Посібник користувача HEADRUSH Core та FRFR112 MK2

вступ

This manual provides comprehensive instructions for the HEADRUSH Core Guitar and Vocal Multi Core Effects Amp Modeling Processor and the HEADRUSH FRFR112 MK2 12-inch 2500W Electric and Bass Guitar Amp. This powerful combination offers guitarists, vocalists, and bassists a versatile and portable solution for effects processing and amplification. The HeadRush Core features realistic amp, cab, mic, and effect models, smart cloning technology, a vocal effects suite with Antares Auto-Tune, a built-in looper, and wireless connectivity. The FRFR112 MK2 speaker delivers 2500 watts of clear, neutral amplification, preserving your tone with its full-range 12" woofer and 1" tweeter.

Image: The HeadRush Core multi-effects processor shown alongside the HeadRush FRFR112 MK2 powered speaker, illustrating the complete system.

Налаштування

1. Розпакування та перевірка

Carefully unpack all components. Inspect the HeadRush Core and FRFR112 MK2 for any signs of damage during transit. Retain all packaging materials for future transport or storage.

2. Підключення живлення

• Connect the supplied power cable to the power input on the rear of the HeadRush Core.
• Connect the supplied power cable to the power input on the rear of the FRFR112 MK2.
• Plug both power cables into a grounded electrical outlet. Ensure the power switch on both units is in the OFF position before connecting to power.

3. Звукові підключення

• Guitar/Instrument Input: Connect your guitar or instrument to the 1/4" TS input on the HeadRush Core.
• Вхід мікрофона: For vocal processing, connect your microphone to the Combo XLR + 1/4" input. Ensure phantom power is enabled if using a condenser microphone.
• Output to FRFR112 MK2: Connect the Stereo XLR or 1/4" outputs from the HeadRush Core to the inputs of the FRFR112 MK2. For stereo operation, use both left and right outputs.
• Навушники: Connect headphones to the 1/8" headphones output for silent practice.
• Петля ефектів: Utilize the 1/4" stereo FX loop for integrating external pedals or effects units.

Зображення: Крупний план view of the HeadRush Core's rear panel, highlighting the various input and output connections for instruments, microphones, and external devices.

4. Початкове увімкнення

Once all connections are secure, power on the FRFR112 MK2 first, then the HeadRush Core. This sequence helps prevent sudden pops or surges.

Інструкція з експлуатації

1. Навігація по сенсорному інтерфейсу

The HeadRush Core features a 7-inch high-resolution touchscreen for intuitive control. Tap, swipe, and drag elements to adjust settings, select rigs, and manage effects. The interface is designed for quick and easy editing.

Image: A user's hands interacting with the HeadRush Core's touchscreen, which shows the looper function with various controls and a waveform display.

2. Amp Modeling and Effects

• Selecting Rigs: Browse and select from a vast library of pre-loaded rigs, which combine amps, cabinets, and effects.
• Customizing Effects: Tap on individual effect blocks on the screen to adjust parameters. Drag and drop blocks to reorder them within your signal chain.
• Smart Cloning: Use the smart cloning feature to capture the unique sound and response of your favorite analog gear.

Зображення: Оверview of the HeadRush Core's key features, including its multi-core processor, extensive amp and effects library, Antares Auto-Tune integration, smart cloning capabilities, and wireless connectivity.

3. Vocal FX Suite

The HeadRush Core includes a comprehensive vocal effects suite. Access effects such as Antares Auto-Tune, automatic harmonies, reverb, delay, distortion, compression, EQ, and de-esser. Adjust vocal parameters directly on the touchscreen.

Зображення: Детальний view of the HeadRush Core's touchscreen displaying the Antares Auto-Tune interface, allowing users to adjust key, scale, voice type, and other tuning parameters.

4. Функціональність лупера

The built-in looper allows for layering sounds and capturing musical ideas. Loops can be saved as .WAV files and exported for later use. MIDI sync capabilities ensure precise timing with other devices.

5. Аудіо Bluetooth

Connect your mobile device via Bluetooth to stream audio for practice or play-along. This feature allows you to play along with backing tracks or songs directly through the FRFR112 MK2.

Image: The HeadRush Core and FRFR112 MK2 set up with a bass guitar and electric guitar, demonstrating Bluetooth connectivity to a tablet for audio streaming.

6. FRFR112 MK2 Operation

• Регулювання гучності: Adjust the master volume on the FRFR112 MK2 to suit your environment.
• Розміщення: The FRFR112 MK2 can be used as a wedge monitor, pole-mounted, or in an upright position for optimal sound projection.

Image: A close-up of the HeadRush FRFR112 MK2 speaker, highlighting its precision-tuned design for accurate sound delivery of amp and cabinet emulations.

Image: The HeadRush Core and two FRFR112 MK2 speakers set up on a stage, illustrating the powerful 2500-watt output and clear sound for live performance.

Image: A person easily carrying the HeadRush FRFR112 MK2 speaker by its handle, highlighting its lightweight design (34.7 lbs) for easy transport.

Технічне обслуговування

• Прибирання: Use a soft, dry cloth to clean the exterior surfaces of both units. Avoid abrasive cleaners or solvents.
• Зберігання: When not in use for extended periods, store the units in a cool, dry place, ideally in their original packaging or a protective case.
• Оновлення прошивки: Periodically check the HEADRUSH webсайт для оновлень прошивки, щоб забезпечити оптимальну продуктивність і доступ до нових функцій.

Усунення несправностей

Немає виходу звуку

• Ensure all power cables are securely connected and both units are powered on.
• Check all audio cables (instrument, microphone, and output to speaker) for proper connection and integrity.
• Verify that the volume levels on both the HeadRush Core and FRFR112 MK2 are turned up.
• Confirm that the correct input is selected on the HeadRush Core.
• If using headphones, ensure they are fully plugged in and the headphone volume is adjusted.

Distorted or Unwanted Sound

• Check input gain levels on the HeadRush Core to prevent clipping.
• Review the effects chain on the HeadRush Core for any effects that might be causing unwanted distortion.
• Ensure the FRFR112 MK2's volume is not excessively high, leading to speaker distortion.

Проблеми з підключенням (Wi-Fi/Bluetooth)

• Ensure Wi-Fi and Bluetooth are enabled on the HeadRush Core and your external device.
• Move closer to your Wi-Fi router or Bluetooth device to improve signal strength.
• Restart both the HeadRush Core and the external device.

Технічні характеристики

Гарантія та підтримка

HEADRUSH products are designed for reliability and performance. For detailed warranty information, please refer to the warranty card included with your product or visit the official HEADRUSH website. For technical support, product registration, or service inquiries, please contact HEADRUSH customer support through their official channels. Online resources, including FAQs and additional documentation, may also be available on the HEADRUSH webсайт.

Щоб отримати найновішу інформацію та підтримку, відвідайте: www.headrushfx.com