вступ
This manual provides comprehensive instructions for the installation, operation, and maintenance of your OONO DIN Rail Mount 16 LEDs Indicator Light Module. This module is designed for industrial and electrical applications, offering clear visual indication with 16 independent LED channels. Please read this manual thoroughly before use to ensure proper and safe operation.
Інформація про безпеку
- Always disconnect power before installing, wiring, or performing maintenance on the module.
- Переконайтеся, що вся проводка відповідає місцевим та національним електротехнічним нормам.
- This module operates with DC voltage. Verify correct polarity before applying power.
- Do not exceed the specified operating voltage діапазон від 5 до 50 В постійного струму.
- Уникайте впливу надмірної вологи, пилу або екстремальних температур на модуль.
- Монтаж та підключення повинен виконуватися лише кваліфікованим персоналом.
Продукт закінченийview
The OONO D-1003T Series is a 16-channel LED indicator light module featuring 5mm blue LEDs. It supports both Common Positive and Common Negative control modes, making it versatile for various circuit designs. The module is equipped with 5.0mm pitch screw terminal blocks for secure wire connections and comes with a high-quality fireproof nylon DIN rail mount carrier.
Ключові характеристики:
- 16 independent LED indicator channels.
- Широкий робочий об'ємtage range: 5VDC to 50VDC.
- Supports Common Positive and Common Negative control.
- Robust 5.0mm pitch screw terminal blocks.
- DIN rail mountable (35mm, 32mm, 15mm compatible) with detachable carrier for panel mounting.
- FR-4 fiber glass PCB for durability.
Компоненти:
- 16 x 5mm Blue LEDs
- Input Terminal Blocks (Channels 1-8, 9-16, COM)
- DIN Rail Mount Carrier
- FR-4 PCB
Рисунок 1: Зверху вниз view of the 16-LED indicator module, showing the LED array and terminal blocks.
Figure 2: Angled perspective of the module, highlighting its compact design and integrated DIN rail mounting mechanism.
Технічні характеристики
| Параметр | Значення |
|---|---|
| Номер моделі | D-1003T Series |
| Кількість каналів | 16 |
| Колір світлодіода | Синій |
| LED Diameter | 5 мм |
| Робочий випtage | 5 В постійного струму ~ 50 В постійного струму |
| Drive Current (per LED) | 0.3mA (at 5VDC), 1.0mA (at 12VDC), 2.2mA (at 24VDC), 4.6mA (at 48VDC) |
| Terminal Block Pitch | 5.0 мм / 0.197 дюйма |
| Діапазон проводів | 26 to 12AWG / 2.5mm² |
| Довжина смуги | 7 мм / 0.28 дюйма |
| Тип монтажу | DIN Rail Mount (35mm/32mm/15mm), Panel Mount (carrier detachable) |
| матеріал | Fireproof Nylon (carrier), FR-4 (PCB) |
| Розміри продукту | 3.42 x 2.44 x 1.58 дюйма (87 x 62 x 40.2 мм) |
| Вага товару | 4.3 унцій (122 грам) |
Figure 3: Detailed dimensional drawing of the module, showing key measurements in millimeters.
Налаштування та встановлення
Що в коробці:
- 1 x DIN rail mount indicator light module
Монтаж модуля:
The module is designed for easy installation on standard DIN rails (35mm, 32mm, or 15mm). The carrier can also be detached for panel mounting applications.
- Монтаж на DIN-рейку: Align the module's clips with the DIN rail. Press down firmly until the module snaps securely onto the rail. Ensure it is seated properly and does not wobble.
- Монтаж панелі: The DIN rail carrier can be disassembled from the main PCB. Once detached, the PCB can be mounted directly to a panel using appropriate standoffs or screws (not included).
Figure 4: The indicator module securely mounted on a standard DIN rail, ready for wiring.
Інструкції з підключення:
The module features 5.0mm pitch screw terminal blocks for connecting input signals. Each LED channel (1-16) has a dedicated input terminal, and there is a common (COM) terminal.
- Підготуйте дроти: Strip approximately 7mm (0.28 inches) of insulation from the ends of your wires (26 to 12AWG / 2.5mm²).
- Підключення входів: Loosen the screws on the desired terminal blocks. Insert the stripped wire ends fully into the terminal openings. Tighten the screws to secure the wires. Gently tug on the wires to ensure a firm connection.
- Common Connection: Connect the common return path of your control circuit to the "COM" terminal.
Малюнок 5: Збільшений план view of the screw terminal blocks, indicating channel numbers and the common terminal.
Режими роботи
The OONO D-1003T Series supports both Common Positive and Common Negative control configurations. This flexibility allows integration into various existing control systems.
Common Positive Control:
In this mode, the "COM" terminal is connected to the positive supply voltage. Each individual channel terminal (1-16) is then connected to the negative side of the control signal. When a channel's input is pulled low (connected to ground or negative supply), the corresponding LED will illuminate.
- Connect the positive supply (e.g., +5VDC to +50VDC) to the COM термінал.
- Connect the negative side of your control signal for each channel (1-16) to its respective input terminal.
- LED illuminates when the input terminal is connected to the negative potential.
Common Negative Control:
In this mode, the "COM" terminal is connected to the negative supply voltage (ground). Each individual channel terminal (1-16) is then connected to the positive side of the control signal. When a channel's input is pulled high (connected to positive supply), the corresponding LED will illuminate.
- Connect the negative supply (e.g., Ground) to the COM термінал.
- Connect the positive side of your control signal for each channel (1-16) to its respective input terminal.
- LED illuminates when the input terminal is connected to the positive potential.
Figure 6: Internal circuit diagram illustrating the connection of LEDs and resistors to the input and common terminals.
Технічне обслуговування
The OONO DIN Rail Mount 16 LEDs Indicator Light Module is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.
- Прибирання: If necessary, gently wipe the module with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
- Перевірка підключення: Periodically inspect terminal block screw connections to ensure they remain tight and secure. Loose connections can lead to intermittent operation or damage.
- Умови навколишнього середовища: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature component degradation.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Жоден світлодіод не світиться. | No power supply to the common terminal, incorrect common connection, or no input signal. | Перевірте потужність джерела живленняtage is within 5-50VDC. Check common terminal wiring (COM). Ensure input signals are correctly applied to individual channels. |
| Specific LED(s) do not illuminate. | Faulty input signal to that channel, incorrect wiring for that channel, or damaged LED. | Check the input signal for the specific channel. Verify wiring for that channel is secure and correct. If all else fails, the LED may be damaged and require module replacement. |
| LEDs are dim or flicker. | Недостатня кількість обtage, loose connections, or excessive current draw from other components on the same supply. | Забезпечити постачання обtage is stable and within range. Check all terminal connections for tightness. Isolate the module to confirm power supply stability. |
| Module does not mount securely on DIN rail. | Incorrect DIN rail size or improper mounting technique. | Ensure you are using a 35mm, 32mm, or 15mm DIN rail. Press firmly until the clips engage. |
Гарантія та підтримка
For warranty information and technical support, please refer to the official OONO website or contact your authorized distributor. Keep your purchase receipt as proof of purchase for any warranty claims.
Виробник: CZH-LABS
Бренд: OONO
Для отримання додаткової допомоги ви можете відвідати Магазин OONO на Amazon.
