Syntech B0D62W5GTH

Інструкція користувача передавача-приймача Syntech B0D62W5GTH Bluetooth 5.3

Model: B0D62W5GTH

вступ

The Syntech B0D62W5GTH is a versatile 2-in-1 Bluetooth 5.3 audio adapter designed to function as both a transmitter and a receiver. This device allows you to wirelessly connect your Bluetooth headphones or earbuds to non-Bluetooth audio sources, such as in-flight entertainment systems, gym equipment, or older car stereos. It also enables you to stream audio from your smartphone or tablet to wired speakers or car audio systems. Featuring an LED display for easy operation and dual pairing capability, this adapter enhances your audio experience with stable, low-latency connectivity.

Вміст упаковки

Будь ласка, перевірте, чи всі перелічені нижче предмети входять до вашої упаковки:

  • Syntech Bluetooth Transmitter/Receiver (B0D62W5GTH)
  • Чохол для транспортування
  • Захисний силіконовий чохол
  • Карабін
  • Dual 3.5mm AUX Adapter (for airplane use)
  • Зарядний кабель USB-C
  • Аудіокабель 3.5 мм
Syntech B0D62W5GTH Bluetooth Transmitter Receiver and accessories

Image: Syntech B0D62W5GTH device, 3.5mm audio cable, carrying case, carabiner, and dual 3.5mm AUX adapter.

Діаграма продукту

Ознайомтеся з компонентами та елементами керування пристрою:

Diagram of Syntech B0D62W5GTH showing buttons and ports

Зображення: Спереду та збоку view of the Syntech B0D62W5GTH. Labels include Visible Screen, Pairing Button, Next/Volume Up Button, Previous/Volume Down Button, Power/Confirm/Pause Button, USB-C Charging Port, and TX/RX Mode Switch.

  • Visible Screen: Displays device status, pairing information, and volume.
  • Кнопка сполучення: Ініціює сполучення через Bluetooth.
  • Кнопка «Далі»/«Збільшення гучності»: Navigates forward or increases volume.
  • Кнопка «Попередній»/«Зменшення гучності»: Navigates backward or decreases volume.
  • Power/Confirm/Pause Button: Powers on/off, confirms selections, or plays/pauses audio.
  • Порт зарядки USB-C: Для зарядки пристрою.
  • Перемикач режимів передачі/прийому: Перемикає між режимами передавача (TX) та приймача (RX).

Налаштування

1. Зарядка пристрою

Before initial use, fully charge the Syntech B0D62W5GTH. Connect the provided USB-C charging cable to the device's USB-C port and the other end to a standard USB power adapter (not included). A full charge takes approximately 1.5 hours and provides up to 12 hours of operation.

Syntech B0D62W5GTH charging with USB-C cable

Image: The Syntech B0D62W5GTH connected to a power outlet via its USB-C charging cable, indicating charging status.

2. Налаштування режиму передавача (TX)

Use TX mode to send audio from a non-Bluetooth source (e.g., airplane entertainment, TV, gym equipment) to your Bluetooth headphones or earbuds.

  1. Перемикання в режим передачі: Locate the TX/RX switch on the side of the device and slide it to the 'TX' position.
  2. Увімкнення: Press and hold the Power/Confirm/Pause button for 3 seconds to turn on the device. The screen will display 'Pairing...'
  3. Підключення до джерела звуку: Plug the 3.5mm audio cable into the Syntech adapter's audio jack and the other end into the audio output of your desired source (e.g., airplane seat audio jack). If the source has a dual 3.5mm jack, use the provided dual AUX adapter.
  4. Парні навушники: Put your Bluetooth headphones or earbuds into pairing mode. The Syntech adapter will automatically search for nearby Bluetooth devices.
  5. Select and Confirm: Use the Next/Volume Up or Previous/Volume Down buttons to navigate through the detected devices on the Syntech's screen. Once your headphones are highlighted, press the Power/Confirm/Pause button to confirm the connection.
Syntech B0D62W5GTH connected to an airplane entertainment system

Image: The Syntech B0D62W5GTH connected to an airplane seat's audio jack, transmitting audio to wireless earbuds.

3. Налаштування режиму приймача (RX)

Use RX mode to receive audio from a Bluetooth-enabled device (e.g., smartphone, tablet) and play it through a wired audio system (e.g., car stereo, home speakers).

  1. Перемикання в режим RX: Slide the TX/RX switch on the side of the device to the 'RX' position.
  2. Увімкнення: Press and hold the Power/Confirm/Pause button for 3 seconds to turn on the device. The screen will display 'Pairing...'
  3. Підключення до аудіосистеми: Plug the 3.5mm audio cable into the Syntech adapter's audio jack and the other end into the AUX input of your car stereo or home speaker system.
  4. Створення пари з телефоном/планшетом: On your smartphone or tablet, go to Bluetooth settings and search for new devices. Select 'B100' from the list to connect.
  5. Відтворення аудіо: Once connected, any audio played on your phone or tablet will be streamed wirelessly to your wired audio system.
Syntech B0D62W5GTH connected to a car's AUX input

Image: The Syntech B0D62W5GTH connected to a car's AUX input, streaming music from a smartphone.

