Yaheetech Queen Upholstered Platform Bed Instruction Manual

1. Продукт закінчивсяview

The Yaheetech Queen Upholstered Platform Bed is designed for comfort and practicality, featuring a sturdy wood and metal frame with integrated storage drawers. This bed frame provides firm support for your mattress without the need for a box spring, and its low-profile design integrates seamlessly into various room decors.

Image: Fully assembled Yaheetech Queen Upholstered Platform Bed in dark gray, showcasinйого низькопрофільнийfile design and upholstered side panels.

2. Важлива інформація з безпеки

• Не перевищуйте максимальну рекомендовану вагу 800 фунтів.
• Be cautious when assembling the bed frame to avoid injury.
• Use the storage drawers with care to prevent tipping or damage.
• Ensure all screws and connections are tightened securely before use. Periodically check and re-tighten fasteners.
• Тримайте дрібні деталі подалі від дітей під час збирання.

3. Список компонентів

Before beginning assembly, ensure all parts are present and accounted for. Refer to the included installation manual for a detailed diagram of all components.

• Bed Frame Components (Metal and Engineered Wood)
• Дерев'яні рейки
• 3 шухляди для зберігання на колесах
• Монтажне обладнання (гвинти, шестигранний ключ)

Image: Detailed dimensions of the bed frame and storage drawers, along with the maximum weight capacity of 800 lbs.

Image: The bed frame with its three wire netting storage drawers extended, showing ample space for bedding items.

4. Налаштування та складання

Assembly typically requires two adults and can be completed in approximately 1-2 hours. Follow the steps below carefully.

4.1 Збірка рами

1. Розпакуйте всі компоненти та розкладіть їх на чистій м’якій поверхні, щоб запобігти подряпинам.
2. Connect the main frame sections using the provided screws and Allen wrench. Ensure all connections are finger-tight at this stagе., щоб дозволити внесення коригувань.
3. Прикріпіть опорні ніжки до каркаса.

4.2 Встановлення ламелей

1. Attach the plastic caps to the ends of the wood slats.
2. Insert the slats into the designated slots on the bed frame. Ensure the curved side of the slats faces upwards for optimal support.
3. Once all slats are in place, fully tighten all screws on the bed frame.

Зображення: Детальне view of how to attach plastic parts to the outer slats and fix the slats onto the bed frame.

4.3 Drawer Assembly

1. Assemble the wire netting drawers according to the manual.
2. Attach the wheels to the bottom of each drawer.
3. Slide the assembled drawers into the designated spaces under the bed frame. The fixtures will keep them in place.

Image: Close-up showing the smooth wheels and fixtures that prevent the drawers from sliding out unintentionally.

5. Інструкція з експлуатації

The three wire netting drawers are designed for easy access and storage. Simply pull the drawers outward from under the bed to access your stored items. Push them back in until they are flush with the bed frame for a neat appearance. The integrated fixtures will hold them securely.

6. Технічне обслуговування

• Догляд за тканиною: The upholstered fabric should be dry cleaned only. For minor spills, gently blot with a clean, dry cloth.
• Догляд за каркасом: Periodically check all screws and connections to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent noise.
• Догляд за ящиком: Для забезпечення безперебійної роботи слідкуйте за тим, щоб колеса шухляди не були забруднені сміттям.

7. Вирішення проблем

• Скрипучий шум: If the bed frame produces squeaking noises, check all assembly points and tighten any loose screws. Ensure slats are properly seated in their holders.
• Шухляди не ковзають плавно: Inspect the wheels for any obstructions or damage. Clean the wheels and the floor area where the drawers slide.
• Ліжко відчувається нестійким: Verify that all support legs are firmly in contact with the floor and that all frame connections are securely tightened. Ensure the mattress is properly centered on the slats.

8. Технічні характеристики

9. Гарантія та підтримка

Yaheetech products typically come with a manufacturer's warranty covering defects in materials and workmanship. For specific warranty details, claims, or technical support, please refer to the warranty information included with your purchase or visit the official Yaheetech website. You may also contact customer support via the Amazon platform for assistance.

For additional support, you can refer to the official Installation Manual (PDF) provided by the manufacturer: Завантажити посібник у форматі PDF