KFD MANGO120S-24CB-ING

KFD DC Adapter Instruction Manual

Model: MANGO120S-24CB-ING

1. Вступ

This instruction manual provides essential information for the safe and proper use of your KFD 12V-24V DC Adapter. This adapter is designed to power and charge compatible portable oxygen concentrators from a vehicle's DC power outlet. Please read this manual thoroughly before use and retain it for future reference.

2. Інформація про безпеку

Дотримуйтесь наступних запобіжних заходів, щоб запобігти травмуванню або пошкодженню пристрою:

  • Переконайтеся, що гучність адаптераtagНомінальні значення напруги та струму відповідають вимогам вашого пристрою. Цей адаптер забезпечує вихідну напругу 24 В постійного струму.
  • Не піддавайте адаптер впливу води, вологи або екстремальних температур.
  • Уникайте падіння або сильних ударів адаптера.
  • Не намагайтеся розбирати або модифікувати адаптер. Зверніться до кваліфікованого персоналу для обслуговування.
  • Unplug the adapter from the vehicle's power outlet when not in use or before cleaning.
  • Зберігати в недоступному для дітей місці.
Diagram illustrating multiple protection features of the KFD DC adapter, including overload, overcharge, short circuit, current, overheat, and power protection.

малюнок 2.1: The KFD DC Adapter incorporates multiple protection features for safe operation, including safeguards against overload, overcharge, short circuits, excessive current, overheating, and power fluctuations.

3. Продукт закінчивсяview

The KFD DC Adapter is a compact and efficient power supply designed for portable oxygen concentrators in vehicles. It features a standard car cigarette lighter plug for input and a barrel connector for output.

KFD DC Adapter with car charger plug and barrel connector, coiled neatly.

малюнок 3.1: The KFD DC Adapter, showing the main converter unit, the car charger plug, and the output barrel connector.

4. Налаштування та підключення

Follow these steps to connect your KFD DC Adapter:

  1. Перевірте сумісність: Ensure your oxygen concentrator requires a 24V DC input and has a compatible barrel connector. This adapter is specifically designed for Inogen Rove 6, Inogen One G5, and Oxygo Next models.
  2. Vehicle Power Outlet: Insert the car charger plug firmly into your vehicle's 12V-24V DC power outlet (cigarette lighter socket).
  3. Підключення до пристрою: Connect the barrel connector end of the adapter to the DC input port of your portable oxygen concentrator.
  4. Увімкнення: Once connected, your oxygen concentrator should begin to receive power or charge its battery, depending on its operational status.
Close-up of the car charger plug with non-slip shrapnel design, suitable for 12V-24V vehicle outlets.

малюнок 4.1: The car charger plug features a non-slip shrapnel design for a secure connection in vehicle power outlets.

5. Інструкція з експлуатації

Once connected, the KFD DC Adapter will provide continuous power to your compatible oxygen concentrator. It is designed for use in various vehicles, including cars, trucks, and boats, supporting 12V to 24V DC input.

KFD DC adapter plugged into a car's center console power outlet, powering a device.

малюнок 5.1: The adapter in use, providing power from a vehicle's DC outlet.

5.1. Сумісність

This KFD DC Adapter is compatible with the following oxygen concentrator models:

  • Inogen Rove 6 Oxygen Concentrator IO-501
  • Inogen One G5 Oxygen Concentrator (Models: BA-501, IO-500, I0-500, 10-500, BA-503, BA503, BA-500, BA-516, BA501, BA500, BA516)
  • Oxygo Next Portable Oxygen Concentrator (POC) Model: 1400-3000, SKU Part #: 1400-1050

Важлива примітка: Цей адаптер є НІ compatible with Inogen One G2, G3, G4 Oxygen Concentrators (which require 19V versions) or Inogen One G2, G3, G4, G5 External Battery Chargers.

Image showing the KFD DC adapter alongside compatible Inogen One G5 and Oxygo Next oxygen concentrators, and an incompatible Inogen battery charger.

малюнок 5.2: Visual representation of compatible oxygen concentrators and an example of an incompatible external battery charger.

6. Технічне обслуговування

To ensure optimal performance and longevity of your KFD DC Adapter:

  • Прибирання: Use a dry, soft cloth to clean the adapter. Do not use liquid cleaners or solvents.
  • Зберігання: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly.
  • Заміна запобіжника: The car charger plug contains a replaceable fuse for protection. If the adapter stops working, the fuse may need replacement.

6.1. Fuse Replacement Procedure

To replace the fuse in the car charger plug:

  1. Unplug the adapter from the vehicle's power outlet.
  2. Rotate the tip of the car charger plug counter-clockwise to unscrew it.
  3. Carefully remove the old fuse and replace it with a new fuse of the same rating (e.g., 5A).
  4. Screw the tip back on clockwise until secure.
Diagram showing how to unscrew the tip of the car charger plug to access and replace the fuse.

