вступ
This manual provides comprehensive instructions for setting up, operating, and maintaining your LOFREE Flow2 Low-Profile Mechanical Keyboard. Please read this guide thoroughly before use to ensure optimal performance and longevity of your device.
Що в коробці
- LOFREE Flow2 Mechanical Keyboard (100 Keys)
- Кабель USB-C довжиною 1.5 м
- Приймач 2.4 ГГц
- 4 Replacement Keycaps (Windows/macOS specific)
- Посібник користувача (цей посібник)

Image: Contents of the LOFREE Flow2 keyboard package.
Налаштування
1. Power and Connection Mode Switch
Locate the power and connection mode switch on the underside of the keyboard, behind the flip-out feet. This switch allows you to select between Wired, Bluetooth (BT), and 2.4GHz wireless modes.

Зображення: Нижня сторона view of the keyboard with the mode switch.
2. Провідне підключення
To use the keyboard in wired mode, slide the switch to the 'Wired' position. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to your computer.
3. Бездротове з'єднання 2.4 ГГц
For 2.4GHz wireless mode, slide the switch to the '2.4G' position. Insert the 2.4GHz USB receiver into an available USB port on your computer. The keyboard should connect automatically. If not, press Fn + 4 (for 84/100-key models) or Fn + R (for 68-key models) to activate it.

Image: The keyboard highlighting its 1000Hz polling rate in wired and 2.4GHz modes.
4. Підключення Bluetooth
To connect via Bluetooth, slide the switch to the 'BT' position. On your computer or device, enable Bluetooth and search for available devices. Select 'LOFREE Flow2' from the list. To pair, press Fn + 1/2/3 (for 84/100-key models) or Fn + Q/W/E (for 68-key models) to select a Bluetooth channel.
5. System Compatibility Switch
The keyboard supports both Windows/Android and macOS/iOS systems. To switch between input systems, hold down Fn + N for Windows/Android or Fn + M for macOS/iOS. The keyboard comes with interchangeable keycaps for Windows and macOS layouts.

Image: Included Windows and macOS keycaps for system compatibility.
Інструкція з експлуатації
1. Side Touch Bar Functions
The LOFREE Flow2 features a side touch bar for quick adjustments. Swipe up or down on the touch bar to control volume. Hold the Fn key and swipe up or down to adjust screen brightness. To lock the touch bar and prevent accidental touches, press and hold Fn + пробіл приблизно на 3 секунди.

Image: The side touch bar for volume, brightness, and lock functions.
2. Налаштування підсвічування
Adjust the keyboard backlight by holding the Fn і натисканням кнопки Стрілка вліво or Стрілка вправо keys. There are three lighting modes: Steady On, Breathing, and Off.
3. Key Switches and Keycaps
The LOFREE Flow2 uses Cloud Switch Series low-profile mechanical switches. These switches are hot-swappable, allowing for customization. To remove keycaps, use the included keycap puller. For larger keycaps like the spacebar, pull from both sides separately to prevent stabilizer damage. To remove switches, use the included switch puller, aligning it with the switch clips and gently wiggling it upward.

Зображення: Розгорнуте view and specifications of the Surfer Linear switch.
4. QMK/VIA Compatibility
The keyboard supports QMK/VIA for advanced customization of key remapping, macros, and shortcuts. Refer to the official LOFREE website for detailed instructions on using QMK/VIA software.

Image: QMK/VIA software interface for keyboard customization.
Технічне обслуговування
- Прибирання: Use a soft, dry cloth to clean the keyboard surface. For deeper cleaning, remove keycaps and use compressed air to clear debris.
- Батарея: The keyboard features a 3000mAh battery. Recharge via the USB-C cable when the battery indicator shows low power. Avoid extreme temperatures.
- Зберігання: Store the keyboard in a cool, dry place away from direct sunlight and excessive moisture.
Усунення несправностей
- Клавіатура не реагує: Ensure the power switch is on and the correct connection mode (Wired, 2.4G, or BT) is selected. For wireless modes, check battery level.
- Проблеми зі сполученням Bluetooth: Ensure the keyboard is in Bluetooth mode and your device's Bluetooth is enabled. Try selecting a different Bluetooth channel (Fn + 1/2/3 or Fn + Q/W/E) and re-pairing.
- Ключі не реєструються: Check if the keycaps are properly seated. If using hot-swappable switches, ensure they are fully inserted.
- Підсвічування не працює: Adjust backlight settings using Fn + стрілка вліво/вправо keys. Ensure the keyboard is powered on.
Технічні характеристики
| Бренд | БЕЗКОШТОВНО |
| Номер моделі | OE926 |
| Розміри продукту | 15.67 x 4.96 x 0.52 дюймів |
| Вага товару | 1.97 фунта |
| Технологія підключення | Bluetooth, RF (2.4GHz), USB-C (Wired) |
| Опис клавіатури | Механічний, низькопрофільнийfile |
| Особливості | Backlit, Hot-Swappable, Programmable Keys, Rechargeable, Side Touch Bar |
| Колір | Срібло |
| матеріал | Алюміній |
| Акумулятор | Нестандартний акумулятор 3000 мАг (в комплекті) |
| Швидкість опитування | 1000Hz (Wired & 2.4GHz modes) |
Гарантія та підтримка
For warranty information, technical support, or further assistance, please visit the official LOFREE website or contact LOFREE customer service. Keep your purchase receipt for warranty claims.
Official LOFREE Store: LOFREE Store on Amazon
Офіційні відео про продукти
LOFREE Flow2 Low-Profile Механічна клавіатура закінченаview
Відео: Посадовець надview of the LOFREE Flow2 Low-Profile Механічна клавіатура, шоуasinйого дизайн та особливості.
How to Connect the Flow2 Keyboard
Video: A step-by-step guide on connecting the LOFREE Flow2 keyboard using its various modes.





