Продукт закінченийview
The xTool M1 Ultra is a versatile 4-in-1 craft machine designed for creative projects. It integrates laser engraving, vinyl cutting, inkjet printing, and pen drawing functionalities into a single unit. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.
Основні можливості
The M1 Ultra offers a range of features to enhance your crafting experience:
- 4-in-1 Crafting Machine: Поєднує лазерне гравірування, різання вінілу, струменевий друк та малювання ручкою.
- Smart Combos, Easy for All: Features an Easy Swap Design for quick module changes between laser engraving, blade cutting, foiling, color printing, and pen drawing.
- Beginner-Friendly Design with Pro-Level Results: Pre-assembled, Class I laser engraver with snapshot preview and pinpoint positioning. Utilizes XCS software with Artimind AI for simplified operation.
- Універсальність матеріалу: Compatible with over 1000 materials, including soft, hard, thin, thick, flat, and 3D curved surfaces.
- Креативні програми: Suitable for personalized gifts, home decor, custom greeting cards, unique clothing, and holiday decorations.
- Лазерний вихід: 10W laser output (Model Number: MLM-K501-001).
Початкове налаштування
Розпакування та розміщення
Carefully remove the xTool M1 Ultra from its packaging. Place the machine on a stable, level surface with adequate ventilation. Ensure there is sufficient space around the unit for safe operation and material handling.
Підключення живлення
Підключіть адаптер живлення до пристрою, а потім до відповідної розетки.
Встановлення програмного забезпечення
Завантажте та встановіть програмне забезпечення xTool Creative Space (XCS) з офіційного сайту xTool. webсайт. Дотримуйтесь інструкцій на екрані, щоб завершити встановлення.
Інструкція з експлуатації
Загальний процес
- Матеріал місця: Open the machine lid and place your chosen material onto the working platform.
- Design and Start: Use the xTool Creative Space (XCS) software to create or import your design. The software features snapshot preview and pinpoint positioning for accuracy.
- Execute Project: Initiate the laser engraving, cutting, printing, or drawing process through the software.
Module Switching
The M1 Ultra features an Easy Swap Design. To switch between functions (laser, blade, inkjet, pen), carefully remove the current module and install the desired one according to the instructions provided in the software or quick start guide.
Using xTool Creative Space (XCS) Software
XCS software includes Artimind AI for converting text to artwork and offers over 500 preset parameters for various materials, simplifying the design and execution process.
Важлива інформація з безпеки
The xTool M1 Ultra is a Class I laser engraver, designed with safety in mind for home use. Adhere to the following safety measures:
- Eye-protecting Cover: Always keep the orange lid closed during laser operation to protect your eyes from laser radiation.
- Lid-open Stop Design: The machine will automatically pause operation if the lid is opened during a task.
- Виявлення нахилу: The machine is equipped with sensors to detect tilting, which can halt operation to prevent accidents.
- AI Fire Detection: Integrated AI technology helps detect potential fire hazards and can alert users or pause operations.
- Ensure proper ventilation when operating the machine, especially during laser engraving or cutting, to dissipate fumes.
- Не залишайте машину без нагляду під час роботи.
Догляд та обслуговування
Regular maintenance ensures optimal performance and longevity of your xTool M1 Ultra.
Очищення машини
- Power off and unplug the machine before cleaning.
- Використовуйте м’яку суху тканину, щоб протерти зовнішню поверхню.
- Gently clean the laser lens and mirrors with a specialized lens cleaning kit to maintain laser performance.
- Remove debris from the working platform and exhaust vents.
Module Care
- Inspect laser and blade modules for wear or damage. Replace blades as needed.
- Ensure inkjet cartridges are properly seated and replace them when ink levels are low.
Поширені проблеми та рішення
This section addresses frequently encountered problems. For more detailed troubleshooting, refer to the xTool official support resources.
Машина не вмикається
- Check power cable connections to the machine and outlet.
- Перевірте справність розетки.
Laser Not Firing or Weak Output
- Ensure the laser module is correctly installed.
- Clean the laser lens and mirrors.
- Check material settings in XCS software; adjust power and speed as necessary.
Cutting Issues (Blade or Laser)
- For blade cutting, ensure the blade is sharp and correctly installed. Check material thickness and adjust cutting force.
- For laser cutting, verify material parameters and ensure the material is flat on the platform.
Software Connection Problems
- Restart the machine and your computer.
- Check USB cable connection or Wi-Fi settings.
- Ensure XCS software is updated to the latest version.
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Розміри продукту | 19.61 x 7.24 x 24.41 дюйма; 54 фунтів |
| Номер моделі товару | M1 Ultra |
| Дата першої доступності | 10 березня 2025 р |
| Виробник | Makeblock Co., Ltd. |
| ASIN | B0DSP7VML9 |
| Бренд | xTool |
| матеріал | пластик |
| Колір | Білий |
| Активна площа поверхні | 12 дюйма на 12 дюйма |
| Режим роботи | Автоматичний |
| Лазерний вихід | 10 Вт |
Гарантія та підтримка клієнтів
xTool provides comprehensive support for its products.
Плани захисту
Extended protection plans are available for purchase to cover your device beyond the standard warranty. Options include 3-Year and 4-Year plans, offering additional peace of mind for your investment.
Підтримка клієнтів
For technical assistance, troubleshooting, or warranty inquiries, please contact xTool customer support through their official channels. Support options may include email, live chat, phone, and community forums, ensuring you receive timely help from the manufacturer, Makeblock Co., Ltd.
