Anderic RR7222T434

Anderic RR7222T434 Remote Control User Manual

Model: RR7222T434 | Brand: Anderic

вступ

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Anderic RR7222T434 Replacement Remote Control. This remote is designed to seamlessly replace specific Home Decorators Collection and Hampton Bay ceiling fan remotes, offering convenient control over fan speeds, light functions, and reverse mode.

Інформація про сумісність

Critical Compatibility Note: This Anderic RR7222T434 Replacement Remote is specifically designed to replace original remotes with the FCCID: CHQ7222T434 or UC7222T434 printed on their back. It also replaces the TR171B Remote Control made for the MR77A receiver. This remote will НІ function with original remotes that have FCCID: UC7222T (without "434") or CHQ7222T (without "434").

It is engineered for use with Home Decorators Collection and Hampton Bay Altura 68" Ceiling Fans that utilize MR77A & MR77A.2 receivers.

Вміст упаковки

Інструкції з налаштування

1. Встановлення батареї

Locate the battery compartment on the back of the remote control. Insert one A23 12-Volt battery, ensuring correct polarity (+/-) as indicated inside the compartment. Close the battery cover securely.

2. DIP Switch Pairing

The Anderic RR7222T434 remote uses DIP switches for pairing with your ceiling fan receiver. The DIP switches are typically located inside the battery compartment of the remote and on the ceiling fan receiver unit itself. Both sets of DIP switches must match for the remote to function correctly.

  1. Identify DIP Switches: Open the battery cover on your new Anderic remote. Locate the series of small switches (DIP switches).
  2. Access Receiver DIP Switches: For your ceiling fan, you may need to access the receiver unit, which is usually located in the fan's canopy (the part that attaches to the ceiling). Consult your ceiling fan's original manual for instructions on accessing its receiver and DIP switches.
  3. Налаштування матчу: Carefully match the position of the DIP switches on your new Anderic remote to the exact pattern of the DIP switches on your ceiling fan's receiver. Ensure each switch is set to the identical ON or OFF position.
  4. Тест функціональності: After matching the DIP switch settings, reassemble the fan canopy and close the remote's battery cover. Test the remote's functions to ensure proper operation.

If the remote does not operate the fan, double-check the DIP switch settings on both the remote and the receiver.

Інструкція з експлуатації

The Anderic RR7222T434 remote control provides intuitive control over your ceiling fan and light. Refer to the image below for button identification.

Anderic RR7222T434 Remote Control with buttons labeled for fan speed, power, reverse, and light.

зображення: Фронт view of the Anderic RR7222T434 remote control. It is black with light gray and beige buttons. From top to bottom, there are three oval buttons labeled '3', '2', and '1' for fan speeds. Below these are a power button (circle with vertical line) and a reverse button (circle with two arrows forming a loop). At the bottom, there is a large circular beige button with a light bulb icon for light control. The brand "ANDERIIC" and model "RR7222T434" are printed at the bottom.

Технічне обслуговування

Заміна батареї

When the remote's performance diminishes or it stops responding, it is likely time to replace the battery. Follow the battery installation steps outlined in the "Setup Instructions" section. Always use a fresh A23 12-Volt battery for optimal performance.

прибирання

To clean the remote control, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the remote's surface or internal components.

Усунення несправностей

проблемаМожлива причинаРішення
Пульт не реагує на вентилятор.Неправильні налаштування DIP-перемикача.Verify and match the DIP switch settings on both the remote and the fan receiver.
Remote's range is reduced or intermittent.Низький заряд батареї.Replace the A23 12-Volt battery.
Light function works, but fan does not.Wiring issue or fan motor problem.Consult your ceiling fan's manual or a qualified electrician.
Remote does not control all functions.Incompatible fan receiver or remote model.Ensure your original remote's FCCID matches CHQ7222T434 or UC7222T434.

Технічні характеристики

Гарантія та підтримка

For warranty information or technical support, please contact Anderic customer service. Refer to the product packaging or the official Anderic webсайт для отримання найактуальнішої контактної інформації та гарантійних умов.

Ви можете відвідати Магазин Anderic на Amazon для отримання додаткової інформації про продукт.

Пов'язані документи - RR7222T434

попередньоview Інструкції з встановлення Anderic FAN9T та FAN28R/UC7067FCRX
Детальний посібник з встановлення системи дистанційного керування стельовими вентиляторами Anderic FAN9T та FAN28R/UC7067FCRX, включаючи підключення приймача, сполучення з дистанційним керуванням та встановлення батарейок.
попередньоview Керівництво з встановлення стельового вентилятора-ресивера Anderic UC7058RY
Детальні інструкції з встановлення та сполучення стельового вентилятора-ресивера Anderic UC7058RY. Містить примітки щодо сумісності з пультами дистанційного керування Anderic RR7078TR та RR7083TR. Надає покрокові інструкції з налаштування та дистанційної синхронізації.
попередньоview Керівництво з встановлення пульта дистанційного керування та приймача для стельового вентилятора Anderic UC7301R / RR7222T
Покрокові інструкції з встановлення приймача стельового вентилятора Anderic UC7301R та пульта дистанційного керування RR7222T, що охоплюють важливі моменти безпеки, встановлення приймача, сполучення пульта дистанційного керування та заміну батарейок.
попередньоview Інструкція з використання пульта дистанційного керування ANDERIC® RRTX001R
Інструкція користувача для пульта дистанційного керування ANDERIC® RRTX001R з детальним описом встановлення батарейок, інструкцій зі сполучення, функцій виробу та встановлення настінного кронштейна.
попередньоview Керівництво з встановлення та використання універсального термостатичного комплекту дистанційного керування стельовим вентилятором Anderic
Вичерпний посібник з встановлення та експлуатації універсального термостатичного комплекту дистанційного керування стельовим вентилятором Anderic HD3, включаючи інформацію про безпеку, усунення несправностей та гарантійні умови.
попередньоview Інструкція користувача універсального пульта дистанційного керування RR1002
Інструкція користувача для універсального пульта дистанційного керування RR1002, що містить інструкції щодо програмування, введення коду, використання клавіш швидкого доступу, функції навчання, ідентифікації коду, скидання до заводських налаштувань, налаштування таймера сну та блокування налаштувань.