Пуч 21112H

Puig 21112H City Touring Scooter Windscreen Instruction Manual

Модель: 21112H | Бренд: Puig

1. Продукт закінчивсяview

The Puig City Touring windscreen is designed to provide enhanced protection against wind, pollution, and adverse weather conditions for scooter riders. It is suitable for both urban commutes and longer journeys. Constructed from durable 3mm polycarbonate, this windscreen offers a balance of strength and lightness, contributing to riding stability and safety. The smoked finish provides a sophisticated look while maintaining clear visibility.

This windscreen is TÜV approved and ABE licensed, ensuring compliance with high safety and quality standards for public road use. Its aerodynamic design and rounded profile are engineered to optimize protection without negatively impacting vehicle maneuverability.

Puig City Touring Windscreen installed on a red Honda scooter

Image 1.1: Puig City Touring Windscreen installed on a red Honda scooter, showing its integration and appearance.

2. Налаштування та встановлення

The Puig City Touring windscreen includes specific brackets for straightforward and secure mounting on compatible scooters. For models not explicitly listed, a universal version with a complete fitting kit is available, offering the same quality and adaptability.

2.1. Сумісні моделі

  • HONDA SCOOPY SH350i: 2021, 2022, 2023
  • HONDA SH 125i 4T E5: 2021, 2022, 2023, 2024, 2025
  • HONDA SH 150i 4T E5: 2021, 2022, 2023, 2024, 2025
  • HONDA SH 350i E5: 2021, 2022, 2023, 2024

2.2. Вміст упаковки

Перед початком встановлення переконайтеся, що всі компоненти присутні:

  • Puig City Touring Windscreen (Smoked)
  • Specific mounting brackets
  • Fasteners and hardware kit
Puig City Touring Windscreen and mounting hardware components laid out

Image 2.1: All components included with the Puig City Touring Windscreen, including the smoked screen and various mounting hardware pieces.

2.3. Процедура встановлення

  1. Приготування: Park the scooter on a stable, level surface. Ensure the engine is off and cool.
  2. Видалити наявні компоненти (якщо застосовується): If an old windscreen or fairing needs to be removed, carefully follow your scooter's service manual for removal instructions.
  3. Прикріпіть кронштейни: Secure the specific mounting brackets to the scooter's handlebars or designated mounting points using the provided fasteners. Refer to the detailed diagram in the physical instruction sheet for precise placement.
  4. Mount Windscreen: Align the Puig City Touring windscreen with the attached brackets. Use the remaining fasteners to secure the windscreen to the brackets. Do not overtighten initially.
  5. Налаштувати позицію: Gently adjust the windscreen's position to ensure proper alignment and clearance.
  6. Затягніть кріплення: Once satisfied with the position, progressively tighten all fasteners. Ensure they are snug but avoid excessive force to prevent damage to the polycarbonate or mounting points.
  7. Остаточна перевірка: Verify that the windscreen is securely mounted and does not obstruct steering, controls, or visibility.

Note: For detailed, model-specific installation steps, always refer to the physical instruction manual provided with your product. Professional installation is recommended if you are unsure about any steps.

3. Експлуатація та використання

The Puig City Touring windscreen is designed to enhance your riding experience by providing improved aerodynamic protection. Once installed, it functions passively to deflect wind, rain, and road debris, contributing to rider comfort and safety.

3.1. Benefits During Use

  • Захист від вітру: Reduces wind blast on the rider's chest and head, decreasing fatigue on longer rides.
  • Захист від погодних умов: Offers a barrier against rain and cold, improving comfort in adverse weather.
  • Щит від сміття: Protects the rider from small road debris and insects.
  • Aerodynamic Stability: The design helps maintain vehicle stability by managing airflow effectively.
сторона view of a scooter with the Puig City Touring Windscreen installed, highlighting its protective profile

Image 3.1: A scooter equipped with the Puig City Touring Windscreen, demonstrating its protective coverage from a side perspective.

4. Технічне обслуговування

Proper maintenance will ensure the longevity and clarity of your Puig City Touring windscreen.

4.1. Інструкції з очищення

  1. Полоскання: Gently rinse the windscreen with lukewarm water to remove loose dirt and dust. Avoid using high-pressure washers directly on the screen.
  2. мити: Use a soft cloth or sponge and a mild soap solution (e.g., dish soap diluted in water). Gently wipe the surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate.
  3. Ретельно промийте: Rinse again with clean water to remove all soap residue.
  4. Сухий: Dry the windscreen with a clean, soft microfiber cloth to prevent water spots. Do not wipe a dry, dirty screen, as this can cause scratches.

