Stelpro ASHC2002W

Інструкція з експлуатації надтихого настінного конвектора Stelpro (ASHC2002W)

Model: ASHC2002W

1. Вступ і даліview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W, in white, viewпід кутом.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. Інформація про безпеку

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

  • Прочитайте всі інструкції перед встановленням або використанням цього обігрівача.
  • Ensure the power supply is disconnected at the main circuit breaker before installation or maintenance.
  • Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
  • Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
  • Цей обігрівач призначений лише для використання всередині приміщень.
  • Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. Вміст упаковки

Переконайтеся, що всі компоненти є в наявності та не пошкоджені, відкривши упаковку:

  • Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
  • Concealed Mounting Bracket
  • Back Entry Plate with Cable Clamps
  • Монтажна фурнітура (шурупи, анкери)
  • Інструкція з експлуатації

4. Технічні характеристики

ОсобливістьДеталь
БрендСтелпро
Номер моделіASHC2002W
Вихідна потужність2000W (at 240V) / 1500W (at 208V)
томtage240 Volts (or 208 Volts)
Тип паливаЕлектричний
Опалювальне покриттяДо 200 квадратних футів
Розміри (В x Ш x Г)17 9/16" x 35" x 3 15/16" (approx. 17.56" x 35" x 3.94")
Вага товару18.9 фунта
КолірБілий
Тип монтажуWall Mount (Surface-mount)
ОсобливостіElectronic Thermostat, Energy Efficient, Fast Heating, Noiseless
Diagram showing the dimensions of the Stelpro convector heater: 17 9/16 inches high, 35 inches wide, and 3 15/16 inches deep.

Зображення 4.1: Розміри виробу

5. Монтаж

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Illustration showing a 240V hardwired electrical connection with a warning triangle icon.

Image 5.1: Hardwired Connection Requirement

5.1 Монтаж обігрівача

  1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
  2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
  3. Mark the drilling points on the wall using the concealed bracket as a template.
  4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
  5. Закріпіть монтажний кронштейн на стіні за допомогою наданих гвинтів.
  6. Ensure the bracket is level and securely fastened to support the heater's weight.
Image showing the concealed mounting bracket of the Stelpro convector heater, highlighting its 2000 Watts power, 5-year warranty, and totally quiet operation.

Image 5.2: Concealed Mounting Bracket

5.2 Електропроводка

  1. Ensure power is OFF at the main circuit breaker.
  2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
  3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
  4. Закріпіть усі з'єднання та переконайтеся, що жодні оголені дроти не оголені.
  5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
  6. Відновіть живлення на головному автоматичному вимикачі.

6. Інструкція з експлуатації

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Close-up of the Stelpro convector heater's built-in electronic thermostat with an LCD screen displaying '68°F'.

Image 6.1: Built-in Electronic Thermostat

6.1 Встановлення температури

  • Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
  • Обігрівач автоматично підтримуватиме встановлену температуру.

6.2 Режими роботи

  • Автоматичний режим: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
  • Режим безпеки: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. Технічне обслуговування

Регулярне технічне обслуговування забезпечує оптимальну роботу та довговічність вашого обігрівача.

  • Прибирання: Ensure the heater is turned off and cool before cleaning. Use a soft, damp тканиною для протирання зовнішньої поверхні. Не використовуйте абразивні засоби для чищення або розчинники.
  • Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
  • Щорічна перевірка: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. Вирішення проблем

If your heater is not operating correctly, consult the following common issues before contacting support:

  • Не включається обігрівач: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
  • Недостатнє тепло: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
  • Незвичайні шуми: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
  • Thermostat Display Issues: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. Гарантія та підтримка

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

  • 5-річна обмежена гарантія on the overall unit.
  • Довічна гарантія на нагрівальний елемент.
  • Гарантія 3 рік on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webсайт.

Пов'язані документи - ASHC2002W

попередньоview Інструкція з експлуатації та посібник з встановлення непрограмованого термостата STELPRO ST252NP, ST302NP, ST402NP
Вичерпний посібник з встановлення та експлуатації непрограмованих електронних термостатів STELPRO ST252NP, ST302NP та ST402NP для плінтусів та конвекторів. Містить технічні характеристики, функції та інформацію про гарантію.
попередньоview Stelpro Non-Programmable Electronic Thermostat (ST252NP, ST302NP, ST402NP) - Owner's Manual and Installation Guide
Comprehensive owner's manual and installation guide for Stelpro non-programmable electronic thermostats (models ST252NP, ST302NP, ST402NP). Covers important safety instructions, technical specifications, installation steps, interface overview, initial settings, key features, and warranty information.
попередньоview STELPRO ST252NPFF/ST402NPFF Non-Programmable Electronic Thermostat Owner's Manual and Installation Guide
This owner's manual provides comprehensive instructions for installing and operating the STELPRO ST252NPFF and ST402NPFF non-programmable electronic thermostats. It covers technical specifications, initial settings, features, and troubleshooting for baseboard, convector, and fan heaters.
попередньоview STELPRO ST302P/ST402P Programmable Electronic Thermostat Owner's Manual and Installation Guide
Comprehensive owner's manual and installation guide for the STELPRO ST302P and ST402P programmable electronic thermostats. Covers setup, programming, features, technical specifications, and warranty information.
попередньоview Інструкція з експлуатації та посібник з встановлення непрограмованого термостата STELPRO ST252NP, ST302NP, ST402NP
Вичерпний посібник користувача та посібник з встановлення непрограмованих електронних термостатів STELPRO (ST252NP, ST302NP, ST402NP) для плінтусів та конвекторів, що охоплює функції, налаштування та технічні характеристики.
попередньоview Посібник користувача програмованого електронного термостата STELPRO ST402PFF
Інструкція з експлуатації програмованого електронного термостата STELPRO ST402PFF. Охоплює встановлення, початкові налаштування, програмування, функції та технічні характеристики плінтусних, конвекторних та вентиляторних обігрівачів.