Продукт закінченийview
The OPT7 4pcs Mounting Brackets are specifically designed to securely affix your OPT7 Redline Standard LED Tailgate Light Bar to your vehicle. These robust aluminum brackets provide a reliable and stable mounting solution, ensuring your light bar remains firmly in place. They are custom-crafted to integrate seamlessly with OPT7 Redline products, offering an effortless installation process.
Вміст упаковки
- 4 x OPT7 Redline Standard LED Tailgate Light Bar Mounting Brackets (Aluminum, Silver)
- 4 кріпильних гвинтів
Image: Contents of the OPT7 Mounting Brackets package, showing four brackets and four screws.
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | ОПТ7 |
| Модель | FBA-TAILGATE-SINGLE-BRACKET-4PC |
| Підрахунок одиниць | 4.0 Кол |
| матеріал | Алюміній |
| Колір | Срібло |
| Вага товару | 0.4 унції |
| Розміри продукту (Д x Ш x В) | 5 x 1.5 x 0.5 дюймів |
| Тип монтажу | Кріплення дверей багажника |
Керівництво по установці
Необхідні інструменти (не включені):
- дриль
- Appropriate drill bit for pilot holes (if needed)
- Викрутка (рекомендується хрестова)
Кроки встановлення:
1. Prepare the Mounting Surface:
Ensure the area on your vehicle's tailgate where the light bar will be mounted is clean, dry, and free of debris. Mark the desired positions for the mounting brackets along the length of your OPT7 Redline Standard LED Tailgate Light Bar.
2. Position the Brackets:
Place each mounting bracket in its marked position. The brackets are designed to cradle the light bar securely. Ensure proper alignment before proceeding.
Image: Visual guide for securing the light bar into the mounting bracket using a screw.
3. Secure the Brackets:
Using the provided mounting screws, fasten each bracket firmly to the vehicle's surface. If necessary, drill small pilot holes before driving the screws to prevent damage to the surface or the screws. Ensure the brackets are tightly secured to provide maximum stability for the light bar.
4. Install the Light Bar:
Once all brackets are securely mounted, carefully slide or snap your OPT7 Redline Standard LED Tailgate Light Bar into the installed brackets. Ensure the light bar is fully seated and held firmly by all brackets.
5. Остаточна перевірка:
Gently tug on the light bar to confirm it is securely attached and does not wobble. Verify that the light bar is level and properly aligned with your vehicle's tailgate.
Технічне обслуговування
These mounting brackets are constructed from durable aluminum and require minimal maintenance. Periodically inspect the brackets and screws for any signs of loosening, corrosion, or damage. Tighten any loose screws as needed. Clean the brackets with a damp cloth and mild soap if they become dirty, avoiding abrasive cleaners that could damage the finish.
Усунення несправностей
Light Bar is Loose or Wobbles:
Ensure all mounting screws are tightened securely. Verify that the light bar is correctly seated within each bracket. If the issue persists, inspect the brackets for any deformation or damage that might prevent a snug fit. These brackets are designed specifically for OPT7 Redline products; ensure compatibility.
Screws Do Not Hold Firmly:
This may indicate that the pilot holes are too large or the mounting surface material is compromised. Consider using slightly larger screws (if appropriate for the bracket and surface) or relocating the brackets to a more secure area. Always ensure proper pilot hole size for the screws used.
Bracket Damage During Installation:
Avoid over-tightening screws, which can deform the aluminum. Ensure the light bar is inserted correctly into the bracket without excessive force. If a bracket is damaged, it should be replaced to ensure secure mounting.
Інформація про гарантію
OPT7 offers a 30-денний гарантійний термін for these mounting brackets, starting from the order date. This warranty covers replacements for manufacturing defects. To request a replacement, please refer to your order details on the purchase platform and follow the return for replacement process. This warranty is applicable only to OPT7 products.
Підтримка клієнтів
For technical assistance or support regarding your OPT7 products, please contact the OPT7 technical team. These brackets are designed exclusively for OPT7 products, and our support is tailored to ensure a seamless and optimized experience with the OPT7 brand.
Visit the official OPT7 Store for more information and contact options: OPT7 Amazon Store
