Інструкція з експлуатації робота-пилососа Tesvor S6

1. Вступ

The Tesvor S6 Robot Vacuum Cleaner is an advanced robotic cleaning device designed to efficiently clean your home. Featuring precision LiDAR navigation, powerful 2700Pa suction, and Wi-Fi connectivity, it offers a comprehensive cleaning solution for various floor types, from hard floors to medium-pile carpets. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Tesvor S6 to ensure optimal performance and longevity.

Figure 1: Tesvor S6 Robot Vacuum Cleaner

2. Налаштування

2.1 Розпакування та перевірка компонентів

Обережно вийміть усі компоненти з упаковки. Переконайтеся, що у вас є такі предмети:

• Tesvor S6 Robot Vacuum Cleaner
• Пульт дистанційного керування (2 батарейки типу AAA не входять до комплекту)
• Зарядна база
• Адаптер живлення
• Інструмент для очищення
• Extra set of High-Performance Filters
• 4 бічні щітки
• Посібник користувача (цей документ)

2.2 Розміщення зарядної бази

Place the charging base against a wall in an open, uncluttered area. Ensure there is at least 0.5 meters (1.6 feet) of clear space on either side and 1.5 meters (4.9 feet) in front of the charging base for the robot to navigate effectively.

2.3 Початкове заряджання

Connect the power adapter to the charging base and plug it into a wall outlet. Place the robot vacuum onto the charging base, ensuring the charging contacts align. The robot will begin charging automatically. For first use, fully charge the robot (approximately 4-5 hours).

2.4 Підключення програми

To unlock the full potential of your Tesvor S6, connect it to the Tesvor App. This allows for scheduling, zone cleaning, no-go zones, and real-time mapping.

1. Download the Tesvor App from your smartphone's app store.
2. Ensure your robot is powered on.
3. Open the Tesvor App and follow the on-screen instructions to add your device. Make sure your Wi-Fi network is 2.4GHz.

Figure 2: Tesvor App Control Interface, showing options for schedules, real-time map, no-go zones, custom cleaning zones, and spot cleaning.

3. Інструкція з експлуатації

3.1 Запуск циклу очищення

Press the power button on the robot or use the Tesvor App/remote control to start a cleaning cycle. The robot will automatically map your home using LiDAR navigation and clean in an efficient Z-shape route.

Figure 3: Illustration of the Tesvor S6's efficient Z-shape cleaning route compared to less efficient patterns.

3.2 Режими та функції очищення

• Автоматичне очищення: The robot intelligently cleans your home based on its mapped environment.
• Spot Clean: Direct the robot to clean a specific area with concentrated suction.
• Очищення зони: Визначте конкретні області на карті програми, які робот має прибирати.
• Заборонені зони: Set virtual boundaries on the app map to prevent the robot from entering certain areas.
• Carpet Boost: The robot automatically increases suction power when it detects carpets for deeper cleaning.

Figure 4: The Tesvor S6 automatically optimizes suction power when transitioning from hard floor to carpet for deep cleaning.

3.3 Self-Charging

When the battery is low, the Tesvor S6 will automatically return to its charging base. Ensure the charging base is accessible and clear of obstacles.

4. Технічне обслуговування

Regular maintenance is crucial for the optimal performance and longevity of your Tesvor S6. Perform these cleaning tasks regularly as recommended.

4.1 Cleaning the Dust Box and Filters

Empty the dust box after each cleaning cycle and clean the filters weekly.

1. Вимкніть робота.
2. Hold the orange button on the dust box and pull it out.
3. Open the dust box and pour out the collected debris.
4. Remove the pre-filter and gently clap it to remove dust.
5. Open the other side of the dust box, take out the HEPA filters and sponge, and clean them.
6. Reinstall all parts into the dust box and insert it back into the robot.

4.2 Cleaning and Installing the Water Tank (Mopping System)

If you use the mopping function (water tank sold separately), clean the water tank after each use.

1. Power off the robot and take out the water tank (which includes a small dust box).
2. Pour out any dust from the integrated dust box into a dust bin.
3. Take the mopping pad off the water tank, hand wash the pad, and air dry it.
4. Attach the dry mopping pad to the water tank, aligning it to the correct position.
5. Pour out any remaining water from the water tank to keep it clean.
6. Open the blue cap of the water tank, pour in a proper amount of water, and tightly lock the cap, ensuring it does not leak water.
7. Install the water tank as instructed, power on the robot, and use the mopping function via the app or remote control.

Note: Please do not use the mopping function on your carpet or rugs, otherwise, it will get stuck and wet your carpets.

4.3 Очищення роликової щітки

Clean the roller brush regularly to prevent hair entanglement and maintain cleaning efficiency.

1. Power off the robot and place it upside down on a flat surface.
2. Take off the yellow roller brush cover and remove the roller brush.
3. Use a knife or scissors to cut off any tangled hair, and clear out all stuck objects inside the brush.
4. After cleaning, install the roller brush, pressing hard until it fits correctly. Roll over the roller brush to ensure it moves smoothly.

4.4 Cleaning the Directional Wheel

Clean the directional wheel to ensure smooth navigation.

1. Power off the robot and place it upside down.
2. Use a knife or a similar tool to help roll over the directional wheel until you can see any stuck hair or debris. Cut it off for convenient cleaning.
3. Use tweezers to get the hair out.
4. If you cannot take out all the debris, use a tool (like a screwdriver) to slightly pull out one side of the wheel, then pull out the other side to remove the whole wheel.
5. Clean the wheel completely. After cleaning, install the wheel as instructed in the video. Press the wheel hard until you hear a sound that indicates it fits tightly. Roll over the wheel to ensure it is working fine.

4.5 Очищення бічних щіток

Regularly clean the side brushes to ensure effective edge cleaning.

1. Power off the robot and place it upside down.
2. Take off the side brushes and use the cleaning tool to clean the brushes, sweeping away dust and stuck pet hair.
3. Clean the other side brush as previously. Pay attention to the right and left when installing the side brushes.

4.6 Cleaning the Wheels

Inspect and clean the main wheels if they do not roll smoothly.

1. Power off the robot and place it upside down.
2. When the wheels do not roll smoothly, check if something is stuck in the wheel.
3. Press down one of the wheels, roll it over until you can see the objects stuck, then take them out.
4. Use tweezers to get the hard-to-reach objects.
5. Repeat the cleaning steps for the other wheel.

5. Вирішення проблем

If your Tesvor S6 encounters issues, refer to the following common problems and solutions. For more detailed troubleshooting, consult the full user guide PDF or contact customer support.

• Робот не вмикається: Ensure the power button is switched on and the battery is charged.
• Робот часто застрягає: Clear obstacles from the cleaning path. Use the app to set no-go zones around problematic areas.
• Погана продуктивність всмоктування: Empty the dust box, clean or replace filters, and check the roller brush for tangled hair.
• Проблеми з підключенням до програми: Ensure your Wi-Fi is 2.4GHz. Try resetting the robot's Wi-Fi connection and re-pairing with the app.
• Робот не повертається на зарядну базу: Ensure the charging base is properly plugged in and free of obstructions.

6. Технічні характеристики

7. Гарантія та підтримка

Your Tesvor S6 Robot Vacuum Cleaner comes with a worry-free 12-month warranty from the date of purchase. If you encounter any issues or have questions not covered in this manual, please contact Tesvor customer support for assistance.

For a complete and detailed user guide, please refer to the official PDF manual: Tesvor S6 User Manual (PDF)