FRIZZLIFE CP10R 2nd Stage Replacement Filter Cartridge User Manual

вступ

This manual provides essential instructions for the proper replacement and maintenance of your FRIZZLIFE CP10R 2nd Stage Replacement Filter Cartridge, designed specifically for the FRIZZLIFE TW10 Under Sink Water Filter System. Adhering to these guidelines will ensure optimal performance and longevity of your water filtration system.

Продукт закінченийview

The FRIZZLIFE CP10R is a high-grade carbon block filter, serving as the second stage in the TW10 under sink water filtration system. It is engineered to enhance water quality by reducing various impurities.

• High Grade Carbon Block Filter (5-micron): Effectively removes chlorine, chloramine, sediment, unpleasant taste, odor, cloudiness, and color. It also reduces Volatile Organic Compounds (VOCs) and other common chemicals from water.
• Сумісність: Спеціально розроблений як 2-йtage replacement filter for FRIZZLIFE TW10 under sink water filtration systems.
• Eco-friendly and Cost-effective: As the primary core filter cartridge requiring regular replacement, its design promotes environmental responsibility and economic efficiency.

This image displays the Frizzlife CP10R 2nd stage replacement filter cartridge alongside the complete Frizzlife TW10 under sink water filtration system, illustrating where the CP10R fits within the multi-stage налаштування.

Детальний view of the Frizzlife CP10R filter cartridge, highlighting its design and labeling.

Інструкція по заміні фільтра

The FRIZZLIFE TW10 system features an auto shut-off design, eliminating the need to turn off the main water supply before replacing the filter cartridge. Follow these steps for a quick and easy replacement:

1. Locate the CP10R (2nd stage) filter cartridge within your TW10 under sink system.
2. Grip the filter cartridge firmly.
3. Twist the cartridge counter-clockwise to unlock and remove it from the filter head. The auto shut-off feature will activate, preventing water leakage.
4. Insert the new CP10R replacement cartridge into the filter head.
5. Twist the new cartridge clockwise until it locks securely into place. You may feel a slight click or resistance when it is fully seated.
6. After replacement, slowly open the filtered water faucet and allow water to run for approximately 5-10 minutes to flush out any air and carbon fines.
7. Check for any leaks around the filter head. If leaks occur, ensure the filter is properly seated and twisted securely.

Примітка: If you encounter difficulty with inner core replacement, consider searching for a pre-assembled cartridge with the filter housing for easier installation.

Інструкції з експлуатації

Once installed, the CP10R filter operates continuously to provide filtered water. No specific operational steps are required beyond ensuring proper installation and regular replacement.

• Висока швидкість потоку: The system is designed to maintain a good flow rate for convenient access to filtered water.
• Якість води: Enjoy tap water that is clear, clean, and free from lead and unpleasant odors.

Технічне обслуговування

Regular replacement of the CP10R filter cartridge is crucial for maintaining optimal water quality and system performance.

• Період заміни: The CP10R filter cartridge typically lasts 8-12 months.
• Фактори, що впливають на життя: The actual service life of the filter depends on your local feed water quality and daily water usage. In areas with higher sediment or contaminant levels, more frequent replacement may be necessary.
• Ordering Replacements: To ensure continuous access to filtered water, it is recommended to have a replacement filter on hand. Replacement cartridges can be purchased from authorized FRIZZLIFE retailers or online.

Усунення несправностей

If you experience any issues with your water filtration system after replacing the CP10R filter, consider the following:

• Зменшений потік води: This may indicate a clogged filter. Ensure the filter is not past its recommended service life.
• Неприємний смак або запах: If the water develops an unusual taste or odor, the filter may be exhausted and require replacement.
• Витоки: Check that the filter cartridge is fully seated and twisted securely into the filter head. Ensure the O-rings are properly positioned and not damaged.

For persistent issues, please refer to the complete TW10 system manual or contact FRIZZLIFE customer support.

Технічні характеристики

Гарантія та підтримка

For information regarding product warranty or technical support, please contact FRIZZLIFE customer service. Details can typically be found on the product packaging or the official FRIZZLIFE webсайт.