вступ
Wampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
Продукт закінченийview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.

малюнок 1: Фронт view з Wampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.

малюнок 2: Під кутом view з Wampler Catacombs pedal, highlighting its compact design and various control knobs.
Налаштування
Вимоги до живлення
Wampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
Connecting Your Pedal
- Підключіть свій інструмент (наприклад, гітару) до MONO IN or СТЕРЕО ВХІД гніздо з правого боку педалі за допомогою стандартного інструментального кабелю 1/4 дюйма.
- Підключіть МОНОВИХІД or STEREO OUT домкрат з лівого боку педалі до вашої ampпедаль ефекту lifier або next.
- Підключіть джерело живлення 9 В постійного струму до 9 В постійного струму вхідний роз'єм.
- For MIDI control, connect a MIDI cable to the MIDI введення.
Інструкція з експлуатації
Контроль надview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
Збереження та виклик пресетів
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
Технічне обслуговування
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Зберігайте педаль у прохолодному, сухому місці, подалі від прямих сонячних променів та екстремальних температур.
- Від’єднуйте живлення, коли не використовуєте пристрій протягом тривалого часу.
- Регулярно перевіряйте всі кабельні з'єднання на предмет надійності кріплення.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Немає звуку при натисканні педалі. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | Incorrect footswitch operation. | Переконайтеся, що ви тримаєте Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Шум або гул. | Заземлення, несправне джерело живлення, перешкоди. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
Технічні характеристики
- модель: CATACOMBS
- Розміри: 7.25 x 5.7 x 3.75 дюймів
- Вага товару: 1.39 фунта
- Джерело живлення: Corded Electric (9V DC, center-negative, power supply not included)
- Формат сигналу: Аналоговий
- Ефекти аудіовиходу: Затримка, Реверберація
- Sampлінг -курс: 48 кГц
- Audio Bit Depth: 24-бітний
- Пресети: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
Гарантія та підтримка
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampler педалі webсайт або зверніться безпосередньо до служби підтримки клієнтів. Зберігайте чек про покупку для гарантійних випадків.
Щоб отримати додаткову допомогу, відвідайте Wampler Store on Amazon.