4. Подвійне сполучення

The Syntech B0D62W5GTH supports connecting to two Bluetooth headphones simultaneously in TX mode, allowing two users to share audio from a single source.

  1. Ensure the first pair of headphones is already connected in TX mode (follow steps 1-5 above).
  2. Press the Bluetooth Pairing button on the Syntech adapter. The screen will indicate it is searching for a second device.
  3. Put your second pair of Bluetooth headphones into pairing mode.
  4. Once detected, use the navigation buttons to select the second device on the screen and press the Power/Confirm/Pause button to connect.
Syntech B0D62W5GTH connected to two pairs of headphones

Image: The Syntech B0D62W5GTH connected to an airplane entertainment system, with two pairs of headphones (AirPods and over-ear headphones) receiving audio simultaneously.

Інструкція з експлуатації

Основні елементи керування

КнопкафункціяОперація
Power/Confirm/PausePower on/off, Decline Call, Play/Pause, Answer Call/Hang Up, Confirm connection (TX Mode)Long Press (Power on/off, Decline Call), Short Press (Play/Pause, Answer Call/Hang Up, Confirm connection)
Bluetooth-паруванняBluetooth Pairing, Clear the MemoryShort Press (Bluetooth Pairing), Long Press (Clear the Memory)
Попередній/Зменшити гучністьPrevious Song, Volume Down, Downward Selection (TX Mode)Short Press (Previous Song), Long Press (Volume Down), Short Press (Downward Selection)
Далі / Збільшення гучностіNext Song, Volume Up, Upward Selection (TX Mode)Short Press (Next Song), Long Press (Volume Up), Short Press (Upward Selection)
Перемикач режимів TX/RXSelect the Mode (Transmitter or Receiver)слайд

Технічне обслуговування

  • Тримайте пристрій у чистоті, протираючи його м’якою сухою тканиною.
  • Уникайте впливу на пристрій екстремальних температур, вологості або прямого сонячного світла.
  • Не намагайтеся самостійно розбирати або ремонтувати пристрій, оскільки це призведе до втрати гарантії.
  • Store the device in its protective carrying case when not in use to prevent damage.

Усунення несправностей

Проблеми з підключенням

If you experience long pairing times (around 90 seconds), unstable connections, or high latency:

  • Try reconnecting the device.
  • Ensure your headphones or earbuds are in proper pairing mode.
  • Consider using different headphones to rule out headphone-specific issues.
  • Clear the memory of previously paired devices on the Syntech adapter by long-pressing the Bluetooth Pairing button.

Volume Issues

If you encounter problems with audio volume:

  • Ensure the transmitter or your headphones are not in pause mode.
  • Long press the Next/Volume Up button on the Syntech adapter to increase the volume.
  • Restart the device and your connected audio equipment.

Немає живлення

  • Ensure the device is fully charged. Connect it to a power source using the provided USB-C cable.
  • Перевірте, чи зарядний кабель та адаптер живлення працюють належним чином.

Технічні характеристики

ОсобливістьДеталь
МодельB0D62W5GTH
Версія Bluetooth5.3
Технологія підключенняДОП
ОсобливостіBuilt-In Microphone, HD Display, Receiver Transmitter 2 in 1
Джерело живленняЖивлення від батареї (1 літій-полімерна батарея в комплекті)
Термін служби батареї (режим передачі)До 10 годин
Термін служби батареї (режим прийому)До 12 годин
Час зарядкиприбл. 1.5 години
Дальність бездротового зв'язкуДо 15 метрів (50 фути)
Вага товару5 унції
Розміри4.02 x 3.46 x 1.73 дюймів

Інформація про безпеку

УВАГА:

  • This device emits radio waves and should be used with caution to avoid interference with other wireless devices.
  • Do not expose the battery to extreme temperatures or humidity.
  • Keep the device away from fire and other heat sources.
  • Do not dispose of the battery in fire. Follow local regulations for battery disposal.
  • Використовуйте лише наданий зарядний кабель та адаптер.
  • Не використовуйте пристрій під час зарядки.
  • Do not use the device while sleeping or in a moving vehicle.
  • Always follow the manufacturer's instructions for safe use and disposal.

Гарантія та підтримка

Syntech provides a 12-month worry-free period for this product. For any questions, concerns, or technical assistance, please contact our dedicated customer support team. Refer to the product packaging or the official Syntech webна сайті для отримання контактної інформації.