarm when gas is detectedAudible alarm is muted; Gas concentration below alarm thresholdPress the Mute button to unmute; Verify gas concentration is above 500 PPM for audible alarm.

8. Технічні характеристики

ПараметрЗначення
Бренднеотех
МодельRD710
Діапазон вимірювання0-10000 PPM (Methane-based)
Чутливість1 проміле
Час відгуку0.5-3 секунд
Тип датчикаНапівпровідник
Дисплей2.9-дюймовий РК-дисплей з підсвічуванням
АкумуляторЛітій-полімерний акумулятор 1200 мАг (акумуляторний)
Порт зарядкиUSB Type-C
Автоматичне вимкнення живленняПісля 10 хвилин бездіяльності
Розміри продукту7.26"D x 1.26"W x 2.67"H (185mm x 32mm x 68mm approx.)
Вага товару168 грамів (5.9 унції)
Тип тривогиAudible & Visual (3-color LED)

9. Гарантія

The Neoteck RD710 Gas Leak Detector comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims.

10. Підтримка клієнтів

For technical assistance, troubleshooting, or warranty inquiries, please contact Neoteck customer support through the retailer where the product was purchased or visit the official Neoteck webсайт для контактної інформації.

Пов'язані документи - RD710

попередньоview Конфігурація та функції сканера штрих-кодів Neoteck NTK007 Series-ES
Детальний посібник зі сканера штрих-кодів Neoteck NTK007 Series-ES, що охоплює його вступ, функції мультисканування, звукові/світлодіодні індикатори та різні параметри конфігурації для різних режимів сканування, інтерфейсів та налаштувань зв'язку.
попередньоview Інструкція користувача з тижневого програмованого таймера
Інструкція користувача для тижневого програмованого таймера Neoteck, у якій детально описано його функції, технічні характеристики та інструкції з експлуатації для налаштування часу та програмування циклів увімкнення/вимкнення.
попередньоview RLSOCO Czerwona Obudowa Ochronna do Multimetrów Fluke i Innych - Trwała i Stylowa
Elegancka, czerwona, półtwarda obudowa RLSOCO z zamkiem błyskawicznym, wykonana z ecologicznych materialów EVA i 1680D. Zapewnia bezpieczne przechowywanie i transport multimetrów cyfrowych Fluke (113-179, V88, 233) або marek Astroai, BEVA, Proster, Neoteck, HANMATEK, KAIWEETS, Tacklife. Posiada siatkową kieszeń na akcesoria. Dwóch lat gwarancji.