1. Вступ
Welcome to the instruction manual for your XLX 3.7V Cordless Electric Screwdriver. This versatile tool is designed for various home repair and DIY projects, offering convenience and efficiency. Please read this manual thoroughly before use to ensure safe and optimal performance.
2. Важливі інструкції з техніки безпеки
Завжди дотримуйтесь основних запобіжних заходів під час використання електроінструментів, щоб зменшити ризик пожежі, ураження електричним струмом та травмування.
- Тримайте своє робоче місце чистим і добре освітленим. Засмічені або темні місця сприяють нещасним випадкам.
- Не використовуйте електроінструменти у вибухонебезпечних середовищах, наприклад, у присутності легкозаймистих рідин, газів або пилу. Електроінструменти створюють іскри, які можуть запалити пил або пари.
- Під час роботи з електроінструментом не допускайте дітей та сторонніх осіб. Відволікання може призвести до втрати контролю.
- Wear appropriate personal protective equipment, including eye protection, hearing protection, and suitable gloves.
- Уникайте випадкового запуску. Переконайтеся, що вимикач знаходиться у вимкненому положенні, перш ніж підключати акумуляторну батарею, брати або переносити інструмент.
- Do not overreach. Maintain proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Від’єднайте акумуляторну батарею від електроінструмента перед виконанням будь-яких налаштувань, заміною аксесуарів або зберіганням електроінструменту. Такі запобіжні заходи безпеки зменшують ризик випадкового запуску електроінструмента.
- Зберігайте невикористані електроінструменти в недоступному для дітей місці та не дозволяйте особам, які не знайомі з електроінструментом або не знайомі з цими інструкціями, працювати з ним.
- Доглядайте за електроінструментами та аксесуарами. Перевірте, чи немає невідповідності або заїдання рухомих частин, поломки частин та будь-яких інших умов, які можуть вплинути на роботу електроінструмента. Якщо електроінструмент пошкоджено, відремонтуйте його перед використанням.
- Використовуйте електроінструмент, аксесуари та насадки тощо відповідно до цих інструкцій, враховуючи умови роботи та роботу, яку необхідно виконати. Використання електроінструменту для операцій, відмінних від призначених, може призвести до небезпечної ситуації.
- Не використовуйте інструмент, якщо вимикач не вмикає та не вимикає його. Будь-який електроінструмент, яким не можна керувати за допомогою перемикача, є небезпечним і потребує ремонту.
- Do not abuse the charging cable. Never use the cable for carrying, pulling or unplugging the power tool. Keep cable away from heat, oil, sharp edges or moving parts.
- Не піддавайте електроінструменти впливу дощу або вологи. Попадання води в електроінструмент збільшує ризик ураження електричним струмом.
3. Вміст упаковки
Перевірте, чи всі перелічені нижче предмети входять до вашої упаковки:
- 1x XLX Cordless Electric Screwdriver
- 1x USB-Type C Charging Cable
- 12x Screwdriver Bits (compatible with Phillips, Slotted, and Hex screws)
- 1x Magnetic Screwdriver Extender (24MM/50MM)

This image displays all components included in the XLX 3.7V Cordless Electric Screwdriver package: the screwdriver unit, a USB-Type C charging cable, a set of 12 versatile screwdriver bits, and a magnetic screwdriver extender.
4. Особливості продукту
- Powerful & Cordless Lithium-Ion Battery: Equipped with a 900mAh rechargeable lithium-ion battery (3.7V DC), this electric screwdriver delivers long-lasting performance with a 3–5-hour charging time via USB-Type C (cable included). Enjoy cordless convenience for home repairs without frequent recharging.
- High Torque & Precision Control: Boasts 3.0N.m max electric torque and 10.0N.m manual torque for tackling stubborn screws, paired with a 245RPM speed for efficient yet controlled driving. Perfect for appliances, electronics, furniture, and DIY projects.
- 12 Versatile Bits + Dual-Length Shafts: Includes 12 screwdriver bits (compatible with Phillips, slotted, and hex screws) and two magnetic extension shafts (24MM/50MM) to fit tight spaces or deep recesses. A complete toolkit for diverse repair needs.
- Built-in LED Light for Dark Spaces: The integrated LED light illuminates dimly lit work areas (e.g., under cabinets, car interiors, or electrical panels), ensuring accuracy even in low-light conditions.
- Компактний та ергономічний дизайн: Lightweight and pocket-sized for easy handling, with a non-slip grip for comfort during prolonged use. Ideal for professionals and home users alike.

