PRISMXR Carina C1 Charging Set Instruction Manual

Продукт закінченийview

The PRISMXR Carina C1 Charging Set is designed to extend the battery life of your Ray-Ban Meta Smart Glasses, providing all-day power and flexible charging options. This set includes detachable battery modules, a battery charging case, and a magnetic charging cable.

Зображення: Оверview of the PRISMXR Carina C1 Charging Set, highlighting its invisible design, 12-hour battery life, magnetic charging solution, and compatibility.

Що в коробці

• Detachable Battery x 2
• Battery Charging Case x 1
• Магнітний зарядний кабель x 1
• Nose Bridge Contact Mount with FPC x 1
• Temple Charging Cradle x 1
• Кабель USB-C до USB-C x 1
• Cleaning Wipe x 1

Image: All components included in the PRISMXR Carina C1 Charging Set, neatly arranged in their packaging.

Налаштування

1. Identify Your Glasses Model

Ensure you have the correct Carina C1 version for your Ray-Ban Meta Smart Glasses. Check the model number inside the left temple of your glasses.

Image: Visual guide showing where to locate the model number on the inside of the left temple of Ray-Ban Meta glasses and a table matching models to Carina C1 versions.

2. Install Nose Bridge Mount & Temple Charging Cradle

The nose bridge mount is a one-time installation. Follow these steps carefully:

1. Очистити територію: Use the provided cleaning wipe to clean the nose bridge area of your glasses. Ensure it is dry before proceeding.
2. Відклейте вкладиш: Carefully peel the protective liner from the adhesive side of the nose bridge contact mount.
3. Insert into Nose Bridge: Tilt the ALIGNMENT BRACKET and insert it into the nose bridge of your glasses. Align the pogo pins with the nose bridge contacts.
4. Натисніть, щоб захистити: Press firmly toward the nose bridge and hold for 3 seconds to secure the mount.
5. Remove Alignment Bracket: Hold the front bracket, then tilt the ALIGNMENT BRACKET down to remove it.
6. Безпечне кріплення: Press the nose bridge contact mount firmly for 10 seconds to ensure a secure attachment.
7. Attach Temple Clip: Attach the temple charging cradle clip to the temple arm of your glasses.
8. Lock Cradle: Slide the temple charging cradle forward until it is fully locked into place.
9. Snap Rear Clip: Snap the rear clip of the temple charging cradle onto the temple arm.
10. Остаточна безпека: Peel the liner from the rear clip and press firmly to secure it.

Інструкція з експлуатації

1. Charging Your Glasses

The Carina C1 offers dual charging options to keep your glasses powered.

Option 1: Battery Pack Charging

Snap a detachable battery module onto the temple charging cradle. Each battery provides approximately 2.4 hours of additional use.

Image: Ray-Ban Meta Smart Glasses with a detachable battery module clipped onto the temple, illustrating the 'No More Battery Anxiety' feature with quick recharge options.

Option 2: Magnetic Cable Charging

Connect the magnetic charging cable to the temple charging cradle. This allows for continuous wired charging from a power bank, charger, or PD-enabled phone.

Image: Illustrates both wireless hot-swap battery charging for 12 hours of power and continuous wired charging via a magnetic cable for nonstop use.

2. Charging While Wearing

The charging set supports use while charging:

• 1st Gen Models: Fully supports uninterrupted use.
• 2nd Gen Models: Charging continues seamlessly with audio (music/calls) but pauses during video, photo, or AI tasks. To resume, detach the battery for 3 seconds, then reconnect.

Image: A person wearing Ray-Ban Meta Smart Glasses with the PRISMXR Carina C1 Charging Set attached, demonstrating charging while in use. A note indicates that the charging indicator may not light up when worn after software updates.

3. Перевірка рівня заряду батареї

After the glasses' software is updated to v20.0/21.0, the charging indicator may not light up while they are worn. Please use the Meta AI app to check the charging status and battery level.

4. Charging the Battery Case

The battery charging case has a combined 965 mAh capacity from the two batteries and the case itself, providing up to 12 hours of total power. Charge the case using the provided USB-C to USB-C cable and a 5V or higher USB output charger/power bank.

Image: The PRISMXR Carina C1 charging case open, showing two battery modules and indicating 'All-Day Power' with 12 hours of extended use.

Технічне обслуговування

To ensure optimal performance and longevity of your PRISMXR Carina C1 Charging Set, follow these maintenance guidelines:

• Прибирання: Regularly clean the nose bridge contact mount and temple charging cradle with a dry, soft cloth. Use the provided cleaning wipe for the initial installation.
• Уникайте впливу води: The nose bridge mount is not designed for water exposure. Avoid getting it wet.
• Безпечне прикріплення: Ensure the nose bridge mount and temple charging cradle are securely attached to prevent accidental detachment or damage.
• Догляд за кабелем: Handle the magnetic charging cable with care. Avoid excessive bending or pulling to prevent damage. The cable is reinforced for durability.

Усунення несправностей

Зверніться до наступних поширених проблем та рішень:

• Glasses don't charge when worn? After the v20.0/21.0 update, the charging light may not light up while they are worn. Check the charging status in your Meta AI app.
• Why does the charging pause?
  1. Press the nose pad adhesive firmly.
  2. Ensure the battery module is charged.
  3. For Gen 2: Taking photos/videos while charging may cause it to pause. Simply reconnect.
• Uncomfortable fit? We recommend using nose pads. You can contact PrismXR for a free pair.
• Difficult to install? Please use the installation tool and follow our setup video guide.
• How much charge does the battery give the glasses? One battery module charges 1st Gen to ~60% and 2nd Gen to ~40%.

Технічні характеристики

Гарантія та підтримка

For any issues or questions regarding your PRISMXR Carina C1 Charging Set, please contact PRISMXR customer service. They are committed to providing support and will respond within 24 hours.

Please refer to the product packaging or the official PRISMXR webвеб-сайт для отримання конкретних деталей гарантії.