Remco KP5200KXW/O

Remco 6T70 6T75E (13-15) Gen 3 Transmission Banner Kit Instruction Manual

Model: KP5200KXW/O

вступ

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Remco 6T70 6T75E (13-15) Gen 3 Transmission Banner Kit. This kit is designed for automatic transmissions and includes an overhaul kit and clutches, providing the necessary components for a comprehensive transmission rebuild. Please read this manual thoroughly before beginning any work to ensure safe and correct procedures.

Що в коробці

Your Remco Transmission Banner Kit includes the following components:

Remco 6T70 6T75E Gen 3 Transmission Banner Kit components including the box, various gaskets, seals, and clutch plates.

Image: Contents of the Remco 6T70 6T75E Gen 3 Transmission Banner Kit. The image displays the product packaging box, along with various components laid out, including a full set of gaskets, seals, and a collection of clutch and steel plates, essential for a complete transmission overhaul.

Особливості продукту

Сумісність

This transmission banner kit is compatible with the following vehicle models and years. Please verify your vehicle's specifications before installation.

Модель транспортного засобуроківДвигун
Акадія2007 - 20173.6 /V6
Акадія2013 - 20153.6 /V6
Аура2007 - 20103.6 /V6
Каптіва2013 - 20153.6 /V6
Анклав2008 - 20113.6 /V6
Анклав2013 - 20173.6 /V6
Рівнодення2013 - 20153.6 /V6
Equinox Sport2008 - 20133.0, 3.6 /V6
G62007 - 20103.6 /V6
Імпала2013 - 20172.5, 3.6 /L4, V6
LaCrosse2011 - 20113.6 /V6
LaCrosse2013 - 20153.6 /V6
Малібу2008 - 20113.5, 3.6 /V6
Малібу Класика2008 - 20083.5 /V6
Outlook2007 - 20103.6 /V6
SRX2010 - 20133.0, 3.6 /V6
SRX2013 - 20163.0, 3.6 /V6
Рельєф місцевості2010 - 20133.0, 3.6 /V6
Рельєф місцевості2013 - 20153.6 /V6
Торрент2008 - 20103.6 /V6
Траверс2009 - 20103.6 /V6
Траверс2013 - 20173.6 /V6
VUE2008 - 20093.6 /V6
XL-72009 - 20093.6 /V6
XTS2013 - 20173.6 /V6

Налаштування та встановлення

Installing a transmission rebuild kit requires specialized knowledge and tools. It is highly recommended that installation be performed by a certified automotive technician. Improper installation can lead to severe damage to the transmission and vehicle.

Загальні кроки (рекомендовано професійне встановлення):

  1. Приготування: Ensure the vehicle is safely lifted and secured. Drain transmission fluid and remove the transmission from the vehicle.
  2. Розбирання: Carefully disassemble the transmission, noting the order and orientation of all components. Refer to a specific service manual for your vehicle's transmission model.
  3. Огляд: Inspect all hard parts for wear, damage, or scoring. Replace any worn components not included in this kit as necessary.
  4. Заміна компонентів: Replace all seals, gaskets, O-rings, clutch plates, and steel plates with the new components from the Remco kit. Ensure all new parts are properly lubricated with clean transmission fluid before installation.
  5. Повторне складання: Reassemble the transmission following the reverse order of disassembly. Pay close attention to torque specifications for all bolts.
  6. Установка: Reinstall the rebuilt transmission into the vehicle. Connect all lines, sensors, and electrical connectors.
  7. Заповнення рідиною: Fill the transmission with the manufacturer-specified type and amount of new transmission fluid.
  8. Первинна перевірка: Perform initial checks for leaks and proper fluid levels.

Примітка: This kit provides the necessary components for a rebuild. Detailed step-by-step instructions for transmission disassembly and reassembly are specific to each transmission model and are typically found in a dedicated factory service manual for your vehicle.

Інструкції з експлуатації

After a transmission rebuild, proper break-in and careful operation are crucial for longevity.

Технічне обслуговування

Regular maintenance is key to extending the life of your rebuilt transmission.

Усунення несправностей

This section provides general troubleshooting tips. For complex issues, consult a qualified technician.

проблемаМожлива причинаРішення
Пробуксовка трансмісіїLow fluid level, worn clutches (unlikely with new kit), internal pressure issues.Check fluid level and add if low. If problem persists, professional diagnosis is required.
Harsh shiftingIncorrect fluid level, faulty sensor, valve body issue.Verify fluid level. Consult a technician for diagnostic scan and repair.
Витік рідиниImproperly seated gasket/seal, damaged pan, loose bolts.Inspect for source of leak. Tighten bolts to spec, replace gasket/seal if damaged.
Немає зачеплення в передачахSeverely low fluid, internal mechanical failure.Check fluid level. If fluid is adequate, immediate professional inspection is needed.

Технічні характеристики

АтрибутДеталь
ВиробникRemco
БрендRemco
Вага товару2722 фунта
Розміри продукту18 x 5 x 16 дюймів
Номер деталі виробникаKP5200KXW/O
ASINB0BVL747JG
Дата першої доступності12 лютого 2023 р

Гарантія та підтримка

Щоб отримати інформацію про гарантію та підтримку клієнтів, зверніться до наступного:

Пов'язані документи - KP5200KXW/O

попередньоview Інструкція з встановлення мастильного насоса REMCO LP-HP023
Детальний посібник з встановлення масляного насоса та комплекту сантехнічного обладнання REMCO LP-HP023, розробленого для певних трансмісій Toyota, включаючи моделі Tacoma, Tundra, FJ Cruiser та 4Runner.
попередньоview 4L80E & 4L85E Automatic Transmission Parts Catalog
Comprehensive parts catalog for 4L80E and 4L85E automatic transmissions, including kits, filters, friction plates, steel plates, seals, bearings, and more, with part numbers and specifications.
попередньоview Комплект підсилювача тиску в магістралі Sonnax 6L80-LB1 для трансмісій GM - Посібник з встановлення та технічного обслуговування
Детальні інструкції та технічна інформація щодо комплекту підсилювача тиску в магістралі Sonnax 6L80-LB1, призначеного для покращення роботи трансмісії GM. Містить кроки встановлення, переваги та пов'язані продукти Sonnax.
попередньоview Посібник користувача та технічні характеристики материнської плати JGINYUE
Інструкція користувача для материнської плати JGINYUE від ERYING TECHNOLOGY, що містить детальний опис гарантії, опис інтерфейсів, запобіжні заходи щодо встановлення та технічні характеристики.
попередньоview Manuale del Dispositivo di Controllo Touch K50 I/O con Display Banner
Ця інструкція містить повну інформацію про пристрій сенсорного керування K50 I/O з дисплеєм Banner. Copre panoramica del prodotto, specifiche, schemi di cablaggio, accessori e procedure di manutenzione per applicazioni di automazione industriale.
попередньоview Zone 2/Division 2용 IS1+ CPU 모듈 사용자 설명서 - R. STAHL
R. STAHL Zone 2/Division 2용 IS1+ CPU 모듈 (시리즈 9442/35) 사용자 설명서. 설치, 작동, 안전 지침 및 기술 데이터에 대한 정보를 제공합니다.