Ansmann 1001-0143

ANSMANN BC 6-12V/2A Smart Charger Instruction Manual

1. Вступ

The ANSMANN BC 6-12V/2A Smart Charger is an intelligent, automatic 8-stage battery charger designed for safe and efficient charging of various 6V and 12V batteries. It is suitable for lead-acid, lead-gel, lead-fleece, and 12V LiFePO4 batteries with capacities ranging from 4 Ah to 60 Ah. This charger ensures optimal battery performance and extends battery life through its advanced charging process and comprehensive safety features.

У коробці:

2. Налаштування та підключення

Before connecting the charger, ensure the charger is unplugged from the mains power supply. Select the appropriate connection method for your battery: battery clamps for temporary connection or ring terminals for a more permanent installation.

Етапи підключення:

  1. Connect the red positive (+) charger cable to the positive (+) terminal of the battery.
  2. Connect the black negative (-) charger cable to the negative (-) terminal of the battery.
  3. Переконайтеся, що всі з’єднання надійні.
  4. Plug the charger into a suitable mains power outlet. The charger will automatically begin its initial checks.
ANSMANN BC 6-12V/2A Smart Charger with battery clamps, ring terminals, and power cable

Figure 1: ANSMANN Smart Charger with included accessories for various connection types.

Person connecting the ANSMANN charger to a car battery

Малюнок 2: Впрample of connecting the charger to a car battery using battery clamps.

ANSMANN charger connected to a motorcycle battery

Малюнок 3: Впрample of connecting the charger to a motorcycle battery.

3. Інструкція з експлуатації

The charger features an 8-stage fully automatic intelligent charging process. Use the 'MODE' button to select the appropriate charging program and current for your battery.

Selecting Charging Programs:

Натисніть РЕЖИМ button to cycle through the available charging programs:

For each program, you can select a charging current of either 1A or 2A. The LCD display will indicate the selected mode and charging status.

8-Stage Automatic Charging Process:

The charger automatically progresses through the following stages to optimize battery charging and maintenance:

  1. Перевірка батареї: Assesses the battery's initial status and voltage.
  2. Desulfation: Applies pulsed current and voltage to break down sulfate crystals on lead plates, restoring battery capacity.
  3. Аналіз: Temporarily halts charging to measure the battery's no-load voltage.
  4. Reactivation Charge: Prepares the battery for the main charge, resuming desulfation if necessary.
  5. Main Charge: Charges the battery with a constant current until it reaches a high state of charge.
  6. Charge Optimization: Gradually reduces the charging current to achieve maximum battery capacity.
  7. томtage Контроль: Monitors the battery's charge status to ensure optimal voltagе рівні.
  8. Holding Charge (Maintenance): Provides pulse maintenance charging as needed to prevent self-discharge and keep the battery fully charged.
Діаграма, що ілюструє 8-киtage charging process of the ANSMANN charger

Рисунок 4: Візуальне представлення 8-хtagавтоматичний процес заряджання.

4. Технічне обслуговування

The ANSMANN BC 6-12V/2A Smart Charger is designed for durability and minimal maintenance. It is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This allows for safe use in various environments.

The charger can remain connected to the battery for extended periods, providing a continuous holding charge to prevent self-discharge. This feature is ideal for vehicles stored for long durations, ensuring the battery remains fully charged and ready for use.

Periodically inspect the charger cables and connectors for any signs of damage or wear. Keep the charger clean and free from excessive dust or debris.

5. Troubleshooting and Safety Features

The ANSMANN Smart Charger incorporates multiple safety features to protect both the user and the battery during operation. If an issue occurs, the charger's LCD display may indicate an error or the charging process may not initiate.

Функції безпеки:

ANSMANN charger in a wet environment, illustrating protection features

Figure 5: The charger's robust design and protection features, including splash water resistance.

ANSMANN charger connected to various battery types, highlighting defect detection

Figure 6: The charger's universal compatibility and defect detection capability.

Поширені проблеми та рішення:

6. Технічні характеристики

ОсобливістьСпецифікація
Номер моделі1001-0143
Вхідний об'ємtage100-240 В змінного струму, 50/60 Гц
Вихідний випtage6 В / 12 В (постійний струм)
Струм зарядки1A / 2A (selectable)
Ємність акумулятора4 Аг - 60 Аг
Типи акумуляторівLead-Acid, Lead-Gel, Lead-Fleece, 12V LiFePO4
Зарядка Сtages8-Stage Автоматичний
Рейтинг захистуIP65 (захист від пилу та бризок води)
Розміри продукту7.09 x 3.11 x 1.93 дюйма (180 x 79 x 49 мм)
Вага товару1.03 фунта (0.47 кг)

7. Гарантія

The ANSMANN BC 6-12V/2A Smart Charger comes with a 3-річна гарантія виробника from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.

8. Підтримка

For further assistance, technical support, or warranty inquiries, please contact ANSMANN customer service. You can find contact information on the official ANSMANN webсайті або через вашого продавця.

For more information about ANSMANN products, visit the Ansmann Store on Amazon.

Пов'язані документи - 1001-0143

попередньоview ANSMANN BC 6-12V / 6A Inteligentní nabíječka autobaterií Návod k obsluze
Návod k obsluze pro inteligentní nabíječku autobaterií ANSMANN BC 6-12V / 6A. Pokrývá nabíjecí programy, připojení, bezpečnostní pokyny, řešení problémů a technické specifikace pro 6V a 12V olověné, AGM, gelové a 12V LiFePO4 baterie.
попередньоview Bedienungsanleitung ANSMANN POWERLINE 4 SMART Ladegerät
Umfassende Bedienungsanleitung für das intelligente ANSMANN POWERLINE 4 SMART Ladegerät zum Laden von NiMH- und NiCd-Akkus (AA/AAA). Enthält Informationen zu Funktionen, Sicherheit und technischer Spezifikation.
попередньоview Bedienungsanleitung: ANSMANN BC 6-12V / 10A Intelligentes Autobatterieladegerät
Umfassende Bedienungsanleitung für das ANSMANN BC 6-12V / 10A intelligente Autobatterieladegerät. Erfahren Sie mehr über die Funktionen, Sicherheitshinweise und Ladeprogramme für 6V und 12V Batterien.
попередньоview Ansmann Home Charger HC120PD User Manual
User manual for the Ansmann Home Charger HC120PD, a USB-C PD charger designed for operating devices with a standard USB interface. Provides safety instructions, operation guidelines, technical specifications, and disposal information.
попередньоview ANSMANN Energy Check LCD Battery Tester - Operation Manual
Comprehensive operation manual for the ANSMANN Energy Check LCD battery tester. Learn how to test various battery types, interpret results, troubleshoot issues, and understand safety and disposal guidelines.
попередньоview ANSMANN BTS-MINI Bluetooth Speaker User Manual
User manual for the ANSMANN BTS-MINI portable Bluetooth speaker, detailing setup, functions, safety guidelines, IPX7 waterproof rating, and disposal information.