4.2. Огляд

Regularly inspect the windscreen and its mounting hardware for any signs of damage, cracks, or loose fasteners. Tighten any loose bolts as necessary. Replace the windscreen if it becomes severely scratched or damaged, as this can impair visibility and safety.

5. Вирішення проблем

This section addresses common issues you might encounter with your windscreen.

проблемаМожлива причинаРішення
Windscreen vibrates or rattlesОслаблені кріплення.Check and tighten all mounting bolts and screws. Ensure all components are properly seated.
Знижена видимість через подряпиниImproper cleaning methods or impact damage.Minor scratches may be polished with specialized polycarbonate polish. For severe scratches, replacement of the windscreen is recommended. Always use soft cloths and mild soap for cleaning.
Windscreen does not fit correctlyIncorrect model purchased or improper installation.Verify that the windscreen model (21112H) is compatible with your scooter model and year. Re-check installation steps, ensuring brackets are correctly positioned. Contact Puig support if issues persist.

6. Технічні характеристики продукту

  • Бренд: Puig
  • модель: Тури по місту
  • Номер моделі товару: 21112H
  • Номер деталі виробника: 21112H
  • Виробник: Motoplastic, S.A.
  • матеріал: 3mm High-Resistance Polycarbonate
  • Колір / обробка: Копчений
  • Посада: Верхній фронт
  • Вага товару: 1.57 кілограма
  • Розміри упаковки: 57.8 х 45.7 х 12.1 см
  • Тип автомобільної посадки: Пристосування до автомобіля
  • Сертифікати: TÜV approved, ABE licensed
Детальна сторона view of the Puig City Touring Windscreen, showcasinйого аеродинамічні перевагиfile and smoked finish

Зображення 6.1: Бічний професіоналfile of the Puig City Touring Windscreen, illustrating its design and material thickness.

7. Гарантія та підтримка

Information regarding warranty coverage for Puig products is typically provided with the purchase documentation or can be found on the official Puig website. For specific warranty details, please refer to the terms and conditions provided at the time of purchase.

7.1. Підтримка клієнтів

For technical assistance, installation queries, or any other support needs, please contact Puig customer service through their official website or authorized dealers. When contacting support, please have your product model number (21112H) and purchase details readily available.

You can visit the official Puig store for more information: Puig Store on Amazon.fr

Пов'язані документи - 21112H

попередньоview Інструкція з монтажу лобового скла Puig V-Tech Touring для Yamaha NMAX 125 (2021-)
Детальна інструкція з монтажу вітрового скла Puig V-Tech Touring на Yamaha NMAX 125 (модельний рік 2021 і новіші). Містить список деталей та покрокове керівництво зі складання.
попередньоview Інструкція з монтажу лобового скла Puig GTS Touring для Piaggio Vespa GTS 125/300 '07-
Вичерпні інструкції з монтажу та перелік деталей для лобового скла Puig GTS Touring, спеціально розробленого для моделей Piaggio Vespa GTS 125 та GTS 300, починаючи з 2007 року. У цьому посібнику детально описано розбирання, складання кронштейна, кріплення лобового скла та остаточні кроки затягування, включаючи необхідні кріплення та характеристики крутного моменту.
попередньоview Інструкція з монтажу лобового скла Puig GTS Touring для Piaggio Vespa GTS 125/300 '07-
Детальна інструкція з монтажу лобового скла Puig GTS Touring, розробленого для моделей Piaggio Vespa GTS 125/300, починаючи з 2007 року. Містить перелік деталей, описи та кроки складання.
попередньоview Інструкція з монтажу лобового скла Puig Touring для BMW G310GS '17-
Офіційні інструкції з монтажу та перелік деталей для захисного склом Puig Touring, розробленого для мотоцикла BMW G310GS (2017 року випуску). Містить покрокове керівництво по збірці.
попередньоview Puig Touring Screen Mounting Instructions for BMW F900GS '24- (REF 21980)
Detailed mounting instructions and parts list for the Puig Touring Screen (REF 21980) designed for the BMW F900GS '24- model. Includes assembly steps and component references.
попередньоview Інструкція з монтажу напівобтічника Puig Batwing SML для Triumph Bonneville Speedmaster '18-
Детальні інструкції з монтажу та перелік деталей для моделі напівобтічника Puig Batwing SML Touring (REF 21117) для Triumph Bonneville Speedmaster 2018 року. Містить покрокові схеми та характеристики крутного моменту.