SUNLU Standard 3D Printer Resin (2KG Grey) Instruction Manual

1. Вступ

This manual provides essential instructions for the safe and effective use of SUNLU Standard 3D Printer Resin. This 405nm UV-curing photopolymer resin is designed for LCD, DLP, and SLA 3D printers, offering high compatibility and reliable performance for various printing applications.

2. Заходи безпеки

Always prioritize safety when handling 3D printer resin. Failure to follow these precautions may result in injury or damage.

• Одягайте захисне спорядження: Завжди одягайте рукавички та маску, щоб уникнути прямого контакту зі шкірою та вдихання парів.
• Захист очей: Avoid contact with eyes. If resin gets into eyes, flush immediately with plenty of water and seek medical attention.
• Небезпека проковтування: This product is not edible. If swallowed, seek medical attention immediately.
• Зберігати поза досяжністю: Keep the resin out of reach of children and pets.
• No Food or Drink: Do not store or consume food or drinks near the resin.
• Вентиляція: Використовувати в добре провітрюваному приміщенні.
• Правильна утилізація: Do not pour uncured resin down drains or dispose of it in regular trash. Cure liquid resin under UV light before disposal.

3. Особливості продукту

• Простий у використанні: Strong fluidity, compatible with various printers and printing speeds, suitable for beginners.
• Good Stability: High tolerance to weak acids and greases, ensuring printed works are not easily deformed.
• Easy Post-processing: Hard and smooth surface, easy to color after printing.
• Low Shrinkage: Provides accurate size and shape of printed parts during curing.
• Легко чистити: Effortless cleaning with isopropyl alcohol or ethanol for a smooth surface finish.
• High Cost-Effectiveness: Good performance and durability at an affordable price.
• Minimal Odor: Light odor during printing, balancing functionality with user comfort.
• Висока сумісність: 365-405nm printing wavelength, compatible with 99% of LCD, DLP, and SLA printers.
• Leak-proof Bottle Design: Patented design and strict packaging to ensure safe delivery.

4. Налаштування

1. Струсніть пляшку: Before each use, shake the resin bottle well for at least 30 seconds to ensure proper mixing of components.
2. Залийте смолу: Carefully pour the resin into your 3D printer's resin vat, ensuring not to exceed the maximum fill line.

5. Інструкція з експлуатації

The SUNLU Standard Resin is compatible with 365-405nm UV light sources. Optimal printing results depend on your specific 3D printer model and environmental conditions. Below are general recommended settings:

Рекомендовані параметри друку:

Note: These settings are general guidelines. Always refer to your 3D printer's specific recommendations and perform calibration tests for optimal results.

6. Післяобробка

1. Видалити друк: Carefully remove the printed model from the build plate using a scraper.
2. Видалити опори: Gently remove any support structures from the model.
3. Clean Model: Wash the printed model thoroughly with 95% isopropyl alcohol or ethanol for approximately 30 seconds to remove uncured resin. For best results, use a dedicated resin washing machine or an ultrasonic cleaner.
4. Dry Model: Allow the model to air dry completely or use compressed air.
5. Post-Cure: Place the cleaned and dried model in a UV curing chamber or under direct sunlight until fully cured. This enhances the model's hardness and durability.

7. Зберігання

• Контейнер: Store resin in its original, sealed container.
• Розташування: Keep in a cool, dry, and dark place, away from direct sunlight and UV light sources. UV light will cure the photosensitive resin.
• температура: Ideal storage temperature is 15-35°C. Lower temperatures may increase resin viscosity.
• забруднення: Ensure the container is sealed to prevent dust or moisture from affecting print quality. Do not pour unused resin back into the original container to avoid contamination.
• Термін зберігання: For best results, use within one year of purchase.

8. Вирішення проблем

Якщо під час друку у вас виникли проблеми, розгляньте такі поширені рішення:

• Failed Prints/Adhesion Issues:
  • Переконайтеся, що робоча платформа належним чином вирівняна та чиста.
  • Increase bottom layer exposure time.
  • Verify ambient temperature is within the recommended range (20-30°C).
• Poor Detail/Soft Prints:
  • Збільште звичайний час експозиції.
  • Ensure adequate post-curing.
• Смола не твердне:
  • Check if the UV light source is functioning correctly.
  • Confirm the resin's curing wavelength (405nm) matches your printer's UV light.
• Надмірний запах:
  • Ensure proper ventilation in your printing area.
  • Use an air purifier if necessary.

For more specific issues, consult your 3D printer's user manual or contact SUNLU customer support.

9. Технічні характеристики

• матеріал: Fast curing standard photopolymer resin
• Curing Wavelength: 365-405 нм
• Метод очищення: 95% Ethanol or Isopropanol
• Heat Distortion Temperature: 55 ° C (131 ° F)
• Розміри упаковки: 10.94 x 7.64 x 2.83 дюймів
• Вага товару: 4.4 фунтів (2 кг)
• Виробник: САНЛУ

10. Гарантія та підтримка

For any product-related inquiries, technical support, or warranty information, please contact SUNLU directly through their official channels. You can visit the SUNLU Store on Amazon or refer to the contact information provided on the product packaging.