CIUZL C94

CIUZL Dog Training Collar C94 User Manual

Model: C94 | Brand: CIUZL

вступ

This manual provides detailed instructions for the safe and effective use of your CIUZL Dog Training Collar, Model C94. Please read this manual thoroughly before operating the device to ensure proper functionality and the well-being of your dog.

Компоненти продукту

The CIUZL Dog Training Collar package includes the following items:

CIUZL Dog Training Collar components including remote, receiver, charging cable, probes, and test tool.

Image: All included components of the CIUZL Dog Training Collar system.

Налаштування

1. Заряджання пристроїв

Before initial use, fully charge both the remote control and the receiver collar. A full charge typically takes 2 hours. For the first charge, ensure both devices are charged for 4 hours.

CIUZL Dog Training Collar remote and receiver connected to a charging cable.

Image: Charging the remote control and receiver collar.

2. Attaching the Collar Receiver

Thread the receiver unit onto the nylon collar strap. Ensure the contact points are facing inwards towards the dog's neck.

3. Примірка коміра

Proper collar fit is crucial for effectiveness and your dog's comfort. The collar should be snug, allowing two fingers to fit comfortably between the strap and your dog's neck. The contact points must touch the dog's skin. Avoid overtightening.

Diagram showing how to adjust the CIUZL Dog Training Collar for proper fit on various dog sizes.

Image: Instructions for adjusting the collar strap and ensuring proper fit.

4. Selecting and Installing Probes

The collar comes with two sizes of metal probes and corresponding silicone covers:

Always use the conductive silicone covers over the metal probes to protect your dog's skin and enhance comfort during training.

Diagram illustrating the use of short and long probes with silicone covers for different dog hair lengths.

Image: Guide for selecting appropriate probes and using silicone covers.

Інструкція з експлуатації

The CIUZL Dog Training Collar offers three primary training modes and two light modes, controlled by the remote.

1. Сполучення пульта дистанційного керування та приймача

To pair the remote and receiver, ensure both devices are powered on. Press and hold the pairing button on the receiver collar until its indicator light flashes rapidly. Then, press a mode button on the remote control to complete the pairing process. The indicator light on the receiver will become solid when successfully paired. (Refer to the included physical user manual for precise steps if needed.)

2. Режими навчання

The remote control allows you to select and adjust the intensity of three training modes:

Image depicting the three training modes: Beep, Vibration, and Safety Shock, with their respective intensity levels.

Зображення: Оверview of the three effective training modes.

3. Режими освітлення

The receiver collar features two light modes for visibility and locating your dog in low-light conditions:

Image demonstrating the flashing light and constant white light modes on the CIUZL Dog Training Collar for night visibility.

Image: Explanation of the two safety anti-lost light modes.

4. Діапазон пульта дистанційного керування

The remote control has an extended range of up to 3300 feet (approximately 1000 meters), allowing for training in various environments such as backyards, parks, or beaches.

Image illustrating the 3300ft remote control range of the CIUZL Dog Training Collar in an outdoor setting.

Image: Visual representation of the 3300ft remote range.

Технічне обслуговування

1. прибирання

Regularly clean the collar strap and receiver unit. Use a damp cloth to wipe away dirt and debris. Ensure the contact points are clean and free of buildup to maintain proper function.

2. Догляд за акумулятором

3. Рейтинг водонепроникності

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This allows your dog to play in water, swim, or be used in rainy conditions. The remote control is only splash-proof and should be kept away from water.

A dog splashing in water, illustrating the IPX7 waterproof capability of the CIUZL Dog Training Collar receiver.

Image: The IPX7 waterproof receiver collar allows for use in various wet conditions.

Усунення несправностей

проблемаМожлива причинаРішення
Нашийник не реагує на пульт дистанційного керування.Низький заряд батареї на будь-якому з пристроїв; пристрої не сполучені; поза зоною досяжності.Charge both devices fully. Re-pair the remote and receiver. Ensure devices are within the 3300ft range.
No stimulation/vibration/beep.Incorrect collar fit; probes not making contact; intensity level too low.Adjust collar for snug fit. Ensure probes touch skin. Increase intensity level. Use the test bulb tool to verify function.
Dog shows discomfort or skin irritation.Collar worn for too long; improper fit; probes causing pressure.Remove collar immediately. Check for redness or sores. Ensure collar is not worn for more than 12 hours a day. Re-adjust fit and ensure silicone covers are used. Consult a veterinarian if irritation persists.
Дисплей пульта дистанційного керування порожній.Низький заряд батареї; пристрій вимкнено.Charge the remote. Press the power button to turn it on.

Технічні характеристики

Гарантія та підтримка

Your CIUZL Dog Training Collar, Model C94, is covered by a Гарантія 2 рік з дати покупки.

For any questions, technical assistance, or warranty claims, please contact CIUZL customer support. Refer to the product packaging or the seller's information for contact details.

Image detailing 2-year warranty and 7x24 hours online service for CIUZL products.

Image: Warranty and customer support information.

Пов'язані документи - C94

попередньоview Dog Training Collar Model C94 Instruction Manual
Comprehensive instruction manual for the Shenzhen Papani Pet Products Model C94 Dog Training Collar, covering package contents, product description, safety information, operating guide, features, usage, training tips, pairing, Q&A, troubleshooting, maintenance, and FCC compliance.
попередньоview Схема деталей кутової шліфувальної машини Bosch GWS 750S (3 601 C94 1R1)
Детальний розібраний view Схема кутової шліфувальної машини Bosch GWS 750S (модель 3 601 C94 1R1) із зазначенням усіх компонентів з номерами деталей. Містить важливі інструкції з техніки безпеки щодо обслуговування вугільних щіток.
попередньоview Кутова шліфувальна машина Bosch GWS 750-125 у розібраному вигляді View Схема та список деталей
Детальний розібраний view Схема та розбивка деталей кутової шліфувальної машини Bosch GWS 750-125 (модель 3 601 C94 080), включаючи ідентифікацію компонентів та важливі примітки щодо складання.
попередньоview CNC4PC C94 Багатофункціональна плата з ЧПК Посібник користувача
Посібник користувача для багатофункціональної плати ЧПК CNC4PC C94 з детальним описом її функцій, специфікацій, опису плати, клем живлення, специфікацій вводу/виводу, схеми підключення.ampрозміри та розміри.
попередньоview Посібник користувача багатофункціональної плати ЧПК CNC4PC C94, версія 2
Детальний посібник користувача для багатофункціональної плати ЧПК CNC4PC C94 (UC300ETH). Охоплює функції, характеристики вводу/виводу, клеми живлення, порти розширення, схеми підключення.ampфайли та конфігурація.
попередньоview Інструкції з складання та список деталей для STACK RC Cobra '94 Sport
Детальна інструкція зі складання та перелік деталей для радіокерованої машини STACK RC Cobra '94 Sport. Містить покрокові інструкції та ідентифікацію деталей.