малюнок 6.1: Instructions for replacing the fuse within the car charger plug.

7. Вирішення проблем

If you encounter issues with your KFD DC Adapter, refer to the following common problems and solutions:

проблемаМожлива причинаРішення
Адаптер не забезпечує живленняПослаблене з'єднання
Перегорів запобіжник
Vehicle power outlet issue
Несумісний пристрій
Переконайтеся, що всі з’єднання надійні.
Перевірте та замініть запобіжник (див. розділ 6.1).
Test the vehicle power outlet with another device.
Перевірте сумісність пристрою (див. розділ 5.1).
Device not charging/powering efficientlyHigh power demand from device
Низький обсяг автомобіляtage
Ensure the concentrator is not operating at maximum settings if battery charging is slow.
Check vehicle battery health.
Adapter feels warm during useНормальна робота
Перевантаження
A slight warmth is normal. If it's excessively hot, disconnect immediately and check for compatibility or device malfunction.

8. Технічні характеристики

Key technical specifications for the KFD DC Adapter:

  • введення: DC 12V-24V (9-32V DC Max)
  • Вихід: 24V DC, 5A, 120W Max
  • Тип роз'єму: Роз'єм для стовбура
  • Загальна довжина кабелю: 2.6 метрів (приблизно 8.5 футів)
  • Особливості захисту: Над випtagЗахист від електромережі (OVP), захист від перевантаження по струму (OCP), захист від короткого замикання (SCP)
  • Сертифікати: CE, FCC, RoHS
  • Dimensions (Converter Unit): Приблизно 90 мм x 36 мм x 26 мм (3.54 дюйма x 1.42 дюйма x 1.02 дюйма)
  • вага: Приблизно 10.2 унції
Close-up of the KFD DC adapter label showing model number C120-240005000, input DC 12V-24V, output DC 24V 5A 120W Max, and CE FCC marks.

малюнок 8.1: Product label displaying electrical specifications and certifications.

Diagram showing the dimensions of the KFD DC adapter's car charger plug and the main converter unit in millimeters and inches.

малюнок 8.2: Physical dimensions of the KFD DC Adapter components.

9. Гарантія та підтримка

KFD products are certified and come with a warranty to ensure customer satisfaction.

  • Гарантія: 30 Days Free Exchange / 36 Months Warranty.
  • Підтримка клієнтів: For any questions, technical assistance, or warranty claims, please contact KFD customer service through the retailer where the product was purchased.

Пов'язані документи - MANGO120S-24CB-ING

попередньоview INGCO Inverter MMA Welding Machine Product Manual
This product manual provides comprehensive information for INGCO Inverter MMA Welding Machines, including safety guidelines, technical specifications, operating instructions, troubleshooting, and warranty details for models ING-MMA20038, ING-UMMA20038, and ING-MMA35038.
попередньоview Інструкція із застосування зарядного пристрою INGCO ING-CD2201/ING-UCD2201
Вичерпний посібник із експлуатації зарядних пристроїв INGCO ING-CD2201 та ING-UCD2201, що містить інструкції з безпеки, технічні характеристики, інформацію про експлуатацію, технічне обслуговування та гарантію.
попередньоview Інструкція з експлуатації безрейкового монтажного кронштейна Voltacon Ultimate
This instruction manual provides detailed guidance for installing the Voltacon Ultimate Rail-less Mounting Bracket. It includes a list of product components with part numbers (ING-SEC-35, ING-SMC-35, ING-SPR-01), step-by-step installation diagrams, required tools, and important safety notices for solar panel mounting systems.
попередньоview Metodika pro odpuzení vydry: Technické podmínky a aplikace PACHO-LEK®
Podrobná metodika a technické podmínky pro použití pachového ohradníku PACHO-LEK® a nosiče BIO10-S k efektivnímu odpuzení vydry z rybníků a vodních ploch bez poškození zvířete. Zahrnuje postup aplikace, materiálové vybavení a bezpečnostní pokyny.
попередньоview Curso Google Cloud Engineer Associate 2025 | Сертифікація онлайн
Підготуйтеся до сертифікації Google Cloud Engineer Associate протягом 24 годин онлайн. Aprende con clases prácticas, instructores certificados y acceso ilimitado a la plataforma. ¡Напишіть ой!
попередньоview GE Cync представляє посібник зі встановлення повнокольорового освітлення Puck
Детальний посібник зі встановлення GE Cync розкриває повнокольорові світлодіодні світильники Puck, охоплюючи налаштування, характеристики та різні способи монтажу. Дізнайтеся, як встановити розумні світлодіодні світильники Puck для вашого дому.