Daytech Wireless Caregiver Pager System Instruction Manual

1. Продукт закінчивсяview

The Daytech Wireless Caregiver Pager System is designed to provide quick and efficient communication between a patient or elderly individual and their caregiver. This system enhances independence for the user while offering peace of mind to family members and caregivers. It is suitable for use in private households, hospitals, and nursing homes.

Figure 1: Daytech Wireless Caregiver Pager System components, including two plug-in receivers and one watch-style call button.

2. Вміст упаковки

• 1 x Wireless Watch Pager
• 2 шт. штекерні приймачі
• 1 x Call Button (with lanyard and double-sided patch)
• 1 x Small Screwdriver (for battery replacement)
• 3 x AAA Batteries (included, for call button)

3. Інструкції з налаштування

3.1 Initial Setup and Powering On

1. Налаштування приймача: Plug the receiver unit into a standard electrical outlet. The receiver will power on automatically.
2. Call Button Battery Installation: The call button requires 3 AAA batteries (included). Use the provided small screwdriver to open the battery compartment, insert the batteries, and securely close the compartment.
3. Watch Pager: The watch pager comes with a pre-installed battery and is ready for use.

3.2 Modifying Ringtone and Pairing

The system comes pre-paired with standard factory settings. If you wish to change the ringtone or re-pair units, follow these steps:

Figure 2: Steps for ringtone selection and pairing.

1. Підключіть приймач: Ensure the receiver is plugged into a power socket.
2. Виберіть мелодію: On the receiver, press the 'Forward' or 'Backward' buttons to cycle through the 20 available ringtones until you find your preferred sound.
3. Увійдіть у режим сполучення: Press and hold the 'Volume Control' button on the receiver until it makes a "ding-dong" sound. This indicates the receiver is in pairing mode.
4. Парний передавач: While the receiver is in pairing mode, press the call button on the watch pager or the separate call button. The receiver will make another "ding-dong" sound, confirming successful pairing.

3.3 Call Button Installation Options

The call button can be used in various ways for convenience and accessibility:

• Носити навколо шиї: Attach the included lanyard to the call button for easy access.
• Носити на зап'ясті: The watch pager is designed to be worn on the wrist.
• Fix on Wall: Use the provided 3M double-sided patch to affix the call button to a wall, such as in a bathroom or by a bedside. The call button unit is splash-proof (IP55 rated).

Figure 3: Versatile placement options for the call button.

4. Інструкція з експлуатації

Using the Daytech Caregiver Pager System is straightforward:

1. Ініціювання дзвінка: When assistance is needed, simply press the large 'SOS' button on the watch pager or the 'CALL' button on the separate call button.
2. Receiving an Alert: The paired receiver(s) will sound the selected ringtone and may flash an indicator light, alerting the caregiver.
3. Регулювання гучності: The receiver has a volume control button to adjust the alert sound level. There are 5 volume levels available, up to 110 dB.

Figure 4: Key features of the watch pager.

The system offers a working range of up to 100ft/30m indoors, allowing caregivers freedom of movement within the home.

Figure 5: Wireless range illustration.

5. Технічне обслуговування

5.1 Battery Replacement for Call Button

The call button is powered by 3 AAA batteries. When the signal weakens or the button stops responding, it's time to replace the batteries. Use the provided small screwdriver to open the back cover, replace the old batteries with new ones, and secure the cover.

5.2 Загальний догляд

• Підтримуйте чистоту пристроїв, протираючи їх м’якою сухою тканиною.
• Avoid exposing the watch pager and call button to excessive moisture or immersion in water. While the call button is splash-proof, it is not designed for submersion.
• Зберігайте систему в прохолодному, сухому місці, якщо вона не використовується протягом тривалого часу.

6. Вирішення проблем

• No Alert from Receiver:
  • Ensure the receiver is properly plugged into a working electrical outlet.
  • Check if the call button or watch pager battery needs replacement.
  • Verify that the call button/watch pager is paired with the receiver (refer to Section 3.2).
  • Ensure the devices are within the operational range (up to 100ft/30m). Walls and other obstacles can reduce range.
• Weak Signal or Intermittent Alerts:
  • Relocate the receiver to a more central location or closer to the user.
  • Перевірте наявність потенційних перешкод від інших електронних пристроїв.
  • Replace batteries in the call button/watch pager.
• Ringtone Not Changing:
  • Follow the ringtone selection steps carefully (Section 3.2).
  • Ensure you are pressing the correct 'Forward' or 'Backward' buttons.

7. Технічні характеристики

8. Гарантія та підтримка

Daytech provides a full year's warranty and a money-back guarantee for this product. Round-the-clock customer service is available to assist with any queries or issues you may encounter.

For further assistance, please refer to the official Daytech webсайт або зверніться безпосередньо до служби підтримки клієнтів.