Інструкція з експлуатації роторного лазерного рівня Firecore FRL300R

1. Вступ

The Firecore FRL300R Rotary Laser Level Kit is a professional-grade tool designed for a wide range of construction and leveling applications. This self-leveling horizontal rotary laser provides precise elevation control over large areas, enhancing productivity for tasks such as grading, excavating, patio decks, terraces, swimming pools, landscaping, and septic systems. Its robust design ensures durability and reliability in demanding jobsite environments.

Figure 1: The Firecore FRL300R Rotary Laser Level Kit, including the main unit, receiver, and hard carrying case.

2. Інформація про безпеку

Always read and understand all safety warnings and instructions before operating the Firecore FRL300R Rotary Laser Level. Failure to follow these instructions may result in serious injury.

2.1 Лазерна безпека

This product emits a Class 2 laser beam (IEC/EN60825-1/2014 <1mW). Observe the following precautions:

• НЕ РОБИТЬ дивіться прямо в лазерний промінь.
• НЕ РОБИТЬ навмисно спрямовувати лазерний промінь на інших людей або поверхні, що відбивають світло.
• Always use the provided red laser glasses to enhance visibility and protect your eyes when working with the laser.
• Ensure the laser is positioned so that the beam is above or below eye level whenever possible.

2.2 Безпека акумулятора

• Use only the specified Li-ion battery and charging accessories provided with the kit.
• Не піддавайте акумулятор дії екстремальних температур, прямих сонячних променів або вогню.
• Не розбирайте, не ламайте та не проколюйте акумулятор.
• Утилізуйте батареї згідно з місцевими правилами.

3. Вміст упаковки

Verify that all items listed below are included in your Firecore FRL300R Rotary Laser Level Kit:

• 1x FRL300R Rotary Laser
• 1x пульт дистанційного керування
• 1x Red Laser Glasses
• 1x Li-ion Battery with Type-C Charging Port
• 1x адаптер 5 В/1 А
• 1x кабель для зарядки
• 1x Red Target Plate
• 1x Receiver with a Clamp
• 1x Посібник користувача
• 1x Жорсткий футляр для перенесення

Figure 2: All included components of the FRL300R kit.

4. Налаштування

4.1 Заряджання батареї

The FRL300R is powered by a rechargeable Li-ion battery. Before first use, fully charge the battery. Connect the provided charging cable to the Type-C charging port on the laser level and plug the 5V/1A adapter into a power outlet. A full charge provides up to 15 hours of working time.

Figure 3: The FRL300R supports multiple charging methods via its Type-C port.

4.2 Початкове розміщення та монтаж

Place the FRL300R on a stable, level surface or mount it securely onto a tripod. Ensure the area is clear of obstructions that might interfere with the laser beam. The unit is designed with a robust 4-handle ergonomic design for easy handling.

Figure 4: The FRL300R features a robust 4-handle ergonomic design for secure handling.

5. Інструкція з експлуатації

5.1 Увімкнення та самонівелювання

Press the power button to turn on the FRL300R. The unit features electronic horizontal self-leveling, automatically leveling itself within 5° in approximately 15 seconds. If the device is disturbed during operation, it will automatically re-level. The self-leveling motors are accurate to ±10 seconds.

Малюнок 5: Збільшений план view of the FRL300R in operation, showing the emitted red laser beam.

5.2 Регулювання швидкості обертання та кута сканування

The FRL300R offers variable rotation speeds (0-300-600rpm) and scanning angle options (0°-10°-45°-90°-180°-0°). Use the controls on the unit or the remote control to adjust these settings according to your application needs.

Figure 6: The remote control allows for convenient adjustment of laser settings.

5.3 Vibrate Mode

For use in windy or vibrating conditions, activate the vibrate mode. In this mode, the self-leveling function is deactivated, and the laser cross is locked, allowing the device to be used at any angle without constant re-leveling due to minor disturbances.

5.4 Використання приймача

The included laser receiver extends the working range and improves visibility in bright conditions. It can be used in a handheld position or mounted on a rod using the provided clamp. The receiver is IP55 waterproof and dustproof, ensuring reliable performance in various environments.

Figure 7: The FRL300R in use with its receiver and a measuring rod on a construction site.

Figure 8: The FRL300R positioned on a tripod, demonstrating its use for long-range leveling tasks.

6. Технічне обслуговування

Proper maintenance ensures the longevity and accuracy of your Firecore FRL300R Rotary Laser Level.

6.1 Очищення

Протріть пристрій м'якою гумкою, damp cloth. Do not use harsh chemicals or abrasive cleaners. Keep the laser output window clean to ensure optimal beam clarity.

6.2 Зберігання

When not in use, store the FRL300R and its accessories in the provided hard carrying case. Store in a dry place, away from direct sunlight and extreme temperatures.

6.3 Довговічність та захист

The FRL300R is designed to be tough and impact-resistant, with an IP55 rating for water and dust resistance. It can withstand drops from a height of 1m (3.3 ft.) onto concrete surfaces. While rugged, always handle the device with care to maintain its precision.

7. Вирішення проблем

If you encounter issues with your FRL300R, refer to the following common problems and solutions:

8. Технічні характеристики

9. Гарантія та підтримка

9.1 Інформація про гарантію

Firecore laser levels are covered by a ONE-YEAR warranty з дати покупки. Ця гарантія поширюється на дефекти матеріалів і виготовлення за нормального використання.

9.2 Підтримка клієнтів

For any product questions, technical assistance, or warranty claims, please do not hesitate to contact Firecore customer support. We are committed to responding to your inquiry within 24 hours.

Please refer to the contact information provided in your purchase documentation or visit the official Firecore webдеталі підтримки.