1. Вступ
1.1 продукт закінченоview
The FibroPool FH285-i is a state-of-the-art full inverter electric heat pump designed for efficient heating of swimming pools and spas. Utilizing advanced technology, it transfers heat from the air to the water, offering an energy-efficient alternative to traditional gas or propane heaters. This manual provides essential information for the safe and effective installation, operation, and maintenance of your FH285-i heat pump.
1.2 Основні характеристики
- Full Inverter Technology: Allows for efficient heating even at lower ambient temperatures, optimizing energy consumption.
- Екологічно чиста експлуатація: Powered by electricity, reducing reliance on fossil fuels and minimizing environmental impact.
- Широка сумісність: Suitable for in-ground pools up to 17,500 gallons and above-ground pools up to 27 feet round or 18 by 33 feet oval.
- Міцна конструкція: Features a weather-resistant chassis designed for outdoor elements.
- Зручні елементи керування: Equipped with a digital control panel for easy temperature setting and monitoring.
- Інтелектуальне підключення: Wi-Fi and app integration enable remote adjustments from your smartphone.
- Висока ефективність: Engineered with high-pressure differential compressors and titanium heat exchangers for superior energy performance.
Малюнок 1: Спереду view of the FibroPool FH285-i Heat Pump, showcasinзавдяки компактному дизайну та цифровому дисплею.
2. Інформація про безпеку
Read all safety instructions carefully before installing, operating, or performing maintenance on the heat pump. Failure to follow these instructions could result in serious injury, death, or property damage.
2.1 Загальні заходи безпеки
- Професійна установка: Installation and electrical wiring must be performed by a qualified professional in accordance with all local and national electrical codes.
- Небезпека ураження електричним струмом: Ensure the unit is properly grounded. Do not operate if the power cord or plug is damaged. Disconnect power before servicing.
- Вода та електрика: Keep the heat pump away from direct water spray from hoses or sprinklers. Never immerse the unit in water.
- Діти та домашні тварини: Тримайте дітей та домашніх тварин подалі від пристрою під час роботи.
- Вентиляція: Ensure adequate airflow around the unit. Do not block air intake or exhaust vents.
- Холодоагент: This unit contains refrigerant. Only qualified personnel should handle refrigerant.
- вага: The unit is heavy (175 pounds). Use proper lifting techniques or equipment during installation to prevent injury.
3. Налаштування та встановлення
Proper installation is crucial for the performance and longevity of your heat pump. It is highly recommended that installation be performed by a certified pool professional or electrician.
3.1 Розпакування та перевірка
- Carefully remove the heat pump from its packaging.
- Перевірте пристрій на наявність будь-яких ознак пошкоджень під час транспортування. Негайно повідомте про будь-які пошкодження своєму постачальнику.
- Verify that all included accessories (unions, drain plug adapter) are present.
3.2 Міркування щодо розміщення
The heat pump should be installed outdoors in a location with adequate air circulation, away from direct sunlight and corrosive environments. Maintain minimum clearances around the unit as specified in the diagram below.
Figure 2: Product dimensions and basic specifications for placement planning.
3.3 Електричні підключення
The FH285-i requires a dedicated 240V/60Hz electrical circuit. Consult a qualified electrician to ensure proper wiring, breaker sizing, and compliance with all local electrical codes. The unit's electrical requirements are critical for safe and efficient operation.
3.4 Сантехнічні підключення
The heat pump should be plumbed into your pool's filtration system after the filter and before any chemical feeders. Use the included 1.5-inch unions for connection. Ensure all connections are watertight to prevent leaks.
4. Інструкція з експлуатації
Once installed, operating your FibroPool heat pump is straightforward thanks to its intuitive digital control panel and smart app integration.
4.1 Панель керування надview
The digital control panel on the front of the unit allows for easy temperature setting and monitoring. It displays the current water temperature, desired set temperature, and operational status.
4.2 Початковий запуск
- Ensure the pool pump is running and water is flowing through the heat pump.
