Посібник користувача мережевої карти Vertiv Liebert IntelliSlot RDU120

1. Вступ

The Vertiv Liebert IntelliSlot RDU120 Network Card is an advanced remote monitoring adapter designed to enhance the management capabilities of Vertiv products. This card facilitates secure and flexible communication, enabling real-time data access and system status monitoring for critical infrastructure.

1.1 продукт закінченоview

The RDU120 provides web access and data transmission via industry-standard protocols such as SNMP, Modbus, and BACNet. It supports environmental monitoring through compatible Geist Sensors for parameters like temperature, humidity, leak detection, and contact closures. Its UL2900-1 cybersecurity certification ensures secure online communication and data integrity.

1.2 Основні характеристики

• UL2900-1 Cybersecurity Certified: Ensures secure online communication.
• Secure Boot with Hardware Trust Anchor: Prevents unauthorized software tampering.
• Гнучка комунікація: Supports SNMP, Modbus, and BACnet protocols.
• Standard RESTful API Support: Facilitates easy configuration and updates.
• 1 Гбіт/с Ethernet: Compatible with modern network environments and web браузерів.
• Екологічний моніторинг: Supports Geist Sensors for various environmental parameters.

2. Інформація про безпеку

Please read and understand all safety instructions before installing or operating the Vertiv Liebert IntelliSlot RDU120 Network Card. Failure to follow these instructions may result in injury, damage to the product, or voiding of the warranty.

• Ensure the host device is powered off and disconnected from the power source before installation.
• Handle the network card by its edges to avoid touching electronic components.
• Use appropriate electrostatic discharge (ESD) precautions when handling the card.
• Не піддавайте картку впливу вологи або екстремальних температур.
• Only use accessories and cables approved by Vertiv.

3. Вміст упаковки

Переконайтеся, що всі предмети є в наявності та не пошкоджені, відкривши упаковку:

• Vertiv Liebert IntelliSlot RDU120 Network Card
• Короткий посібник (якщо застосовується)
• Монтажні гвинти (якщо є)

Якщо будь-які товари відсутні або пошкоджені, негайно зверніться до постачальника.

4. Продукт закінчивсяview

Familiarize yourself with the physical components and ports of the RDU120 Network Card.

Рисунок 4.1: Загалом view of the RDU120 Network Card, displaying the circuit board and connectors.

Рисунок 4.2: Кутовий view of the RDU120, showing the front panel and card profile.

Малюнок 4.3: Детально view of the RDU120 front panel, indicating port labels.

Малюнок 4.4: Сторона view of the RDU120, showing its form factor and mounting bracket.

4.1 Front Panel Ports and Indicators

• Порт Ethernet (RJ45): For 1 Gb network connectivity.
• Порт USB: For local configuration or firmware updates.
• RS-485/232 Ports: For serial communication with compatible devices.
• Activity/Link LEDs: Indicate network activity and connection status.

5. Налаштування

5.1 Етапи встановлення

1. Power Down Host Device: Ensure the Vertiv equipment where the RDU120 will be installed is completely powered off and unplugged.
2. Locate IntelliSlot Bay: Identify the dedicated IntelliSlot bay on your Vertiv device.
3. Insert RDU120 Card: Carefully slide the RDU120 Network Card into the IntelliSlot bay until it is fully seated. Ensure the front panel aligns with the device's chassis.
4. Безпечна картка: Use any provided screws or retention clips to secure the card in place.
5. Підключіть мережевий кабель: Connect a standard Ethernet cable from your network switch or router to the Ethernet port on the RDU120 front panel.
6. Power On Host Device: Reconnect power to the Vertiv equipment and power it on. The RDU120 will initialize with the host device.

5.2 Початкова конфігурація

Upon initial power-up, the RDU120 will typically obtain an IP address via DHCP. If DHCP is not available or a static IP is required, refer to the detailed configuration guide available on the Vertiv support webсайт.

• Доступ до Web Інтерфейс: Відкрийте a web browser and enter the IP address of the RDU120. If DHCP is used, you may need to use a network scanner or the host device's interface to find the assigned IP.
• Облікові дані за замовчуванням: Use the default username and password provided in the product documentation for initial login. Change these immediately for security.
• Налаштування мережі: Configure static IP address, subnet mask, gateway, and DNS servers as per your network requirements.

6. Операційна

6.1 Web Навігація по інтерфейсу

The RDU120's web interface provides comprehensive control and monitoring capabilities. Navigate through the menus to access various settings and data points.

• Приладова панель: Забезпечує надview of system status, alarms, and key parameters.
• Моніторинг: View real-time data, historical trends, and sensor readings.
• Конфігурація: Adjust network settings, user accounts, and communication protocols.
• Alarms & Notifications: Set up alarm thresholds and configure email/text message alerts.

6.2 Дані моніторингу

The RDU120 supports various protocols for data integration with Building Management Systems (BMS) and network monitoring tools.

• SNMP (Простий протокол керування мережею): Use SNMP v1/v2c/v3 for polling data and receiving traps. Refer to the MIB file for OID definitions.
• Modbus: Access data via Modbus TCP/IP. Consult the Modbus register map for details.
• BACnet: Integrate with BACnet/IP systems for building automation.

6.3 Alarm and Notification Management

Configure the RDU120 to send alerts for critical events:

• Define alarm thresholds for monitored parameters (e.g., temperature, voltagд).
• Configure email recipients and SMTP server settings for email notifications.
• Set up SMS gateway for text message alerts (if supported by your service provider).

6.4 Моніторинг навколишнього середовища

When connected to compatible Geist Sensors, the RDU120 can monitor environmental conditions:

• Температура і вологість: Monitor ambient conditions in server racks or rooms.
• Виявлення витоку: Detect water leaks to prevent equipment damage.
• Door Closures: Monitor access to cabinets or rooms.

7. Технічне обслуговування

7.1 оновлень мікропрограми

Регулярно перевіряйте службу підтримки Vertiv webсайт для отримання останніх оновлень прошивки. Оновлення прошивки можуть забезпечити нові функції, покращення продуктивності та безпеки.

• Завантажте відповідну прошивку file from the Vertiv webсайт.
• Access the firmware update section in the RDU120 web інтерфейс.
• Follow the on-screen instructions to upload and install the firmware. Do not power off the device during the update process.

7.2 System Backup and Restore

It is recommended to back up the RDU120's configuration settings periodically, especially before major changes or firmware updates.

• Export configuration settings from the web інтерфейс.
• Store the backup file у безпечному місці.
• Use the restore function to revert to a previous configuration if needed.

8. Вирішення проблем

This section provides solutions to common issues you might encounter with the RDU120 Network Card.

For more complex issues, refer to the comprehensive troubleshooting guide on the Vertiv support website or contact Vertiv technical support.

9. Технічні характеристики

Technical specifications for the Vertiv Liebert IntelliSlot RDU120 Network Card:

10. Гарантія та підтримка

10.1 Інформація про гарантію

Vertiv products are backed by a standard limited warranty. For specific warranty terms and conditions applicable to your RDU120 Network Card, please refer to the warranty documentation included with your purchase or visit the official Vertiv webсайт.

10.2 Технічна підтримка

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Vertiv Technical Support. Support contact information can be found on the official Vertiv webсайт:

Офіційний представник Vertiv Webсайт: www.vertiv.com

Please have your product model number (RDU120) and serial number ready when contacting support.