VDIAGTOOL VD10 OBD2 Scanner Code Reader Instruction Manual

1. Вступ

The VDIAGTOOL VD10 OBD2 Scanner Code Reader is a diagnostic tool designed to assist in identifying and resolving vehicle engine issues. This manual provides detailed instructions for the proper use and maintenance of your device.

Image 1: VDIAGTOOL VD10 OBD2 Scanner displaying the main diagnostic menu.

2. Продукт закінчивсяview і особливості

The VDIAGTOOL VD10 is a user-friendly device offering essential OBDII diagnostic functions. It is designed for compatibility with most OBDII-compliant vehicles manufactured after 1996 (US-based), 2006 (EU-based), and 2009 (Asian-based), operating on a 12V system.

• Read Codes (DTCs): Retrieves generic (P0, P2, P3, U0) and manufacturer-specific (P1, P3, U1) codes, along with pending codes.
• Очистити коди: Erases Diagnostic Trouble Codes and turns off the Malfunction Indicator Light (MIL).
• Живі дані: Displays real-time data stream from vehicle sensors (e.g., Engine RPM, Intake Air Temperature).
• View Стоп-кадр: Знімає знімок робочих умов у момент встановлення коду несправності.
• Готовність I/M: Checks the operational status of emission-related systems for smog inspection.
• Інформація про автомобіль: Retrieves VIN, Calibration ID(s), and Calibration Verification Numbers (CVNs).
• Бібліотека пошуку DTC: Provides definitions for over 3000 codes directly on the screen.
• Акумулятор Voltage Тест: Відображає поточний об'єм батареїtage.
• Plug & Play: Powers directly from the vehicle's OBDII port, requiring no external batteries.
• Багатомовна підтримка: Supports English, French, German, Spanish, Italian, and Russian.

Image 2: The VD10 scanner highlighting its wide compatibility with vehicles from various regions.

3. Що в коробці

Your VDIAGTOOL VD10 package includes the following items:

• VDIAGTOOL VD10 OBD2 Scanner Code Reader (1 unit)
• OBDII Connector Cable (1 unit)
• Посібник користувача (1 шт.)

4. Налаштування

1. Знайдіть порт OBDII: The 16-pin Data Link Connector (DLC) is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's service manual if you cannot locate it.
2. Підключіть сканер: Plug the OBDII connector cable into the vehicle's DLC. The scanner will power on automatically.
3. Увімкнути запалювання: Turn the vehicle's ignition to the 'ON' position. The engine should remain off.
4. Select Language and Units: Navigate to the 'Settings' menu on the scanner to select your preferred language and units of measurement (e.g., English, Metric).

Video 1: A demonstration of connecting the VD10 scanner to a vehicle's OBDII port and navigating initial setup options.

5. Інструкція з експлуатації

5.1 Зчитування діагностичних кодів несправностей (DTC)

To identify why the Malfunction Indicator Light (MIL) is on, follow these steps:

1. From the main menu, select 'Read Codes'.
2. Сканер відобразить будь-які збережені, очікуючі на розгляд або постійні коди несправностей.
3. Use the up/down arrows to scroll through the codes and view their definitions.

Image 3: The VD10 scanner displaying a Diagnostic Trouble Code (DTC) and its definition.

5.2 Скидання діагностичних кодів несправностей (DTC)

After diagnosing and resolving the underlying issue, you can clear the DTCs:

1. From the main menu, select 'Erase Codes'.
2. Confirm your selection when prompted. This will clear all emission-related diagnostic information and turn off the MIL.
3. Ensure the engine is off but the ignition is on when performing this function.

Image 4: The VD10 scanner showing the 'Erase Codes' confirmation screen, indicating the process to clear trouble codes.

5.3 Viewживі дані

To monitor real-time sensor data:

1. From the main menu, select 'Live Data'.
2. Виберіть view all items or select specific parameters.
3. The scanner will display numerical values for various engine parameters.

5.4 ViewСтворення даних стоп-кадру

Повторноview vehicle conditions at the time a fault occurred:

1. From the main menu, select 'View Freeze Frame'.
2. The scanner will display recorded sensor values and operating conditions.

5.5 I/M Readiness Test

To check if your vehicle is ready for an emissions test:

1. From the main menu, select 'I/M Readiness'.
2. The display will show the status of various emission monitors (OK, INC - Incomplete, N/A - Not Applicable).

Image 5: The VD10 scanner displaying the I/M Readiness screen, indicating the status of emission monitors.

5.6 Інформація про транспортний засіб

To retrieve specific vehicle details:

1. From the main menu, select 'Vehicle Info'.
2. The scanner will display the VIN, Calibration ID(s), and CVNs.

5.7 Пошук DTC

To manually look up a Diagnostic Trouble Code:

1. From the main menu, select 'DTC Lookup'.
2. Введіть код несправності за допомогою кнопок навігації.
3. The scanner will display the definition of the entered code.

5.8 Обсяг акумулятораtage Тест

To check the vehicle's battery voltage:

1. From the main menu, select 'Battery'.
2. Сканер відобразить поточний рівень заряду батареїtage and its status.

6. Технічне обслуговування

• Keep the scanner clean and dry. Use a mild detergent on a clean cloth to wipe the exterior.
• Уникайте впливу на пристрій екстремальних температур або прямих сонячних променів протягом тривалого часу.
• Store the scanner in a safe place when not in use to prevent damage.
• Regularly check for software updates to ensure optimal performance and compatibility with new vehicle models. Updates are free for the lifetime of the product.

7. Вирішення проблем

• Scanner Fails to Power On: Ensure the OBDII cable is securely connected to the vehicle's DLC. Verify the vehicle's ignition is in the 'ON' position.
• Linking Error: Check if the vehicle is OBDII compliant. Verify the ignition is on and the cable is securely connected. Turn the ignition off for about 10 seconds, then turn it back on and retry.
• Кодів не знайдено: If the MIL is not illuminated, there may be no current fault codes. Check for pending codes or I/M readiness status.
• Incorrect Data Display: Ensure the correct units of measurement are selected in the 'Settings' menu.

8. Технічні характеристики

• модель: VD10
• Дисплей: 2.2-inch LCD screen with white backlight and contrast adjustment
• Робочий випtage: 8.0 to 18.0 V (powered via vehicle battery)
• Підтримувані протоколи: CAN, ISO9141, KWP2000, J1850 PWM, J1850 VPW
• Розміри: 9.8 x 6.69 x 1.58 дюймів
• вага: 9.2 унції
• Робоча температура: 0°C до 60°C (32°F до 140°F)
• Температура зберігання: Від -20°C до 70°C (від -4°F до 158°F)

9. Гарантія та підтримка

The VDIAGTOOL VD10 OBD2 Scanner comes with a 3-year warranty from the date of purchase. Additionally, VDIAGTOOL provides lifetime free software updates for this product. For technical support or warranty claims, please refer to the contact information provided in your product packaging or visit the official VDIAGTOOL webсайт.