1. Продукт закінчивсяview
The TOA Electronics VX-3004F AMQ is a voice alarm system frame designed for use with TOA's VX-3000 Series rack-mount type voice evacuation systems. This unit complies with the European Standard EN54-16 for fire alarm systems, providing control for voice evacuation announcements and status indications.
It supports up to 4 amplifiers, configurable as 1 zone with 1 amplifier, 4 AB-zones, or 3 AB zones with a standby amplifier. The front panel features various indicators for amplifier status, fault conditions, and system operation, along with control buttons for acknowledgment, reset, and lamp тестування.
2. Розташування передньої панелі
малюнок 1: Front Panel of the VX-3004F AMQ Voice Alarm System Frame.
The front panel of the VX-3004F AMQ provides visual feedback on the system's operational status and allows for basic control. Key areas include:
- TOA Logo: Brand identification on the upper left.
- Amplifier Status Indicators: Located on the lower left, these LEDs show the status for up to four amplifiers (1, 2, 3, 4/SBY). Each amplifier has indicators for ПІК (overload), СИГНАЛ (audio presence), ДІЯТИ (active), and ПОТУЖНІСТЬ (увімкнено).
- Fault Status Indicators: Positioned in the center, these LEDs indicate various system faults. They are categorized by ЗОНА (A and B, with indicators for 1, 2, 3, 4) and ЗАГАЛЬНІ faults (ЗАПОБІЖНИК, ПОТУЖНІСТЬ, ЦП, ОДИНИЦЯ, МЕРЕЖА, EMG MIC).
- Кнопки управління: Three buttons are located to the right of the fault status indicators: ACK (Acknowledge), СКИДАННЯ, і LAMP ТЕСТ.
- Індикатори стану системи: On the upper right, these LEDs show overall system status: ПОТУЖНІСТЬ (main power), БІГАТИ (system operating), АВАРІЯ (emergency mode active), and CPU OFF (CPU not running).
- Network/Link Indicators: Below the system status, LEDs for LAN A, LAN B, RS LINK A, і RS LINK B indicate network and communication link activity.
- Номер моделі: "VOICE EVACUATION FRAME VX-3004F" is printed on the lower right.
3. Встановлення та налаштування
3.1. Розпакування та перевірка
Carefully unpack the VX-3004F AMQ frame and inspect it for any signs of damage during transit. Ensure all components listed in the packing materials are present. If any damage or missing parts are found, contact your supplier immediately.
3.2. Монтаж
The VX-3004F AMQ is designed for rack-mount installation. Secure the unit into a standard 19-inch equipment rack using appropriate mounting hardware. Ensure adequate ventilation around the unit to prevent overheating.
3.3. Підключення живлення
Connect the unit to a 20 - 33 V DC power source using the removable 4-pin terminal block. Ensure correct polarity and a stable power supply. The power consumption is 24 W for the frame only, and up to 90 W when RS Link is outputting 2A.
3.4. Network and Link Connections
- LAN A, B: Connect standard 100BASE-TX network cables to the RJ45 connectors for network communication.
- RS Link A, B: Use shielded Category 5 twisted pair (CAT5-STP) or greater cables for RS Link connections. These provide power feed up to 1A per connector.
- DS Link: Connect to DS LINK of power supply units using shielded Category 5 twisted pair (CAT5-STP) cables.
- Analog Link: Connect to other VX-3004F, VX-3008F, or VX-3016F units via the RJ45 connectors for analog input/output.
4. Операція
4.1. Увімкнення
Once all connections are secure, apply power to the unit. The ПОТУЖНІСТЬ indicator on the front panel should illuminate. After a brief initialization period, the БІГАТИ indicator will light up, signifying normal operation.
4.2. Amplifier Status Monitoring
Контролювати amplifier status indicators for each of the four ampканали ліфіера:
- ПІК: Світиться, коли amplifier output level is too high, indicating potential distortion.
- СИГНАЛ: Illuminates when an audio signal is present at the ampвхід підсилювача.
- ДІЯТЬ: Світиться, коли amplifier is active and functioning.
- ПОТУЖНІСТЬ: Світиться, коли amplifier module has power.
4.3. Fault Status Monitoring
The СТАН НЕСПРАВНОСТІ section provides critical information regarding system health. If any fault indicator illuminates, refer to the Troubleshooting section.
- ZONE A/B (1-4): Indicates a fault within a specific speaker zone (A or B) for channels 1 through 4.
- Запобіжник: Indicates a blown fuse within the unit.
