Wishiot 1.5g Micro Digital Analog Linear Servo Instruction Manual

1. Вступ

The Wishiot 1.5g Micro Digital Analog Linear Servo (Model FH-1502) is a lightweight and high-performance linear actuator designed for ultra-micro 3D flight aircraft and other weight-sensitive remote control projects. This servo supports both digital and analog control signals, offering versatility and precise control. Its compact size and efficient design make it an ideal choice for applications where space and weight are critical factors.

2. Особливості продукту

• Dual Control Compatibility: Supports both digital and analog control signals for broad compatibility.
• Легкий дизайн: Optimized for 1-cell powered applications where minimal weight is crucial.
• Висока продуктивність: Features a high-torque motor combined with fast response for precise movements.
• Ideal for Ultra-Micro 3D Flight: Specifically designed to meet the demands of ultra-micro 3D aircraft and indoor flyers.
• Міцна конструкція: Equipped with a standard nylon gear type and standard wiring for reliable operation.

3. Технічні характеристики

Примітка: Due to manufacturing variations, the appearance of the servo may differ slightly between new and old production batches. Both types are functionally identical and shipped randomly.

Image 3.1: Comparison of new and old models of the Wishiot 1.5g Micro Linear Servo. Both types are functionally equivalent.

4. Налаштування та встановлення

1. Монтаж: Securely mount the servo in your model using appropriate fasteners. Ensure the mounting location allows for the full range of linear movement without obstruction. Given its lightweight nature, avoid over-tightening screws which could damage the servo casing.
   

   Зображення 4.1: Верх view of the Wishiot 1.5g Micro Linear Servo, showing mounting points.

2. Підключення проводів: Connect the servo to your receiver or flight controller according to the following color code:
   • Червоний дріт: Positive power supply (+)
   • Чорний дріт: Negative power supply (-) / Ground
   • Білий дріт: Вхід сигналу
   Ensure correct polarity to prevent damage to the servo or your control system.
   

   Зображення 4.2: Крупний план view of the servo's internal mechanism and wiring connections.

3. Джерело живлення: The servo operates within a voltage range of 3.7V to 5V. Ensure your power source (typically a 1-cell LiPo battery or BEC) provides stable voltage в цьому діапазоні.
4. Control System Integration: Connect the signal wire to the appropriate channel on your receiver or flight controller. Configure your radio transmitter or flight controller software to send the correct digital or analog servo signals.

5. Інструкція з експлуатації

Once properly installed and connected, the Wishiot 1.5g Micro Linear Servo will respond to control signals from your radio system. The servo's linear actuator will move back and forth, providing precise control for surfaces such as ailerons, elevators, or rudders in ultra-micro aircraft.

• Початковий тест: Before flight or full operation, perform a range test to ensure the servo moves smoothly and covers the required travel distance without binding.
• Центрування: Most control systems allow for servo centering adjustments. Ensure the servo is centered correctly for neutral control surface positions.
• Коригування подорожі: Adjust the servo travel limits on your transmitter or flight controller to prevent over-driving the servo, which can lead to damage or reduced lifespan.

Зображення 5.1: закінченоview of the 1.5g Micro Digital Analog Linear Servo, highlighting its application for ultra-micro 3D flight aircraft.

6. Технічне обслуговування

The Wishiot 1.5g Micro Linear Servo is designed for durability, but proper maintenance can extend its lifespan and ensure consistent performance.

• Тримати в чистоті: Regularly inspect the servo for dirt, dust, or debris that could impede its movement. Use a soft brush or compressed air to gently clean the mechanism.
• Уникайте перешкод: Ensure that the linear actuator's path is free from any obstructions during operation. Binding can cause excessive strain on the motor and gears.
• Перевірте підключення: Periodically check all wiring connections for looseness or damage. Secure connections are vital for reliable operation.
• Зберігання: Коли сервопривід не використовується, зберігайте його в чистому, сухому місці, подалі від екстремальних температур та прямих сонячних променів.

7. Вирішення проблем

If you encounter issues with your Wishiot 1.5g Micro Linear Servo, refer to the following troubleshooting steps:

• Сервопривід не відповідає:
  • Check power connections (Red and Black wires) to ensure they are secure and correctly polarized.
  • Перевірте потужність блоку живленняtage is within the 3.7V-5V operating range.
  • Confirm the signal wire (White) is correctly connected to the receiver/flight controller and that the control signal is being sent.
  • Test with a different servo channel or a known working servo to isolate the problem.
• Erratic or Jerky Movement:
  • Inspect for any physical obstructions preventing smooth linear movement.
  • Check for loose wiring connections, especially the signal wire.
  • Переконайтеся, що джерело живлення стабільне та не перевантажуєтьсяtagе краплі.
  • Verify that the control signal is clean and free from interference.
• Servo Binding or Stalling:
  • Ensure the servo is not mechanically overloaded or trying to move beyond its physical limits. Adjust linkages or control surface throws if necessary.
  • Check for foreign objects or debris in the linear mechanism.

8. Гарантія та підтримка

Specific warranty information for the Wishiot 1.5g Micro Digital Analog Linear Servo is not provided in the product details. For any warranty claims, technical support, or further assistance, please contact the retailer or manufacturer (TYCIONG) directly through their official support channels. Retain your proof of purchase for any potential claims.