This image demonstrates the integrated LED light illuminating a screw in a dark cabinet, highlighting its utility in low-light conditions.

This image shows key features of the screwdriver: the USB charging port, hook rings for portability, and the direction buttons for forward and reverse operation.

This image illustrates the compact and portable design of the XLX electric screwdriver, easily fitting into a pocket for convenient transport.
5. Налаштування
5.1 Заряджання батареї
Before first use, or when the battery is low, charge the screwdriver:
- Locate the USB-Type C charging port on the screwdriver.
- Connect the provided USB-Type C cable to the screwdriver and a compatible USB power source (e.g., wall adapter, computer USB port).
- Allow 3-5 hours for a full charge. The indicator light will typically illuminate during charging and change or turn off when fully charged.
5.2 Attaching Screwdriver Bits
To prepare the screwdriver for use:
- Select the appropriate screwdriver bit for your task from the included 12-piece set.
- Insert the bit firmly into the magnetic chuck at the front of the screwdriver. Ensure it is seated securely.
- For reaching screws in tight or deep spaces, first insert one of the magnetic extension shafts into the chuck, then insert the desired bit into the extender.
6. Інструкція з експлуатації
6.1 Робота вперед та назад
The screwdriver features two direction buttons for driving and removing screws:
- Натисніть кнопка вперед (usually indicated by an arrow pointing away from the handle) to drive screws in.
- Натисніть reverse button (usually indicated by an arrow pointing towards the handle) to remove screws.
6.2 Використання світлодіодного освітлення
The integrated LED light automatically activates when either the forward or reverse button is pressed, providing illumination for your work area, especially in dimly lit conditions.
6.3 Ручне керування
For stubborn screws or when more precise control is needed, the screwdriver can also be used manually. Simply hold the screwdriver firmly and turn it by hand. The maximum manual torque is 10.0N.m, allowing you to apply additional force beyond the electric motor's capacity.

This image illustrates the wide range of applications for the XLX electric screwdriver, including assembling furniture, working on electronics, and general home repairs.
7. Технічне обслуговування
Правильне обслуговування забезпечує довговічність та оптимальну роботу вашої викрутки.
- Прибирання: Wipe the screwdriver with a dry, soft cloth after each use. Do not use harsh chemicals, abrasive cleaners, or immerse the tool in water.
- Зберігання: Store the screwdriver and its accessories in the provided case in a dry, cool place, away from direct sunlight, moisture, and extreme temperatures.
- Догляд за акумулятором: To prolong battery life, avoid fully discharging the battery frequently. Recharge the battery periodically (e.g., every 3-6 months) even if the tool is not in regular use.
- Обслуговування долота: Keep screwdriver bits clean and free of debris. Replace worn or damaged bits to ensure effective operation and prevent damage to screw heads.
8. Вирішення проблем
Зверніться до таблиці нижче, щоб дізнатися про поширені проблеми та їх вирішення.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Screwdriver not turning on. | Акумулятор розряджений. | Charge the battery for 3-5 hours using the provided USB-Type C cable. |
| Викрутці бракує потужності/крутного моменту. | Battery is low or screw is too tight for electric mode. | Recharge the battery. For very tight screws, apply manual torque or pre-drill a pilot hole if appropriate. |
| Screwdriver bit falls out of chuck. | Bit not fully inserted or magnetic chuck is dirty. | Ensure the bit is fully inserted and seated securely. Clean the magnetic chuck if necessary to improve magnetic hold. |
9. Технічні характеристики
Technical details for the XLX 3.7V Cordless Electric Screwdriver:
| Особливість | Деталь |
|---|---|
| Бренд | XLX |
| Номер моделі | Screwdriver01 |
| Тип батареї | Літій-іонний акумулятор |
| Ємність акумулятора | 900 мАг |
| томtage | 3.7 В (DC) |
| Максимальний електричний крутний момент | 3.0 Нм |
| Максимальний ручний крутний момент | 10.0 Нм |
| швидкість | 245 об/хв |
| Час зарядки | 3-5 годин |
| Вага товару | 12.3 унції |
| Розміри упаковки | 7.13 x 3.43 x 1.93 дюймів |
| Особливості | Built-in LED Light, Automatic/Manual Mode |
10. Гарантія та підтримка клієнтів
For warranty information or technical support regarding your XLX 3.7V Cordless Electric Screwdriver, please refer to the product packaging or contact XLX customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.





