УЛАНЗІ МТ-79

ULANZI MT-79 Extendable Tripod Instruction Manual

Модель: MT-79

1. Продукт закінчивсяview

The ULANZI MT-79 is a versatile and portable extendable tripod designed for cameras, video lights, and smartphones. Constructed from durable aluminum alloy, it offers stability and adjustable height for various photography and videography needs. Its compact design makes it suitable for travel and outdoor use, providing a reliable support system for your equipment.

2. Вміст упаковки

Перевірте наявність усіх компонентів в упаковці:

  • ULANZI MT-79 Tripod (1 Piece)
  • Note: Additional accessories such as smartphone mounts or Bluetooth clickers are not included and must be purchased separately.

3. Інструкції з налаштування

3.1 Unfolding the Tripod Legs

  1. Gently pull the tripod legs outwards until they are fully extended and locked into position. Ensure the legs are spread wide enough to provide a stable base.
  2. Confirm the anti-slip floor mats on the leg ends are making full contact with the surface for maximum stability.
ULANZI MT-79 Tripod with legs extended, showing anti-slip floor mats and aluminum alloy construction.

Зображення 1: The ULANZI MT-79 tripod with its legs extended, highlighting the anti-slip floor mats and the aluminum alloy construction for stability. The diagram also points out the ball head locking knob and tripod locking knob.

3.2 Підключення пристроїв

  1. Locate the 1/4" screw on the ball head of the tripod.
  2. Carefully screw your camera, video light, or smartphone clip onto the 1/4" screw until it is securely fastened.
  3. Ensure the device is firmly attached before proceeding.
Close-up of the ULANZI MT-79 tripod's 1/4 inch screw mount, demonstrating compatibility with various devices like fill lights, cameras, and mobile phone clips.

Зображення 2: Крупний план view of the 1/4" screw on the ULANZI MT-79 tripod, illustrating its wide compatibility with various devices such as fill lights, cameras, and mobile phone clips.

4. Інструкція з експлуатації

4.1 Регулювання висоти штатива

  1. To extend the tripod, twist the tripod locking knob counter-clockwise to loosen.
  2. Pull the telescopic sections upwards to achieve the desired height. The tripod can extend up to 207 cm (81 inches).
  3. Once the desired height is reached, twist the tripod locking knob clockwise to secure the sections firmly in place.
  4. Caution: Always ensure the tripod is stable at extended heights, especially with heavier devices.
ULANZI MT-79 tripod demonstrating various adjustable heights from 36cm to 204.5cm, with a smartphone mounted.

Зображення 3: The ULANZI MT-79 tripod showcasing its adjustable height capabilities, ranging from a compact 36cm to an extended 204.5cm (approximately 2 meters or 81 inches), with a smartphone attached.

4.2 Adjusting Ball Head Angle

  1. Loosen the ball head locking knob to allow free movement of the ball head.
  2. Adjust your attached device to the desired angle. The ball head supports 180° vertical rotation.
  3. Tighten the ball head locking knob clockwise to secure the device in position.
Diagram illustrating the 180-degree angle adjustment feature of the ULANZI MT-79 tripod's ball head, shown with an action camera and a smartphone.

Зображення 4: This image demonstrates the 180° angle adjustment feature of the ULANZI MT-79 tripod's ball head, allowing for flexible positioning of attached devices like action cameras and smartphones.

5. Технічне обслуговування

  • Прибирання: Протирайте штатив м’якою сухою тканиною після кожного використання, щоб видалити пил і бруд. Для стійкого бруду використовуйте злегкаamp тканиною, а потім ретельно висушіть. Уникайте агресивних хімікатів або абразивних засобів для чищення.
  • Зберігання: Зберігайте штатив у прохолодному, сухому місці, подалі від прямих сонячних променів та екстремальних температур. Перед зберіганням переконайтеся, що він повністю складений та чистий.
  • Огляд: Periodically check all screws, knobs, and leg locks for tightness. Tighten any loose components to maintain stability and safety.
  • Змащення: The telescopic sections and ball head mechanism are designed for smooth operation. Avoid applying lubricants unless specifically instructed by the manufacturer, as this may attract dust and impair function.

6. Вирішення проблем

проблемаМожлива причинаРішення
Штатив нестійкий або хитається.Legs not fully extended or locked; uneven surface; excessive weight.Ensure legs are fully extended and tripod locking knob is tightened. Place on a flat, stable surface. Do not exceed recommended weight capacity.
Device attached to ball head moves or sags.Ball head locking knob is loose; device not securely mounted.Tighten the ball head locking knob firmly. Ensure the device is properly screwed onto the 1/4" mount.
Телескопічні секції важко висувати або складати.Dust or debris inside sections; locking knob too tight.Clean the sections carefully. Loosen the tripod locking knob sufficiently before adjusting height.

7. Технічні характеристики

  • модель: МТ-79
  • матеріал: Алюміній Пластик
  • Maximum Extendable Height: Приблизно 207 см (81 дюймів)
  • Minimum Collapsed Height: Приблизно 36 см
  • Розміри продукту (ДxШxВ): 5.3 x 36.5 x 207 Centimeters (fully extended)
  • Вага товару: 550 г
  • Обертання кульової головки: 360° (horizontal), 180° (vertical)
  • Монтажний гвинт: 1/4 дюйма
  • Сумісні пристрої: Camera, Camera Video Light, Smartphone
  • колір: Чорний і Червоний
  • Країна походження: Китай

8. Гарантія та підтримка

Щоб отримати інформацію про гарантію та підтримку клієнтів, зверніться до офіційного сайту ULANZI. webсайт або зверніться до місцевого дистриб'ютора. Зберігайте чек про покупку як підтвердження покупки для будь-яких гарантійних претензій.

Manufacturer/Importer Contact:

33/06, Industrial Area, Site-2, Loni Road, Ghaziabad, Uttar Pradesh, India-201007
Служба підтримки клієнтів: 1800121000251