1. Вступ
The SCULPFUN S10 Laser Engraver is a high-performance laser cutting and engraving machine designed for precision work on various materials, including wood and metal. It features a 10W optical power laser, an industrial-grade X-axis linear slide rail, and an air assist nozzle for enhanced cutting and engraving capabilities.
Figure 1: The SCULPFUN S10 Laser Engraver with various engraved and cut samples, showcasinг його універсальність.
2. Інформація про безпеку
WARNING: Laser radiation can cause eye injury and skin burns. Always wear appropriate laser safety goggles and ensure the protective cover is installed during operation. Never look directly into the laser beam.
- Не використовуйте машину без нагляду.
- Ensure proper ventilation in the work area to dissipate fumes.
- Keep children under 14 years old away from the product. Children over 14 require adult supervision.
- Avoid strong impacts on the machine.
- Do not use the laser directly on specular reflection objects, as this may cause injury or damage the laser.
- Always place an A4 steel pad or similar protective material under the workpiece to protect your table from laser damage.
Figure 2: The adjustable laser eye shield provides protection during operation. Always wear additional safety goggles.
3. Вміст упаковки
Verify that all components are present and undamaged upon unboxing:
Figure 3: All components included in the SCULPFUN S10 package. Ensure all parts are accounted for before assembly.
- SCULPFUN S10 Laser Engraver Frame
- Лазерний модуль 10 Вт
- Air Assist Nozzle and Tube
- Адаптер живлення
- USB кабель
- Лазерні захисні окуляри
- A4 Steel Pad
- Монтажні інструменти та гвинти
- Sample Wood Pieces
- Посібник користувача (цей документ)
4. Налаштування
Follow these steps to assemble and prepare your SCULPFUN S10 Laser Engraver for first use:
- Збірка рами: Assemble the aluminum frame components according to the included pictorial instructions. Ensure all screws are tightened securely.
- Встановлення лазерного модуля: Carefully attach the 10W laser module to the X-axis gantry. Connect the necessary cables.
- Air Assist Setup: Connect the air assist tube to the laser module's nozzle. If using an external air compressor (sold separately), connect it to the air assist tube.
- Живлення та USB-підключення: Connect the power adapter to the machine and a power outlet. Connect the USB cable from the machine to your computer.
- Встановлення програмного забезпечення: Install compatible laser engraving software such as LaserGRBL (for Windows) or LightBurn (for Windows and MAC). Refer to the software's documentation for detailed installation and setup.
- Регулювання фокусу: Adjust the laser focus according to the instructions in your software or the laser module's specific guide. Proper focus is crucial for optimal engraving and cutting results.
Відео 1: Оверview of the SCULPFUN S10 Laser Engraver, demonstrating its features including the air assist system, industrial-grade linear rail, and laser output power test. This video provides visual guidance on the machine's capabilities and some setup aspects.
5. Операційна
Operating the SCULPFUN S10 involves preparing your design, setting parameters, and initiating the engraving or cutting process.
5.1. Підготовка матеріалу
- Place the material securely on the working area. Use clamps if necessary to prevent movement.
- Ensure the A4 steel pad is positioned underneath the material to protect the surface below.
- Переконайтеся, що фокус лазера правильно налаштовано відповідно до товщини матеріалу.
5.2. Робота програмного забезпечення
- Open your chosen laser software (e.g., LightBurn, LaserGRBL).
- Імпортуйте або створіть свій дизайн.
- Configure laser parameters (power, speed, passes) based on the material type and desired outcome. Refer to the software's material settings guide for recommended values.
- попередньоview the job to ensure correct placement and scale.
- Розпочніть процес гравіювання/різання. Уважно стежте за машиною під час роботи.
Figure 4: Illustration of the 10W optical power laser with air assist, demonstrating its cutting capabilities on 3mm and 6mm plywood in a single pass. The air assist helps in achieving cleaner cuts by removing residue.
Figure 5: Comparison showing the cleaner cutting edge and lack of smoke stains achieved by the SCULPFUN S10 with air assist, compared to other lasers without it.
5.3. Key Features for Operation
- High Density 10W Laser Power: The S10's 10W laser provides strong cutting penetration and engraving capabilities, allowing it to cut high-density woods like MDF and walnut more easily.
- Industrial-grade Engraving Accuracy: Equipped with a high-precision anti-shake linear X-axis slide rail, the S10 minimizes wave line marks, resulting in more accurate engravings.
- Powerful High-Speed Air Assist: The advanced fluid mechanics design of the air assist nozzle can spray high-speed airflow up to 14.5m/s, significantly improving cutting efficiency and quality when connected to a compatible air compressor (30L/min 0.03Mpa recommended, purchased separately).
6. Технічне обслуговування
Регулярне технічне обслуговування забезпечує довговічність та оптимальну продуктивність вашого лазерного граверу.
- Очистіть лазерну лінзу: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam clarity and power.
- Змастіть рухомі частини: Apply a small amount of lubricant to the linear slide rails and belts as recommended in the detailed product manual to ensure smooth movement.
- Перевірте наявність слабких з’єднань: Regularly inspect all electrical and mechanical connections to ensure they are secure.
- Очистити сміття: Remove any accumulated dust, debris, or material scraps from the machine's working area and internal components.
7. Вирішення проблем
Поширені проблеми та їх можливі рішення:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Лазер не працює або слабкий вихідний сигнал | Loose cable connection, dirty lens, incorrect power settings, laser module malfunction. | Check all connections. Clean the laser lens. Verify power settings in software. Contact support if module is faulty. |
| Engraving/Cutting is inaccurate or wavy | Loose belts, unstable machine, incorrect focus, material movement. | Tighten belts. Ensure machine is on a stable surface. Re-adjust focus. Secure material. |
| Програмне забезпечення не підключається до машини | Incorrect COM port, driver issues, USB cable fault. | Verify COM port in software. Reinstall drivers. Try a different USB cable. |
| Excessive smoke or burning | Insufficient air assist, incorrect speed/power settings, material type. | Ensure air assist is active and sufficient. Adjust speed and power settings. Use appropriate materials. |
8. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | S10 |
| Вихідна потужність лазера | 10W (Optical Power) |
| Лазерний фокус | 0.08mm (Ultra-thin beam) |
| Точність гравірування | Industrial-grade (with X-axis linear slide rail) |
| Air Assist | Integrated Nozzle (requires external air compressor) |
| Airflow Speed (with recommended pump) | До 14.5 м/с |
| Материнська плата | Advanced 32-bit chip |
| Сумісність | LaserGRBL, LightBurn, Benbox, GrblController, LiteFire |
| Підтримувана ОС | Windows, MAC (LightBurn) |
| Підтримується File Формати | NC, BMP, JPG, PNG, DXF, and other image formats |
| Розміри продукту | 24.61 x 14.17 x 5.71 дюймів |
| Вага товару | 7.54 фунта |
9. Гарантія та підтримка
SCULPFUN provides a Гарантія 12 місяців for the S10 Laser Engraver. For any questions, technical assistance, or warranty claims, please contact SCULPFUN customer support directly. Refer to the contact information provided in your product packaging or on the official SCULPFUN webсайт.
For detailed machine instructions and parameter settings, always refer to the comprehensive manual provided with your product.
