Fieldpiece SM482V

Fieldpiece SM482V Wireless 4-Port SMAN Refrigerant Manifold with Vacuum Gauge

Інструкція з експлуатації

Model: SM482V | Brand: Fieldpiece

Продукт закінченийview

The Fieldpiece SM482V is an advanced wireless 4-port SMAN refrigerant manifold designed for comprehensive HVAC and Refrigeration diagnostics and service. This digital manifold accurately measures low and high pressure, and calculates superheat and subcooling. It features protected thermocouple jacks for temperature measurements and integrates with Job Link Psychrometer probes for enhanced functionality. The device is built for durability with a heavy-duty casing and IP55 dust and water resistance.

Fieldpiece SM482V Digital Manifold Front View

Малюнок 1: Спереду view of the Fieldpiece SM482V Wireless 4-Port SMAN Refrigerant Manifold, showing the digital display and valve controls.

Ключові характеристики

Налаштування та перше використання

  1. Установка батареї: Open the battery compartment on the rear of the unit. Insert 6 AA batteries, ensuring correct polarity. Close the compartment securely.
  2. Увімкнення: Press the power button to turn on the manifold. The display will illuminate and show initial readings.
  3. Refrigerant Selection: Use the "SELECT" button to cycle through the pre-loaded refrigerants. Choose the appropriate refrigerant for your application.
  4. Zero Pressure: Before connecting to a system, ensure all valves are closed and press the "ZERO PRESSURE" button to calibrate the pressure sensors.
  5. Підключення зондів: Connect thermocouple pipe clamps to the protected jacks for temperature measurements. For wireless integration, ensure Job Link Psychrometer probes are paired according to their respective manuals.
Fieldpiece SM482V with hands connecting hoses

Figure 2: The SM482V manifold being connected to an HVAC system, demonstrating hose attachment points.

Інструкція з експлуатації

Pressure and Temperature Measurement

Connect the manifold hoses to the high and low-pressure ports of the HVAC/R system. Open the appropriate valves on the manifold to read system pressures. The display will show real-time pressure readings, along with superheat and subcooling calculations based on connected temperature probes.

Vacuum Measurement

To measure vacuum, connect the vacuum pump to the manifold's vacuum port. Open the vacuum valve and start the pump. The integrated micron gauge will display the vacuum level. Monitor the reading until the desired vacuum is achieved.

System Tightness Test (Nitrogen Pressure Test)

The SM482V features a temperature-compensated nitrogen pressure test. Connect a nitrogen tank to the system via the manifold. Press the "N2 TEST" button to initiate the test. The manifold will record the initial pressure and monitor for pressure differential (Pdif) over time, indicating potential leaks. Press "STOP/EXIT" to end the test.

Реєстрація даних

The manifold can log up to 168 hours of data. To start data logging, refer to the specific instructions in the full user manual or the Job Link System App. Logged data can be retrieved and analyzed via the Job Link App.

Fieldpiece SM482V in use on an outdoor HVAC unit

Figure 3: An HVAC technician using the Fieldpiece SM482V on an outdoor air conditioning unit.

Технічне обслуговування

Fieldpiece SM482V with included soft case

Figure 4: The Fieldpiece SM482V manifold alongside its protective soft case.

Усунення несправностей

проблемаМожлива причинаРішення
Неточні показники тискуUncalibrated sensors, leaky hoses/gaskets, incorrect refrigerant selected.Perform "ZERO PRESSURE" calibration. Inspect and replace worn hoses or gaskets. Verify correct refrigerant is selected.
Vacuum Reading FluctuationsMoisture in system, internal manifold leak, contaminated hoses.Ensure system is thoroughly evacuated. Check manifold for internal leaks (refer to service manual). Purge hoses with nitrogen before vacuuming.
Дисплей не вмикаєтьсяРозряджені батарейки, неправильне встановлення батарейок.Replace batteries with new ones. Check battery polarity.
Проблеми з бездротовим підключеннямOut of range, interference, un-paired probes.Ensure manifold and probes are within range (up to 1000ft line of sight). Reduce interference sources. Re-pair probes according to their instructions.

