вступ
This manual provides essential instructions for the safe assembly, operation, and maintenance of your INTEX Prism 8,592 Liters Structural Pool. Please read all instructions carefully before setup and use to ensure proper function and safety. Retain this manual for future reference.
Image: The INTEX Prism Structural Pool, showcasing its complete setup including the pool, filter pump, and safety ladder, with individuals enjoying the pool.
Інформація про безпеку
УВАГА: Недотримання цих інструкцій може призвести до серйозних травм або смерті.
- Потрібен нагляд дорослих: Always provide active adult supervision to children and individuals with disabilities in and around the pool.
- Без дайвінгу: This pool is not designed for diving. Shallow water can cause serious injury.
- Очистити область: Keep children away from the pool cover to avoid entanglement. Ensure the area around the pool is clear of obstacles.
- Використання хімікатів: Handle pool chemicals according to manufacturer instructions. Improper use can cause skin and eye irritation.
- Електрична безпека: Connect the filter pump to a grounded 110v outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords.
- Безпека сходів: Use the ladder only for entering and exiting the pool. Do not allow children to play on the ladder.
Вміст упаковки
Перед початком складання перевірте наявність усіх компонентів:
- 1 x INTEX Prism Structural Pool Liner (8,592 Liters capacity)
- 1 x INTEX Filter Pump (2,006 Liters/hour, 110v)
- 1 x INTEX Safety Ladder
- Complete Metal Frame Components (legs, horizontal beams, pins)
- Шланги та Clamps for Filter Pump Connection
- Ground Cloth (may be included or recommended separately)
Інструкції з налаштування
- Вибір сайту: Choose a firm, level surface for pool installation. The area must be free of sharp objects, debris, and have adequate drainage. Ensure the ground can support the weight of the filled pool.
- Розміщення ґрунтової тканини: Lay the ground cloth (if included) on the selected site. This protects the pool liner from punctures.
- Збірка рами: Following the diagrams provided in the separate assembly guide, connect all metal frame components. Ensure all T-joints, horizontal beams, and vertical legs are securely interlocked with the spring-loaded pins.
- Монтаж вкладиша: Carefully spread the pool liner within the assembled frame. Position the drain plug away from the main traffic area. Smooth out any major wrinkles in the bottom of the liner.
- Підключення насоса: Підключіть фільтрувальний насос до позначених вхідного та вихідного отворів на облицюванні басейну за допомогою наданих шлангів таamps. Переконайтеся, що всі з'єднання герметичні, щоб запобігти протіканню.
- Збірка драбини: Assemble the safety ladder according to its specific instructions. Place the ladder securely against the pool.
- Наповнення басейну: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner from the center outwards. Stop filling when the water reaches the recommended level, typically just below the top frame rail.
Image: The INTEX Prism Structural Pool fully assembled and filled with water in a garden setting, with individuals enjoying the pool.
Image: The INTEX Prism Structural Pool fully assembled and filled with water, situated in a garden environment.
Інструкція з експлуатації
- Початкова експлуатація насоса: Ensure the filter pump is properly connected to the pool and a grounded 110v GFCI outlet. Open all valves to allow water flow. Turn on the pump. It may take a few moments for water to circulate and air to purge from the system.
- Щоденна робота: Run the filter pump for 2-4 hours daily to maintain water circulation and filtration. The exact duration may vary based on pool usage, water clarity, and environmental conditions.
Технічне обслуговування
- Хімічний склад води: Regularly test your pool water's pH and chlorine levels using a pool test kit. Maintain pH between 7.2 and 7.6, and chlorine levels between 1-3 ppm. Adjust as needed with appropriate pool chemicals.
- Прибирання: Skim debris (leaves, insects) from the water surface daily. Vacuum the pool floor as necessary to remove settled dirt and particles.
- Картридж фільтра: Turn off and unplug the filter pump before cleaning or replacing the filter cartridge. Clean or replace the filter cartridge every 2 weeks, or more frequently with heavy pool use or if water appears cloudy.
- Зимоутворення: For regions with freezing temperatures, consult local guidelines for proper pool winterization procedures to prevent damage to the pool and equipment.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Хмарна вода | Insufficient filtration, improper chemical balance, heavy use. | Check/clean filter cartridge, adjust water chemicals, run pump for longer periods. |
| Фільтр-насос не працює | No power, clogged impeller, airlock in system. | Check power connection and GFCI, clean impeller, bleed air from pump. |
| Витік води | Loose hose connections, damaged liner, faulty drain plug. | Затягніть шланг клamps, inspect liner for punctures (use repair kit), ensure drain plug is secure. |
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | INTEX |
| Назва моделі | Призма |
| Номер моделі | 26715 |
| Ємність | 8,592 літра |
| Зібрані розміри | 366 см (діаметр) x 99 см (висота) |
| Матеріал вкладиша | 3-ply PVC-polyester |
| Матеріал рами | Epoxy-treated Steel |
| Швидкість потоку фільтрувального насоса | 2,006 літрів/годину |
| Filter Pump Voltage | 110v |
| Колір | Сірий |
| Приблизна вага упаковки | 40 кг |
Гарантія та підтримка
For detailed warranty information, product registration, or customer support, please refer to the documentation included with your INTEX Prism Structural Pool. It is recommended to keep your original purchase receipt as proof of purchase for any warranty claims. You may also visit the official INTEX webсайт для отримання додаткової допомоги та контактної інформації.
