Hormann FIT 2-1 BS Wireless Push Button Instruction Manual

1. Продукт закінчивсяview

The Hormann FIT 2-1 BS Push Button is a 2-button wireless transmitter designed for controlling automated systems. It operates at a frequency of 868.35 MHz and utilizes BiSecur technology for secure communication. This device allows for the control of two different motorizations or two distinct functions on the same automated system. It is intended exclusively for indoor use in a dry environment.

The push button is easy to install and is powered by two 1.5V LR03/AAA batteries, which are included. The package also contains an installation manual and mounting accessories to facilitate setup.

Малюнок 1: Спереду view of the Hormann FIT 2-1 BS Wireless Push Button, showing the two control buttons.

2. Технічні характеристики

3. Сумісність

The Hormann FIT 2-1 BS is compatible with Hormann motorizations that utilize BiSecur technology. It is also retro-compatible with older 868 MHz fixed code motorizations.

Compatible motorizations include:

• SupraMatic
• ProMatic
• RotaMatic
• LineaMatic
• VersaMatic

It can also be used with key switches such as:

• ESA 40
• ESU 40
• КРОК 40
• STUP 40
• КРОК 50
• STUP 50

Important: Verify compatibility with your existing motorizations before installation.

4. Налаштування та встановлення

The Hormann FIT 2-1 BS push button is designed for easy installation. It comes with all necessary mounting accessories.

4.1. Розпакування та первинний огляд

• Carefully unpack the push button and all accessories.
• Переконайтеся, що всі компоненти, перелічені в упаковці, присутні.
• Огляньте пристрій на наявність видимих ​​пошкоджень.

4.2. Встановлення батареї

The device is powered by two 1.5V LR03/AAA batteries. These are typically pre-installed or included separately.

• Locate the battery compartment, usually on the back or side of the unit.
• Відкрийте кришку відділення.
• Insert the two LR03/AAA batteries, ensuring correct polarity (+/-).
• Надійно закрийте кришку батарейного відсіку.

Малюнок 2: Сторона view of the push button, indicating the location of the battery compartment.

4.3. Монтаж кнопки

The push button must be installed in a dry, indoor environment.

• Choose a suitable indoor location for mounting, ensuring it is dry and easily accessible.
• Use the provided mounting accessories (screws, wall plugs) to securely attach the push button to the wall.
• Ensure the device is firmly fixed and does not wobble.

4.4. Programming the Buttons

The programming procedure links the push button to your Hormann motorization(s).

• Refer to the detailed programming instructions provided in the included manual.
• Typically, this involves activating a programming mode on your motorization unit and then pressing the desired button on the FIT 2-1 BS push button.
• Repeat the process for the second button if you wish to control another motorization or function.
• Test the functionality after programming to ensure successful pairing.

5. Інструкція з експлуатації

Once programmed, operating the Hormann FIT 2-1 BS is straightforward.

• Натисніть upper button to activate the first programmed function or motorization (e.g., open/close garage door).
• Натисніть lower button to activate the second programmed function or motorization (e.g., partial opening, light control).
• The device transmits a secure BiSecur signal to your receiver.

Рисунок 3: Кутовий view of the push button, highlighting the two distinct control surfaces.

6. Технічне обслуговування

The Hormann FIT 2-1 BS requires minimal maintenance to ensure reliable operation.

6.1. прибирання

• Wipe the surface of the push button with a soft, dry cloth.
• Не використовуйте абразивні засоби для чищення, розчинники або агресивні хімікати, оскільки вони можуть пошкодити casing.

6.2. Заміна батареї

When the batteries are low, the device's indicator light (if present) may flash or its range may decrease. Replace batteries as follows:

• Відкрийте батарейний відсік, як описано в розділі 4.2.
• Remove the old 1.5V LR03/AAA batteries.
• Insert new 1.5V LR03/AAA batteries, observing correct polarity.
• Утилізуйте старі батарейки відповідно до місцевих правил.

7. Вирішення проблем

If the push button is not functioning as expected, consider the following:

• No response from motorization:
  • Перевірте, чи батарейки правильно вставлені та чи не розряджені. За потреби замініть їх.
  • Ensure the push button is within the operating range of the motorization's receiver.
  • Verify that the push button is correctly programmed to the motorization. Refer to the programming instructions.
  • Check for any obstructions between the push button and the receiver that might block the signal.
• Переривчаста робота:
  • Це може свідчити про низький заряд батареї. Замініть батареї.
  • Ensure there is no significant radio interference in the area.
• Push button not mounting securely:
  • Ensure you are using appropriate screws and wall plugs for your wall type.
  • Avoid over-tightening screws, which can damage the casing.

If problems persist after following these steps, consult the full product manual or contact Hormann customer support.

8. Інформація про безпеку та попередження

• The push button must be installed exclusively in a dry, indoor environment. Do not expose it to moisture, rain, or extreme temperatures.
• Не відкривайте пристрій casing beyond the battery compartment, except for authorized service personnel.
• Зберігайте батареї в недоступному для дітей місці. При проковтуванні негайно зверніться за медичною допомогою.
• Ensure proper disposal of used batteries according to local environmental regulations.
• Цей пристрій не є іграшкою. Зберігати подалі від дітей.
• Always ensure the area around the motorization is clear before operating to prevent injury or damage.

Малюнок 4: Сторона view of the push button, illustrating its compact design and potential security indicators.

9. Інформація про гарантію

Specific warranty details for the Hormann FIT 2-1 BS Wireless Push Button are not provided in the product description. Please refer to the warranty card included with your purchase or contact your retailer for information regarding warranty terms and conditions.

10. Підтримка та контакти

Contact information for direct customer support is not provided in the product description. For technical assistance, troubleshooting, or further inquiries, please refer to the official Hormann webсайт або зверніться до продавця, у якого ви придбали товар.