1. Вступ
This manual provides essential information for using the xTool Starter Material Kit with your xTool M1 Ultra 10W/20W Craft Machine. The kit includes a selection of materials designed to help users explore the capabilities of their laser and blade cutting machine.
For detailed operation of the xTool M1 Ultra machine itself, please refer to the machine's dedicated user manual.
2. Вміст упаковки
The xTool Starter Material Kit includes the following items:
- 1 x Hexagon White Marble and Wood Coaster
- 1 x 3mm Basswood Plywood Sheet
- 1 x 3mm Walnut Plywood Sheet
- 1 x 0.5mm Flexible Magnetic Sheet
Зображення 1: закінченоview of the materials included in the xTool Starter Material Kit. From left to right, a light-colored wood sheet (basswood), a darker wood sheet (walnut), a black flexible magnetic sheet, and a hexagon coaster with a white marble top and wood base.
3. Сумісність
This material kit is designed for use with the xTool M1 Ultra 10W/20W Craft Machine. Ensure your machine is compatible before using these materials.
4. Налаштування та підготовка
- Розпакування: Carefully remove all materials from their packaging. Inspect for any damage.
- Підготовка робочого місця: Ensure your xTool M1 Ultra machine is set up in a well-ventilated area, as laser processing can produce fumes. Follow all safety guidelines provided in your machine's manual.
- Розміщення матеріалу: Place the chosen material flat on the working platform of your xTool M1 Ultra. Ensure it is securely positioned to prevent movement during processing.
- Регулювання фокусу: Refer to your xTool M1 Ultra manual for instructions on proper focus adjustment for the material thickness.
5. Інструкція з експлуатації
These materials are intended for laser engraving and cutting with the xTool M1 Ultra. Always refer to the xTool Creative Space software for recommended settings for each material type.
- Налаштування програмного забезпечення: Open xTool Creative Space and select the appropriate material profile. If a specific profile for these exact materials is not available, start with generic settings for similar materials (e.g., 3mm basswood plywood) and perform test cuts.
- Тестові розрізи: It is highly recommended to perform small test cuts or engravings on a scrap piece of the material to verify optimal power and speed settings before processing your final project.
- Заходи безпеки: Always wear appropriate eye protection and ensure proper ventilation when operating the laser machine. Never leave the machine unattended during operation.
6. Material Usage Guidelines
6.1. Hexagon White Marble and Wood Coaster
- Гравірування: Suitable for laser engraving on both the marble and wood surfaces. Adjust settings carefully for each material type.
- Прибирання: Очистити рекламоюamp тканина. Уникайте агресивних хімікатів.
6.2. 3mm Basswood Plywood Sheet
- Різання: Excellent for laser cutting intricate designs.
- Гравірування: Provides good contrast for laser engraving.
- Адгезія: Can be painted, stained, or glued after processing.
6.3. 3mm Walnut Plywood Sheet
- Різання: Suitable for laser cutting, offering a darker edge finish.
- Гравірування: Produces a rich, dark engraving with good detail.
- Зовнішній вигляд: Features a distinct grain pattern.
6.4. 0.5mm Flexible Magnetic Sheet
- Різання: Can be cut with the blade module of the xTool M1 Ultra. Laser cutting is generally not recommended for magnetic materials due to potential fumes and material degradation.
- застосування: Ideal for creating custom magnets for various surfaces.
7. Обслуговування та зберігання
- Зберігання: Store all materials in a cool, dry place away from direct sunlight and excessive humidity to prevent warping or degradation.
- Прибирання: Keep materials free from dust and debris before processing to ensure optimal results.
8. Вирішення проблем
If you encounter issues while using the materials, consider the following:
- Uneven Cuts/Engravings:
- Ensure the material is perfectly flat and secured on the workbed.
- Verify the focus settings of your laser machine.
- Check for debris on the laser lens or blade.
- Material Not Cutting Through:
- Increase laser power or decrease speed in the software settings.
- Ensure the blade is sharp and correctly installed for cutting the magnetic sheet.
- Excessive Burning/Charring:
- Decrease laser power or increase speed.
- Ensure proper ventilation and use of an air assist system if available.
For machine-specific troubleshooting, consult your xTool M1 Ultra user manual or xTool support resources.
9. Технічні характеристики
| компонент | Кількість | Dimensions/Thickness |
|---|---|---|
| Hexagon White Marble and Wood Coaster | 1 | Standard coaster size |
| Basswood Plywood Sheet | 1 | товщина 3 мм |
| Walnut Plywood Sheet | 1 | товщина 3 мм |
| Flexible Magnetic Sheet | 1 | товщина 0.5 мм |
Product Dimensions (Kit Packaging): 12.99 x 1.57 x 13.39 дюймів
Вага виробу (комплект): 1.74 фунта
Номер моделі товару: M1 Ultra Laser Material Kit
10. Гарантія та підтримка
For warranty information regarding the xTool Starter Material Kit, please refer to the official xTool website or contact xTool customer service. This material kit is subject to the general warranty terms for xTool accessories.
If you require technical assistance or have questions about the materials, xTool offers multi-channel support:
- Підтримка електронною поштою: Звертайтеся електронною поштою для отримання детальної інформації.
- Живий чат: Available for immediate assistance on the xTool webсайт.
- Підтримка по телефону: For direct communication with a technical service team member.
- Форуми спільноти: Join the official xTool Facebook group or other community forums for peer support and tips.
The xTool technical service team aims to provide a reply within 24 hours for most inquiries.
