вступ
The SUNLU S1 Plus Filament Dryer is designed to remove moisture from 3D printer filaments, which can absorb humidity from the air. Drying filament helps prevent common printing issues such as stringing, clogging, and poor adhesion, leading to improved print quality and smoother model surfaces. This manual provides detailed instructions for the proper use and maintenance of your S1 Plus Filament Dryer.
Продукт закінченийview
The SUNLU S1 Plus features a built-in circulation fan for uniform heating, a 2-inch LCD screen for displaying temperature and time, and two control buttons for easy operation. It is compatible with various filament types and diameters.
Figure 1: The SUNLU S1 Plus Filament Dryer, showing the clear lid and control panel.
Ключові характеристики:
- 360° Hot-air Circulation: Ensures uniform heating and effective moisture removal.
- Легке управління: Two-button control with a clear LCD screen for temperature and time settings.
- Регульовані налаштування: Customizable drying time (0-24 hours) and temperature (35°C-55°C).
- Широка сумісність: Supports 1.75mm, 2.85mm, and 3.00mm filament diameters.
- Низький рівень шуму: Operates quietly, less than 10dB.
- Print While Drying: Designed with rollers to allow filament to be used directly from the dryer during printing.
Інструкції з налаштування
- Розпакуйте сушарку: Carefully remove the SUNLU S1 Plus Filament Dryer and all accessories from its packaging. Ensure all components are present: the dryer unit, power adapter, and user guide.
- Підключіть живлення: Insert the power adapter cable into the power port located at the back of the dryer unit. Plug the power adapter into a standard electrical outlet.
- Навантаження нитки: Open the transparent lid of the dryer. Place a spool of 3D printer filament onto the rollers inside the dryer. Ensure the filament unwinds smoothly.
- Закрити кришку: Надійно закрийте прозору кришку.
Figure 2: Visual guide for initial setup and operation steps.
Інструкція з експлуатації
The S1 Plus features a simple two-button interface for setting drying parameters.
Figure 3: Control panel layout with LCD screen and buttons.
- Увімкнення: Press the left button to turn on the device. The LCD screen will illuminate, displaying the current temperature and default drying time.
- Встановити температуру:
- Press and hold the left button to enter temperature setting mode. The temperature value will flash.
- Use the left and right buttons to adjust the desired drying temperature between 35°C and 55°C.
- Press the left button again to confirm the temperature setting.
- Встановлення часу висихання:
- Press and hold the right button to enter time setting mode. The time value will flash.
- Use the left and right buttons to adjust the desired drying time between 0 and 24 hours.
- Press the right button again to confirm the time setting.
- Початок сушіння: Once temperature and time are set, the dryer will begin the drying process automatically. The LCD will display the current temperature and remaining time.
- Stop Drying: To stop the drying process before the timer expires, press and hold the left button until the display turns off.
Рекомендовані температури та час сушіння:
The following table provides general recommendations. Optimal settings may vary based on filament brand, age, and ambient humidity.
Figure 4: Recommended drying settings for common filament types.
| матеріал | Температура сушіння | Час висихання |
|---|---|---|
| PLA | 45-50°C | 3-6 годин |
| PLA Plus | 45-50°C | 3-6 годин |
| ДЕРЕВО | 45-50°C | 3-6 годин |
| PVB | 45-50°C | 3-6 годин |
| ABS | 50-55°C | 3-6 годин |
| ASA | 50-55°C | 3-6 годин |
| СТЕГНА | 50-55°C | 3-6 годин |
| PC | 50-55°C | 3-6 годин |
| PETG | 48-52°C | 3-6 годин |
| ТПУ | 48-52°C | 3-6 годин |
Технічне обслуговування
- Прибирання: Ensure the device is unplugged before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Зберігання: When not in use for extended periods, store the dryer in a cool, dry place away from direct sunlight.
- Зберігання нитки: For best results, store dried filament in airtight containers with desiccant packs to prevent re-absorption of moisture.
Усунення несправностей
- Problem: Dryer does not power on.
- рішення: Check if the power adapter is securely connected to both the dryer and the electrical outlet. Ensure the outlet is functioning correctly.
- Проблема: Філамент все ще вологий після висихання.
- рішення:
- Verify that the correct temperature and drying time were set for the specific filament type. Refer to the "Recommended Drying Temperatures and Times" table.
- Increase the drying time or temperature within the recommended range.
- Ensure the lid is properly closed to maintain the internal environment.
- Problem: Display is not working correctly.
- рішення: Try unplugging the dryer, waiting for 30 seconds, and then plugging it back in to reset the device.
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Модель | S1 Plus |
| Бренд | САНЛУ |
| Вага товару | 2.2 фунта (приблизно 1 кг) |
| Розміри упаковки | 11.54 x 10.98 x 4.29 дюймів |
| Сумісність діаметрів нитки розжарення | 1.75 мм, 2.85 мм, 3.00 мм |
| Діапазон налаштування температури | 35°C - 55°C |
| Діапазон налаштування часу | 0 - 24 годин |
| Робочий шум | <10 дБ |
| Максимальний робочий струм | 1.8А |
| Максимальна робоча потужність | 48 Вт |
Гарантія та підтримка
The SUNLU S1 Plus Filament Dryer comes with a one-year warranty period. For professional technical support, after-sales service, or any questions regarding your SUNLU Filament Dehydrator Box, please contact SUNLU customer service. They aim to reply to emails quickly during working hours.
Please refer to the official SUNLU webнайактуальнішу контактну інформацію та детальні гарантійні умови див. на сайті або в документації до покупки.