- Turn on the electrical power to the heat pump at the breaker.
- The unit will perform a self-diagnostic check.
- Use the digital controls to set your desired water temperature.
4.3 Встановлення температури
Use the up and down arrows on the control panel to adjust the target water temperature. The heat pump will automatically operate to reach and maintain this temperature.
4.4 Wi-Fi and App Integration
The FH285-i supports Wi-Fi connectivity, allowing you to control and monitor your heat pump remotely via a dedicated smartphone application (e.g., Smart Life app). Download the app from your device's app store and follow the in-app instructions to connect your heat pump.
Figure 3: Remote control and monitoring via the Smart Life app.
5. Технічне обслуговування
Regular maintenance ensures optimal performance and extends the lifespan of your FibroPool heat pump.
5.1 Регулярне прибирання
- Очищення котушки: Periodically inspect and clean the evaporator coil (fins) to remove leaves, dirt, and debris. Use a soft brush or low-pressure water.
- Очистити перешкоди: Переконайтеся, що жодні предмети не блокують отвори для впуску або випуску повітря.
- Зовнішнє очищення: Wipe down the exterior casing з оголошеннямamp тканину, щоб вона була чистою.
5.2 Утеплення
If you live in an area with freezing temperatures, proper winterization is essential to prevent damage:
- Відключіть електричне живлення пристрою.
- Drain all water from the heat pump's plumbing lines using the drain plug.
- Store the unit under a protective cover or indoors if possible.
5.3 Seasonal Startup
Before starting the unit for the swimming season:
- Remove any winterization covers.
- Reconnect plumbing and ensure all connections are secure.
- Ensure the pool pump is running and water is flowing through the heat pump before restoring electrical power.
6. Вирішення проблем
This section provides solutions to common issues you might encounter. For problems not listed here, or if solutions do not resolve the issue, contact FibroPool customer support.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Heat pump not turning on | No power; tripped breaker; low water flow. | Check power supply and breaker; ensure pool pump is running and filter is clean. |
| Недостатнє опалення | Ambient temperature too low; dirty evaporator coil; incorrect temperature setting; undersized unit for pool volume. | Verify operating temperature range; clean coil; check set temperature; ensure unit is appropriately sized for your pool. |
| Пристрій видає незвичний шум | Loose components; fan obstruction; refrigerant issue. | Inspect for loose parts or obstructions; if noise persists, contact professional service. |
| Витік води | Loose plumbing connections; damaged O-rings. | Tighten connections; inspect and replace O-rings if necessary. |
| Проблеми з підключенням Wi-Fi | Poor Wi-Fi signal; incorrect network settings; app issues. | Ensure strong Wi-Fi signal; reconfigure network settings in app; restart app or unit. |
7. Технічні характеристики
Detailed technical specifications for the FibroPool FH285-i heat pump.
| Специфікація | Значення |
|---|---|
| Номер моделі | FH285-i |
| Розміри продукту (Д x Ш x В) | 28 x 26 x 37 дюймів |
| Вага товару | 175 фунта |
| Max Pool Volume (In-ground) | До 17,500 галонів |
| Max Pool Size (Above-ground) | Up to 27 foot round or 18 by 33 foot oval |
| Електричні вимоги | 240В/60Гц |
| Теплова ефективність | 5.50 COP (Coefficient of Performance) |
| Виробник | Фібропул |
Figure 4: EnergyGuide label indicating the thermal efficiency of the FH285-i.
8. Гарантія та підтримка
FibroPool stands behind the quality of its products. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official FibroPool webсайт. Зберігайте чек про покупку для гарантійних претензій.
8.1 Підтримка клієнтів
If you have any questions, require technical assistance, or need to report an issue, please contact FibroPool customer support. Contact information can typically be found on the product packaging, the official FibroPool webсайт або вашу документацію щодо придбання.
Щоб отримати найактуальнішу інформацію та ресурси підтримки, відвідайте FibroPool Store on Amazon.
