вступ
Дякуємо за покупкуasing the Mytrix M16 Leverless Arcade Controller. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly to ensure optimal performance and longevity of your controller.
Вміст упаковки
Перевірте, чи всі перелічені нижче предмети входять до вашої упаковки:
- Mytrix M16 Leverless Arcade Controller
- Кабель USB-C
- Знімач ключів
- Посібник користувача
- Extra Low Profile Red Switches (x2)
- Extra Keycaps (x2)
Image: Contents of the Mytrix M16 package, including the controller, USB-C cable, keycap puller, manual, two extra switches, and two extra keycaps.
Налаштування та сумісність
The Mytrix M16 controller offers wide compatibility across various platforms. Ensure your device is updated to the latest firmware for best performance.
Системні вимоги
- ПК: Windows 10 and above, Steam Deck, Raspberry Pi, MiSTer, Linux
- Консолі: PS3, PS4, Nintendo Switch
- Mobile/Other: Android, iPadOS, MacOS
- Примітка: For PlayStation 5 and Xbox consoles, an additional adapter is required (not included).
Image: Visual representation of the Mytrix M16 controller's compatibility with various platforms including PS5, PS4, PS3, PC, Switch, Steam, Arcade, and Xbox (with adapter).
Початкове підключення
- Connect the provided USB-C cable to the controller's USB-C port.
- Connect the other end of the USB-C cable to your desired gaming platform (PC, console, etc.).
- The controller should be automatically recognized by most compatible systems.
Інструкція з експлуатації
The Mytrix M16 features a GP-2040-CE chip for ultra-low latency and various control modes.
Режими керування
The controller supports multiple input modes:
- Режим X-введення
- Режим перемикання
- PS3/D-input mode
- Режим PS4
- Режим клавіатури
Button Layout and Key Values
Refer to the diagram and table below for the standard button layout and corresponding key values across different modes.
Image: Diagram showing the button layout of the Mytrix M16 controller and a table detailing key values for XInput, Switch, PS4/PS3, DInput, Arcade, and RP2040 modes.
Спеціальні функції
- Турбофункція: Activates rapid fire for selected buttons. Consult the web configuration for specific setup.
- SOCD Cleaning Modes: Supports various Simultaneous Opposite Cardinal Direction cleaning modes to prevent conflicting directional inputs. Configurable via web інтерфейс.
- M1/M2 Custom Buttons: Two customizable buttons for advanced control.
RGB освітлення
The controller features customizable RGB lighting with 4 preset modes.
Image: The Mytrix M16 controller displaying various RGB backlight colors, illustrating the 4 preset modes.
Custom RGB Lighting Controls
Adjust RGB lighting using the following button combinations:
- SELECT + START + X: Next Animation
- SELECT + START + Y: Previous Animation
- SELECT + START + A: Підвищення яскравості
- SELECT + START + B: Зменшення яскравості
- SELECT + START + RB: LED Parameter Up
- SELECT + START + RT: LED Parameter Down
- SELECT + START + LB: Pressed Parameter Up
- SELECT + START + LT: Pressed Parameter Down
Image: A visual guide to customizing RGB lighting on the Mytrix M16 controller, showing various color options and control combinations.
Maintenance and Customization
The Mytrix M16 is designed for easy maintenance and extensive customization.
Перемикачі з можливістю гарячої заміни
The controller uses Gateron Low Profile Red Switches, which are hot-swappable. This allows you to replace switches without soldering.
- Тип перемикача: Gateron Low Profile Червоні перемикачі
- Тривалість життя: 50 мільйонів
- Сила спрацьовування: Приблизно 45 г
- Відстань подорожі: 3.2 мм
- Точка спрацьовування: 1.5 мм
Зображення: Крупний план view of the Gateron Low Profile Red Switches on the Mytrix M16 controller, highlighting their hot-swappable nature.
Detachable 7-Layer Design
The controller features a 7-layer detachable board design, enabling customization of the keyboard's graphics and internal components.
Зображення: Розгорнуте view of the Mytrix M16 controller, showing its 7-layer detachable design for customization, including ABS keycaps, acrylic sheets, switches, and PCB board.
DIY Screen & Artwork Support
Personalize your controller with custom artwork and screen displays.
Зображення: Прamples of custom artwork and screen displays on the Mytrix M16 controller, demonstrating DIY customization possibilities.
Генеральне прибирання
To clean your controller, use a soft, dry cloth. Avoid abrasive cleaners or solvents. For deeper cleaning, the detachable layers allow access to internal components.
Усунення несправностей
This section addresses common issues you might encounter with your Mytrix M16 controller.
Проблеми з підключенням
- Controller not detected: Ensure the USB-C cable is securely connected to both the controller and the device. Try a different USB port or cable.
- No data flow: If the controller powers on but is not recognized by any system (Windows, PopOS, consoles), attempt to access the web конфігуратор.
Web Configuration Access
The Mytrix M16 features a built-in embedded web configuration interface for advanced settings and firmware updates.
- Тримайте ПОЧАТОК button while plugging the device into your computer.
- The controller should enter a special mode, often displaying an IP address on its small screen.
- Відкрийте a web browser on your computer and navigate to the displayed IP address.
- If the browser times out or no device is connected, ensure your computer's network settings allow connection to local devices.
Double Inputs or Unresponsive Buttons
- Double inputs: This can sometimes be caused by outdated firmware. Access the web configurator to check for and install the latest firmware updates.
- Кнопки не реагують: The controller supports hot-swappable switches. If a specific button is unresponsive, try replacing its switch with one of the included spares using the keycap puller.
Оновлення мікропрограми
Firmware updates are crucial for optimal performance and resolving potential issues. The Mytrix M16 uses an open-source GP2040-CE firmware.
- Перед оновленням: It is highly recommended to back up your current settings and take screenshots of all web configurator pages. Firmware updates can sometimes reset settings or change interface elements.
- Post-update issues: If LEDs or the screen are deactivated after an update, you may need to re-enable them through the web configurator, as default firmware settings might disable these features.
- Refer to the official GP2040-CE documentation for detailed instructions on firmware updates and configuration.
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | M16 |
| Розміри (Д x Ш x В) | 27 см x 20 см x 1 см (10.63 дюйма x 7.87 дюйма x 0.39 дюйма) |
| вага | 1.92 фунта (приблизно 0.87 кг) |
| Чіпсет | GP-2040-CE (40nm process technology) |
| Затримка | Всього 1 мс |
| Перемикачі | Gateron Low Profile Red Switches (Hot-swappable) |
| RGB освітлення | 4 preset modes, customizable colors |
| Налаштування | 7-layer detachable design, DIY artwork support |
| Режими керування | X-input, Switch, PS3/D-input, PS4, Keyboard |
| Особливості | Turbo function, SOCD cleaning, M1/M2 custom buttons, embedded web конфігурація |
Image: Diagram illustrating the physical dimensions of the Mytrix M16 controller: 27 cm (10.63") length, 20 cm (7.87") width, and 1 cm (0.39") thickness.
Гарантія та підтримка
Mytrix is committed to providing quality products and customer satisfaction. For technical support, warranty claims, or any inquiries, please contact Mytrix customer service.
- Обслуговування клієнтів: Refer to the Mytrix official webсайт або вашу платформу для покупок, щоб отримати контактну інформацію.
- Гарантія: Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for warranty services.
