вступ
This manual provides instructions for the installation, operation, and maintenance of your Pixio PS1S Wave Blue Single Monitor Arm Stand. This monitor arm is designed to support a single monitor up to 32 inches in size and up to 19.8 lbs in weight, featuring VESA compatibility and integrated cable management for an organized workspace.
Image: The Pixio PS1S Wave Blue Single Monitor Arm Stand, shown with a monitor mounted, illustrating its design and functionality.
Технічні характеристики продукту
| Особливість | Специфікація |
|---|---|
| Модель | PS1S Wave Blue |
| Supported Monitor Size | До 32 дюйма |
| Supported Monitor Weight | від 2.2 фунтів до 19.8 фунтів (від 1 кг до 9 кг) |
| Сумісність VESA | 75х75 мм, 100х100 мм |
| Тип монтажу | Desk Mount (C-Clamp або люверс) |
| Діапазон висоти | 8.46" to 19.49" (215-495mm) |
| Максимальне розгинання руки | 9.06" to 11.02" (230-280mm) |
| матеріал | метал |
| Колір | Синій |
| Item Weight (Arm) | 6.34 фунта |
| UPC | 850044656516 |
Image: Detailed specifications including height range and maximum arm extension for the Pixio PS1S monitor arm.
Image: Visual representation of the monitor arm's compatibility with screen sizes ranging from 17 to 32 inches.
Налаштування та встановлення
Before beginning installation, ensure all components are present and your desk surface is clean and stable. The Pixio PS1S monitor arm offers two installation methods: C-Clamp і Громмет.
1. Виберіть спосіб кріплення
- C-Clamp Installation (Default): Suitable for desks with an edge. This method does not require drilling.
- Установка втулки: Requires a pre-drilled hole in your desk. This provides a more permanent and flush mount.
Image: Visual guide demonstrating the C-Clamp and Grommet installation options for the monitor arm, highlighting their differences.
2. Attach the Desk Mount
Follow the specific instructions provided with your product for attaching the chosen desk mount to your desk. Ensure the mount is securely fastened to prevent instability.
3. Assemble the Monitor Arm
Connect the arm segments as indicated in the assembly diagram. The design allows for assembly from above the desk surface.
4. Attach the VESA Plate to Your Monitor
Locate the VESA mounting holes on the back of your monitor. Use the provided screws to attach the detachable VESA plate to your monitor. Ensure the screws are tightened securely but do not overtighten.
5. Mount the Monitor to the Arm
Carefully lift your monitor with the attached VESA plate and slide it onto the VESA head of the monitor arm until it clicks into place. Verify that the monitor is securely attached before releasing це.
Image: A monitor securely attached to the Pixio PS1S arm, viewed from the rear, highlighting the VESA mounting mechanism.
Operating and Adjusting the Monitor Arm
The Pixio PS1S monitor arm offers flexible adjustments to achieve an ergonomic viewположення.
1. Adjusting Height and Position
Gently move the monitor to your desired height and position. The gas spring mechanism allows for smooth vertical and horizontal adjustments. The arm can extend and retract, and swivel horizontally.
2. Adjusting Tilt and Swivel
The VESA head allows for tilting the monitor up or down and swiveling it left or right. You can also rotate the monitor from landscape to portrait orientation.
3. Adjusting Spring Tension
If your monitor sags or does not stay in position, the spring tension may need adjustment. Use the provided hex key to adjust the tension screw located on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust gradually until the monitor holds its position firmly.
Зображення: Детальний view of the monitor arm's built-in spring tension mechanism, showing how to adjust it with a hex key for optimal monitor support.
4. Кабельний менеджмент
Route your power and video cables through the integrated cable management trays on the underside of the arm. This helps keep your workspace tidy and free of clutter.
Image: The Pixio PS1S monitor arm with cables neatly routed through its integrated cable management system, promoting an organized desk.
Технічне обслуговування
Регулярне технічне обслуговування забезпечує довговічність та оптимальну роботу вашого кронштейна для монітора.
- Прибирання: Протріть поверхні підлокітників м’якоюamp тканиною. Уникайте абразивних засобів для чищення або розчинників, які можуть пошкодити покриття.
- Перевірка натягу: Periodically check the spring tension. If the monitor feels loose or sags, readjust the tension using the hex key as described in the "Operating" section.
- Перевірка кріплення: Ensure all screws and fasteners are tight. Do not overtighten.
Усунення несправностей
Зверніться до наступних поширених проблем та їх рішень:
- Monitor Sags or Does Not Stay in Position:
рішення: The spring tension needs to be increased. Use the provided hex key to turn the tension screw clockwise. Adjust gradually until the monitor holds its position.
- Monitor Arm is Too Stiff to Move:
рішення: The spring tension may be too high for your monitor's weight. Use the provided hex key to turn the tension screw counter-clockwise to decrease tension.
- Monitor Wobbles or Feels Unstable:
рішення: Переконайтеся, що стіл клamp or grommet mount is securely tightened to the desk. Also, check that the VESA plate is firmly attached to both the monitor and the arm.
- Cables Do Not Fit in Management Trays:
рішення: Ensure cables are routed individually and not bundled excessively. If cables are too thick or numerous, consider external cable management solutions.
Гарантія та підтримка
For warranty information and technical support, please contact Pixio directly. Details regarding specific warranty periods and support channels can typically be found on the official Pixio webсайті або через продавця, де було придбано товар.
Виробник: Піксіо
Бренд: Піксіо
Контакти: Refer to the official Pixio website for customer service and support contact information.