Технічні характеристики

ОсобливістьДеталь
МодельSM482V
Вага товару5.79 фунта (2.63 кг)
Розміри продукту (Д x Ш x В)5 x 10.25 x 11.25 дюйми (12.7 x 26.0 x 28.6 см)
матеріалABS пластик
Джерело живлення6 батарейки АА
Термін служби батареї405 hours (with backlight and wireless OFF)
Дисплей5" (12.7 cm) LCD w/ backlight
Дальність бездротового зв'язку1000' (305 m) line of sight
Maximum Manifold Pressure870 psig (6000 кПа)
Вакуумний порт3/8" for fast evacuations
Refrigerant Recovery/Charging Port1/4 дюйма
Suction Line and Liquid Line Ports1/4 дюйма
Клас захисту від проникненняIP55 (Dust/Water Resistance)
Операційне середовище14° to 122° F (-10° to 50° C) at <75% RH
Середовище зберігання-4° to 140° F (-20° to 60° C) at <80% RH (w/o batteries)
Порт данихUSB-C for extracting data logs and updating firmware
Fieldpiece SM482V Specifications Comparison Table

Figure 5: Detailed specifications table comparing SM382V and SM482V models.

Інформація про гарантію

The Fieldpiece SM482V Wireless 4-Port SMAN Refrigerant Manifold comes with a 1 рік обмеженої гарантії from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms, conditions, and limitations, please refer to the official warranty document included with your product or visit the Fieldpiece official webсайт.

Примітка: The warranty does not cover damage caused by misuse, accident, unauthorized modification, neglect, or improper operation.

Підтримка та контактна інформація

For technical assistance, product inquiries, or warranty claims, please contact Fieldpiece customer support through the following channels:

When contacting support, please have your product model number (SM482V) and purchase date available.

Пов'язані документи - SM482V

попередньоview Інструкція з експлуатації колектора холодоагенту Fieldpiece SMAN®
Інструкція з експлуатації холодильного колектора Fieldpiece SMAN® із вбудованим вакуумметром (моделі SM382V та SM482V), у якій детально описано функції, експлуатацію, технічні характеристики та технічне обслуговування для фахівців з опалення, вентиляції та кондиціонування повітря (HVACR).
попередньоview Колектор холодоагенту Fieldpiece SMAN® з вбудованим вакуумметром. Інструкція з експлуатації
Operator's manual for the Fieldpiece SMAN® Refrigerant Manifold with Built-in Vacuum Gauge (Models SM382V and SM482V). This guide provides HVACR professionals with detailed instructions on features, operation, maintenance, and safety for accurate refrigerant management and system diagnostics.
попередньоview Інструкція з експлуатації колектора холодоагенту Fieldpiece SMAN
Вичерпний посібник оператора для холодильних колекторів Fieldpiece SMAN (моделі SM382V та SM482V) із вбудованими вакуумметрами. Охоплює функції, експлуатацію, технічне обслуговування, технічні характеристики, безпеку та усунення несправностей для фахівців з опалення, вентиляції та кондиціонування повітря (HVACR).
попередньоview Fieldpiece SMAN® Coletor de Refrigerante com Vacuómetro Incorporado - Manual do Operador
Посібник оператора з деталями для котлів холодильного агента Fieldpiece SMAN® з вбудованим вакуумметром (моделі SM382VINT і SM482VINT). Abrange operação, gurança, manutenção e specificações para profissionais de HVACR.
попередньоview Manuel d'utilisation des manifolds pour fluide frigorigène Fieldpiece SMAN® avec jauge à vide intégrée
Повне керівництво по використанню для колекторів для холодильної рідини Fieldpiece SMAN®, моделі SM382VINT (3 порти) і SM482VINT (4 порти). Ce document couvre les caractéristiques, le fonctionnement, les procédures de sécurité, l'entretien, les specifications techniques et le dépann#age.
попередньоview Посібник користувача Fieldpiece SM480V Колектор холодоагенту SMAN + мікронний манометр
Comprehensive operator's manual for the Fieldpiece SM480V SMAN Refrigerant Manifold and Micron Gauge, detailing features, operation, maintenance, specifications, and compliance for HVACR professionals. Covers setup, measurements, calculations, menu functions, and troubleshooting.