MOZA HBP Handbrake Instruction Manual

1. Вступ

Thank you for choosing the MOZA HBP Handbrake. This high-precision racing game controller is designed to enhance your simulation experience with its robust construction and advanced sensor technology. This manual provides essential information for the proper setup, operation, and maintenance of your device.

2. Інформація про безпеку

• Always ensure the device is securely mounted before use to prevent accidental movement or damage.
• Тримайте пристрій подалі від води, надмірного тепла та прямих сонячних променів.
• Do not attempt to disassemble or modify the handbrake. This may void your warranty and cause damage.
• Використовуйте лише надані кабелі та аксесуари.
• Зберігати в недоступному для маленьких дітей місці.

3. Вміст упаковки

Будь ласка, перевірте, чи всі перелічені нижче предмети входять до вашої упаковки:

• MOZA HBP Handbrake Unit
• USB-з'єднувальний кабель
• Mounting Hardware (screws, nuts, etc.)
• Additional Springs (for adjustment)
• Посібник користувача (цей документ)

4. Продукт закінчивсяview

The MOZA HBP Handbrake features a robust design and advanced components for precise control in racing simulations.

малюнок 4.1: Фронт view of the MOZA HBP Handbrake. This image displays the main unit with its lever in an upright position, showcasing the black anodized aluminum finish and the MOZA branding on the base.

малюнок 4.2: сторона view of the MOZA HBP Handbrake. This perspective highlights the adjustable lever mechanism and the mounting points on the base, demonstrating its compact and sturdy design.

малюнок 4.3: Під кутом view of the MOZA HBP Handbrake. This image provides a slightly different angle, emphasizing the robust construction and the precision-machined components of the handbrake.

малюнок 4.4: Задня view of the MOZA HBP Handbrake. This view shows the connection ports on the back of the base, including the USB port for direct PC connection and potentially a port for MOZA wheelbase connection.

Ключові характеристики:

• Преміальна конструкція: The entire body is CNC machined from aviation-grade aluminum with an anodized finish, ensuring wear resistance, sturdiness, and durability.
• Високоточний датчик: Utilizes a non-contact 16-bit high precision angle sensor for accurate and consistent input, providing a long, maintenance-free lifespan.
• Регульований важіль: The lever can be mounted horizontally or vertically to simulate both road and race car setups. Angles are adjustable to suit personal preferences.
• Customizable Feel: Adjust the rebound strength and brake travel by replacing the included springs. The stop position can also be changed according to personal needs.
• Гнучке підключення: Can be connected directly to a PC via USB or to a MOZA wheelbase that features a dedicated handbrake port.
• Ергономічний дизайн: Ergonomically engineered for comfortable use and easy mounting on most racing rigs. Optional table clamps are available for users without a full rig.

5. Налаштування

5.1 Mounting the Handbrake

The MOZA HBP Handbrake is designed for versatile mounting on various racing rigs. Use the provided mounting hardware to secure the handbrake to your setup. Ensure the mounting surface is stable and capable of supporting the device during intense use.

• Identify suitable mounting points on your racing rig or desk.
• Position the handbrake in your desired orientation (horizontal or vertical).
• Align the mounting holes on the handbrake base with your rig's mounting points.
• Secure the handbrake using the provided screws and nuts. Tighten firmly but do not overtighten.
• For desk mounting without a rig, consider purchasing the optional MOZA table clamp.

5.2 Connecting to PC or Wheelbase

The MOZA HBP Handbrake offers two primary connection methods:

• Пряме підключення до ПК:
  1. Connect one end of the provided USB cable to the USB port on the MOZA HBP Handbrake.
  2. Підключіть інший кінець USB-кабелю до вільного USB-порту на вашому ПК.
  3. Your operating system should automatically detect the device. Install any necessary drivers or software from the official MOZA website if prompted.
• MOZA Wheelbase Connection:
  1. If your MOZA wheelbase has a dedicated handbrake port, connect the appropriate cable (usually a RJ11 or similar connector, check your wheelbase manual) from the handbrake to the wheelbase.
  2. Refer to your MOZA wheelbase manual for specific connection instructions and configuration within the MOZA Pit House software.

After connection, ensure the handbrake is recognized in your racing simulation software or MOZA Pit House application.

6. Інструкція з експлуатації

6.1 Основна операція

The MOZA HBP Handbrake functions as a precise input device for racing simulations. Simply pull the lever to engage the handbrake in your game.

• Ensure the handbrake is properly connected and recognized by your PC or MOZA wheelbase.
• Launch your preferred racing simulation game.
• Navigate to the game's controller settings or input mapping section.
• Assign the handbrake input to the desired function within the game (e.g., "Handbrake," "E-Brake").
• Test the handbrake functionality within the game to ensure it responds correctly.

6.2 Adjusting Lever Angle and Feel

The MOZA HBP Handbrake allows for customization of its physical feel and orientation.

• Орієнтація важеля: The lever can be adjusted to a horizontal or vertical position. This typically involves loosening specific bolts on the lever mechanism, rotating the lever to the desired angle, and then re-tightening the bolts. Refer to the diagrams on the MOZA website or in the MOZA Pit House software for precise adjustment points.
• Rebound Strength and Travel: The handbrake comes with additional springs. To change the rebound strength or the total travel distance of the lever, you will need to replace the internal spring.
  1. Carefully disassemble the relevant section of the handbrake to access the spring mechanism.
  2. Remove the current spring and replace it with one of the alternative springs provided.
  3. Reassemble the handbrake, ensuring all components are securely fastened.
  4. Test the new feel and adjust as necessary.
• Stop Position: The physical stop position of the lever can also be adjusted. This typically involves adjusting a mechanical stop screw or plate. Consult the MOZA Pit House software or online resources for detailed instructions on this adjustment.

7. Технічне обслуговування

The MOZA HBP Handbrake is designed for durability and requires minimal maintenance due to its non-contact sensor. However, following these guidelines will help ensure its longevity:

• Прибирання: Wipe the device regularly with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
• Огляд: Періодично перевіряйте всі монтажні гвинти та з'єднання, щоб переконатися, що вони надійно затягнуті.
• Зберігання: When not in use for extended periods, store the handbrake in a clean, dry environment away from extreme temperatures.
• Змащення: The non-contact sensor does not require lubrication. Avoid applying lubricants to the sensor area. If mechanical parts feel stiff, a small amount of silicone-based lubricant can be applied to pivot points, but avoid contact with electronic components.

8. Вирішення проблем

If you encounter issues not listed here, or if the suggested solutions do not resolve your problem, please contact MOZA customer support.

9. Технічні характеристики

10. Гарантія та підтримка

MOZA products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official MOZA webсайт.

For technical support, troubleshooting assistance, or warranty claims, please contact MOZA customer support through their official webсайт:

Visit MOZA Support Webсайт

Please have your product model number (HBP) and purchase information ready when contacting support.