Wishiot Mini Super Light 3.7g Digital Servo GH-S37D Instruction Manual

1. Продукт закінчивсяview

The Wishiot Mini Super Light 3.7g Digital Servo GH-S37D is a compact and lightweight digital servo designed for precise control in various remote-controlled applications, including aircraft, helicopters, and boats. Its small size and low weight make it ideal for models where space and weight are critical factors. This servo provides reliable performance with a digital control system.

малюнок 1: The Wishiot GH-S37D Digital Servo shown with its included accessories, such as various servo horns and mounting screws. The servo features a blue translucent casing and a standard 3-pin connector.

Вміст упаковки:

• 1 x Wishiot Mini Super Light 3.7g Digital Servo GH-S37D
• Assorted Servo Horns
• Монтажні гвинти

2. Технічні характеристики

Refer to the table below for detailed technical specifications of the GH-S37D Digital Servo.

малюнок 2: A detailed specification table for the GH-S37D servo, outlining its performance characteristics and physical dimensions.

малюнок 3: Technical drawing illustrating the precise dimensions of the GH-S37D servo in millimeters.

3. Налаштування та підключення

Proper connection of the servo to your control system is crucial for correct operation. The GH-S37D servo uses a standard 3-pin connector.

3.1 Wire Color Code:

• Білий дріт: Signal (PWM input)
• Червоний дріт: Positive Power (+)
• Чорний дріт: Negative Power / Ground (-)

малюнок 4: The GH-S37D servo with its three-wire connector, clearly indicating the white (signal), red (positive), and black (negative) wires.

3.2 Connecting to a Servo Tester:

To test the servo or for basic control without a full RC system, you can connect it to a servo tester. Ensure the polarity is correct.

малюнок 5: The GH-S37D servo connected to a servo tester for functional testing. The servo's black wire connects to 'Out -', red to 'Out +', and white to 'Out S' on the tester.

3.3 Connecting to a Microcontroller (e.g., Arduino UNO):

For custom projects, the servo can be controlled by a microcontroller. Below is a common connection scheme for an Arduino UNO.

малюнок 6: The GH-S37D servo wired to an Arduino UNO board. The servo's black wire connects to GND, red to 3.3V, and white to digital pin D9 on the Arduino.

Note: Ensure your microcontroller can supply sufficient current for the servo, especially under load. An external power supply may be required for multiple servos or high-load applications.

4. Операція

The GH-S37D is a digital servo, meaning it receives a Pulse Width Modulation (PWM) signal to determine its position. The servo operates within a 90-degree range.

• Сигнал керування: The white signal wire receives PWM pulses, typically from a receiver or microcontroller. The pulse width dictates the servo's angular position.
• Обертання: The servo horn will rotate to the commanded position and hold that position against external forces within its torque limits.
• Робочий діапазон: The standard signal range of 1000 to 2000 microseconds corresponds to the full 90-degree working range of the servo.

малюнок 7: Крупний план view of the high-precision plastic gears inside the servo, responsible for its movement and torque transmission.

5. Технічне обслуговування

To ensure the longevity and optimal performance of your GH-S37D servo, follow these maintenance guidelines:

• Тримати в чистоті: Protect the servo from dust, dirt, and moisture, which can interfere with the gears and electronics.
• Уникайте перевантаження: Do not apply excessive force to the servo horn or attempt to rotate it beyond its mechanical limits, as this can damage the internal gears or motor.
• Перевірте підключення: Periodically inspect the wiring for any signs of wear, fraying, or loose connections.
• Зберігання: Store the servo in a dry, cool environment when not in use.

6. Вирішення проблем

If you encounter issues with your GH-S37D servo, consider the following troubleshooting steps:

• Сервопривід не рухається:
  • Verify power supply: Ensure the servo is receiving the correct voltage (3.6V-4.8V) and sufficient current.
  • Check wiring: Confirm all connections (signal, positive, negative) are secure and correctly polarized.
  • Test signal source: Use a servo tester or known working control system to check if the signal source is functioning correctly.
• Erratic Movement or Jittering:
  • Check for interference: Ensure the servo wires are not running too close to high-current wires or motors that could cause electrical interference.
  • Power supply issues: Insufficient or unstable power can cause erratic behavior. Try a different power source or add a capacitor to stabilize voltage.
  • Signal quality: A noisy or weak signal from the receiver/microcontroller can lead to jitter.
• Servo Not Holding Position:
  • Overload: The load on the servo might exceed its torque capabilities. Reduce the load or consider a higher torque servo.
  • Mechanical binding: Check for any physical obstructions preventing smooth movement of the servo horn or the mechanism it controls.

7. Гарантія та підтримка

For any questions, technical assistance, or mass customization inquiries regarding your Wishiot GH-S37D Digital Servo, please contact Wishiot customer support.

You can typically find a "Contact Seller" or "Ask a question" link on the product's purchase page or by visiting the official Wishiot store on the platform where you purchased the product.