- ПОТУЖНІСТЬ: Indicates a power supply issue.
- ЦП: Indicates a central processing unit malfunction.
- ОДИНИЦЯ: Indicates a general unit fault.
- МЕРЕЖА: Indicates a network communication error.
- EMG MIC: Indicates a fault with the emergency microphone.
4.4. Кнопки керування
- ACK (Acknowledge): Press to acknowledge a fault condition, which may silence an audible alarm or clear a flashing indicator.
- СКИДАТИ: Press to reset the system after a fault has been resolved.
- LAMP ТЕСТ: Press and hold to illuminate all LED indicators on the front panel, verifying their functionality.
5. Технічне обслуговування
5.1. прибирання
Regularly clean the exterior of the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive materials. Ensure ventilation openings are free from dust and obstructions.
5.2. Екологічні умови
Ensure the unit is operated within its specified temperature and humidity ranges. Avoid exposing the unit to direct sunlight, excessive heat, moisture, or corrosive environments.
5.3. Оновлення мікропрограми
Periodically check the TOA Electronics website for any available firmware updates for the VX-3004F AMQ. Follow the provided instructions carefully for any update procedures.
6. Вирішення проблем
This section provides guidance for common issues indicated by the front panel fault status LEDs.
| Індикатор | Можлива причина | Дія |
|---|---|---|
| ПОТУЖНІСТЬ (System Status) Off | No DC power supply, power cable disconnected. | Check DC power source and cable connections. |
| БІГАТИ Вимкнено | System initialization failure, CPU error. | Check CPU fault indicator. Power cycle the unit. If issue persists, contact support. |
| ПІК (Amplifier) On | Amplifier input signal too high, output overload. | Reduce input signal level or check speaker line impedance. |
| ЗОНА А/В (Fault Status) On | Fault detected in the specified speaker zone (e.g., open circuit, short circuit). | Inspect speaker lines and connections for the indicated zone. |
| ЗАПОБІЖНИК (Fault Status) On | Перегорів внутрішній запобіжник. | Contact qualified service personnel for fuse replacement. Do not attempt to replace fuses yourself. |
| ПОТУЖНІСТЬ (Fault Status) On | Internal power supply malfunction. | Power cycle the unit. If the fault persists, contact support. |
| ЦП (Fault Status) On | Central Processing Unit error. | Power cycle the unit. If the fault persists, contact support. |
| МЕРЕЖА (Fault Status) On | Network communication error. | Check LAN cable connections and network configuration. |
| EMG MIC (Fault Status) On | Emergency microphone fault. | Check emergency microphone connection and functionality. |
After resolving a fault, press the ACK button to acknowledge the fault and then the СКИДАННЯ button to clear the fault condition and restore normal operation.
7. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Модель | VX-3004F AMQ |
| Джерело живлення | 20 - 33 V DC, removable terminal block (4 pins) |
| Споживана потужність | 24 W (frame only) at 33V DC input, 90 W (RS Link: 2 A output) at 33 V DC input |
| LAN A, B | 2 Connectors, 100BASE-TX, TCP, UDP, ARP, ICMP, RTP, IGMP, FTP, HTTP, NTP, RSTP, PCM (48 kHz, 16 bits) |
| RS Link A, B | 2 Connectors, Max. 1 A power feed per connector, RJ45, Shielded Category 5 twisted pair cable (CAT5-STP) or greater |
| DS Link | RJ45, Shielded Category 5 twisted pair cable (CAT5-STP) |
| Analog Link | 1 input, 1 output, RJ45 (for VX-3004F, VX-3008F, VX-3016F) |
| Закінчити | Panel: Surface-treated steel plate, black, 30 percent gloss, paint |
| Розміри (Д x Ш x В) | 13.58 x 19.02 x 5.22 дюйми (34.5 x 48.3 x 13.25 см) |
| вага | 16.76 фунти (7.6 кг) |
| Відповідність | EN54-16 |
8. Гарантія та підтримка
8.1. Інформація про гарантію
For detailed warranty information regarding your TOA Electronics VX-3004F AMQ, please refer to the warranty card included with your product or contact your authorized TOA Electronics dealer or distributor. Warranty terms and conditions may vary by region and purchase location.
8.2. Технічна підтримка
Should you encounter any issues not covered in this manual or require further technical assistance, please contact your local TOA Electronics technical support or authorized service center. Ensure you have your product model number (VX-3004F AMQ) and serial number available when seeking support.
