1. Вступ
This manual provides essential information for the safe and efficient operation of your OMTech AF 60W CO2 Laser Engraver. This versatile machine is designed for precision cutting and engraving across a wide range of materials, including wood, glass, acrylic, leather, and cardboard. Key features include a 28"x20" working area, autofocus, air assist, and 4-way pass-through capabilities for larger projects. The laser operates at Class 2 with 0.874 mW output power.
Малюнок 1: Закінченоview of the OMTech AF 60W CO2 Laser Engraver's main features.
2. Інформація про безпеку
Your OMTech AF 60W CO2 Laser Engraver is a Class 2 laser product. Adherence to safety guidelines is paramount to prevent injury and ensure proper machine function.
- Захист очей: Always wear appropriate laser safety glasses when operating the machine, even with the flame-resistant observation window.
- Вентиляція: Ensure the efficient exhaust system is properly connected and functioning to direct hazardous debris and fumes away from the engraving surface and into your ventilation system. Operating without adequate ventilation can be harmful.
- Пожежна безпека: Keep a fire extinguisher nearby. Never leave the machine unattended during operation, especially when cutting flammable materials.
- Аварійна зупинка: Ознайомтеся з розташуванням та принципом роботи кнопки аварійної зупинки.
- Сумісність матеріалів: Only engrave or cut materials approved for CO2 lasers. Avoid materials that produce toxic fumes or are highly reflective. Refer to the material compatibility table in the Operating section.
Figure 2: The flame-resistant window allows for safe observation during the engraving process.
3. Налаштування
Proper setup is crucial for optimal performance and safety. Follow these steps to prepare your laser engraver for use:
- Розпакування та розміщення: Carefully unpack the machine. Place it on a stable, level surface in a well-ventilated area, away from flammable materials.
- Connect Exhaust System: Attach the provided exhaust hose to the machine's exhaust port and route it to an external vent or a dedicated fume extractor.
- Connect Air Assist: Connect the air assist pump to the designated port on the machine. Air assist helps to clear debris and reduce scorching during operation.
- Connect Water Chiller: Connect the water chiller (or pump) to the laser tube's inlet and outlet ports. Ensure the chiller is filled with distilled water and operating correctly to maintain the laser tube's temperature.
- Підключення живлення: Підключіть машину до заземленої розетки.
- Встановлення програмного забезпечення: Install the necessary software (RDWorks, LightBurn, CorelDRAW, AutoCAD) on your computer and connect it to the laser engraver via USB or Ethernet.
- Initial Alignment & Focus: While machines are often pre-aligned, it is recommended to verify mirror alignment and focal length according to the detailed instructions in the full user manual. The autofocus function will assist with setting the correct focal distance.
Figure 3: The OMTech AF 60W Laser Engraver ready for setup.
4. Інструкція з експлуатації
Operating your OMTech laser engraver involves a few key steps to ensure precise and successful results.
4.1 Powering On and Control Panel
- Turn on the main power switch, then the laser power switch.
- Use the digital control panel to navigate menus, load files і налаштуйте параметри.
Figure 4: The digital control panel for easy operation and software compatibility.
4.2 Loading Materials and Autofocus
- Place your material on the appropriate workbed (honeycomb for cutting, blade for engraving). The machine features dual engraving beds.
- Utilize the autofocus function by pressing the dedicated button. This automatically sets the correct focal distance for your material, ensuring sharp and clean results.
Figure 5: The rapid autofocus feature eliminates manual adjustments.
4.3 Setting Parameters and 4-Way Pass-Through
- Adjust laser power and engraving/cutting speed in your software (RDWorks, LightBurn, etc.) based on the material and desired outcome. The maximum engraving speed is 600 mm/s.
- For oversized projects, utilize the 4-way pass-through doors. This allows you to feed longer or wider materials through the machine, expanding your working area beyond the 28"x20" bed.
Figure 6: The 4-way pass-through feature for handling large materials.
4.4 Сумісність матеріалів
The OMTech AF 60W CO2 Laser Engraver is compatible with a variety of materials for both engraving and cutting. Refer to the table below for common materials:
Figure 7: Material compatibility chart for engraving and cutting.
Відео 1: Оверview of the OMTech Laser Engraver, demonstrating its use for various projects and materials. This video is provided by OMTech Direct.
5. Технічне обслуговування
Регулярне технічне обслуговування забезпечує довговічність та стабільну роботу вашого лазерного граверу.
- Прибирання робочої зони: Regularly clean the honeycomb and blade workbeds to remove debris and residue from cutting and engraving. This prevents buildup that can affect material placement and laser performance.
- Чищення оптики: Periodically clean the laser lens and mirrors with appropriate optical cleaning solutions and wipes to maintain laser beam quality and power.
- Laser Tube Maintenance: Monitor the laser tube's performance. The high-performance 60W DC tube runs strong for up to 1,000 hours, and up to 12,000 hours when used efficiently at lower settings. Replacement is straightforward if needed.
- Технічне обслуговування водяного чилера: Ensure the water chiller is clean and filled with distilled water. Regularly check for proper water flow and temperature.
- Перевірка вихлопної системи: Inspect the exhaust fan and ducting for blockages or leaks to ensure efficient fume extraction.
6. Вирішення проблем
If you encounter issues with your OMTech laser engraver, consider the following common troubleshooting steps:
- Погана якість різання/гравірування: Check laser power and speed settings for the specific material. Verify lens and mirror cleanliness and alignment. Ensure the material is flat and properly focused.
- Лазер не працює: Confirm all safety interlocks (lid closed, water flow sensor) are engaged. Check the laser power supply and tube connections.
- Машина не відповідає: Verify power connections and software communication. Restart the machine and computer.
- Надмірний дим/випари: Inspect the exhaust system for blockages or fan malfunction. Ensure proper ventilation is established.
For more detailed troubleshooting or persistent issues, refer to the comprehensive user manual or contact OMTech customer support.
Відео 2: Повторнеview from 'Laser Guys from OMTech' discussing their experience with OMTech lasers, including setup and operation tips. This video is provided by OMTech Direct.
7. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | SH-G570 |
| Виробник | OMTech |
| Лазерний клас | Class 2 (0.874 mW output power) |
| Номінальна потужність | 60 Вт |
| Макс. Швидкість гравіювання | 600 мм/с |
| Робоча зона | 28 дюймів x 20 дюйма |
| Макс. глибина різання (деревина) | До 0.4 дюйма |
| Max. Cutting Depth (Acrylic) | До 0.8 дюйма |
| Термін служби лазерної трубки | Up to 1,000 hours (up to 12,000 hours with efficient use) |
| Вага машини | 249.1 фунт |
| Side/Side Pass Size | 19.7 дюймів x 0.8 дюйма |
| Розмір переднього/заднього проходу | 31.5 дюймів x 3.9 дюйма |
| Розміри машини | 47.2 см x 34.3 см x 36.6 см |
| Сумісність програмного забезпечення | RDWorks, LightBurn, CorelDRAW, AutoCAD |
Figure 8: Detailed specifications of the OMTech AF 60W Laser Engraver.
8. Гарантія та підтримка
OMTech is committed to providing excellent customer service and support for your laser engraver.
- Гарантія: Будь ласка, зверніться до документації щодо придбання, щоб дізнатися про конкретні гарантійні умови.
- Технічна підтримка: Benefit from U.S.-based technical support to resolve any issues you encounter.
- Обслуговування клієнтів: Access 24/7 online customer service for assistance.
- Support Duration: The product includes two-year support.
Щоб отримати додаткову допомогу, відвідайте OMTech Store або зверніться безпосередньо до їхньої служби підтримки.
