Youmile DR-YM-569-2

Youmile 20V 5A USB-C PD2.0 PD3.0 to DC Fast Charge Trigger Module User Manual

Model: DR-YM-569-2

вступ

This manual provides detailed instructions for the Youmile 20V 5A USB-C PD2.0 PD3.0 to DC Fast Charge Trigger Module. This module is designed to convert USB-C Power Delivery (PD) input into a selectable DC output voltage, enabling versatile power solutions for various electronic devices. Please read this manual carefully before use to ensure proper operation and safety.

Youmile USB-C PD to DC Trigger Module, top and bottom view.

Image: The Youmile 20V 5A USB-C PD to DC Fast Charge Trigger Module, showing its compact design and USB-C input port.

Встановлення та налаштування

Модуль закінченоview:

Крупним планом view of the Youmile USB-C PD to DC Trigger Module circuit board.

Зображення: Крупний план view of the Youmile PD Trigger Module, highlighting its components and compact size.

Вміст упаковки:

томtage Вибір:

The module supports various output voltages. You can configure the desired voltage by either short-circuiting specific pads on the module or by adding an external resistor. The default output voltage is 20V if no modifications are made.

Method 1: Short Circuit Configuration

To select 12V, 15V, or 20V, you can short-circuit the corresponding pads on the module. For 5V, no short circuit is required.

Diagram showing short circuit configurations for 5V, 12V, 15V, and 20V output on the Youmile PD trigger module.

Image: Short circuit configurations for selecting 5V, 12V, 15V, and 20V output voltages. Ensure correct pads are shorted for the desired voltage.

Method 2: Resistor Configuration (for 9V, 18V, or custom voltagес)

For 9V or 18V, or other specific voltages, an external resistor needs to be soldered onto the designated pads. Refer to the table below for resistor values and corresponding voltagес.

Diagram showing where to place a resistor on the Youmile PD trigger module to change voltage, with a table of resistance values and corresponding voltagес.

Image: Diagram indicating the resistor placement for voltage adjustment. The accompanying table lists resistance values (in kΩ) required for 5V, 9V, 12V, 15V, 18V, and 20V outputs.

Resistor Values for Voltage Вибір
Опір (кОм) томtage
0 5V
6.04 9V
10 12 В
14 15 В
17.8 18 В
ЖОДНОГО 20 В

Електропроводка та підключення:

When connecting the module, always pay close attention to the positive and negative poles to prevent damage to the module or the connected device. Ensure the DC output cable is correctly wired to your device.

Image showing various DC connector types included with the Youmile PD trigger module.

Image: A selection of 8 common DC power connectors (6.4x4.4mm, 6.3x3.0mm, 5.5x2.5mm, 5.5x2.1mm, 5.5x1.7mm, 4.8x1.7mm, 4.0x1.7mm, 3.5x1.35mm) for various applications.

The included DC male power cable and 8 connectors allow for broad compatibility with different devices. Select the appropriate connector for your application.

Інструкція з експлуатації

Вимоги до джерела живлення:

Youmile PD trigger module connected to a USB-C power meter, displaying 20V and 4.73A output.

Image: The module connected to a USB-C power meter, demonstrating its ability to support 5A output with an electronically marked cable for high power applications.

томtage Negotiation:

The module initiates a Power Delivery negotiation with the connected USB-C power source. It will request the configured voltage. However, not all USB-C power supplies support every voltage. If the power supply does not support the requested voltage, the module will automatically trigger the next lowest available voltage that the power supply offers.

Exampле: If the module is configured for 15V, but the connected USB-C power supply only supports 5V, 9V, and 20V, the module will trigger a 9V output.

Images showing the Youmile PD trigger module connected to laptop USB-C ports, highlighting its application.

Зображення: Застосування examples showing the module connected to USB-C ports on laptops, illustrating its use for powering devices.

Технічне обслуговування

The Youmile PD Trigger Module requires minimal maintenance. Keep the module clean and free from dust and moisture. Avoid exposing it to extreme temperatures or direct sunlight. Do not attempt to disassemble the module, as this will void any potential warranty and may cause damage.

Усунення несправностей

Warning note about verifying voltage and polarity before connecting the Youmile PD trigger module to equipment.

Image: Important note reminding users to verify that the output voltage and polarity of the module match the requirements of the connected electrical equipment to prevent damage.

Технічні характеристики

Особливість Деталь
Бренд Youmile
Номер моделі DR-YM-569-2
вхідний інтерфейс USB-C (Type-C Female)
Вихідний інтерфейс DC (via included cable and connectors)
Робочий випtage 5V - 20V (Configurable)
Макс. Струм 5A (requires e-marked cable for >3A)
Максимальна потужність 100 Вт
PD Protocol Support PD2.0, PD3.0
Розміри упаковки 12.4 х 8.1 х 1.7 см
вага 50 грамів (повна вага упаковки)
Країна походження Китай

Інформація про гарантію

Specific warranty details for this product are not provided in the available information. Please refer to the retailer's return policy or contact the seller directly for warranty inquiries. Generally, electronic components come with a limited manufacturer's warranty against defects in materials and workmanship under normal use.

Підтримка клієнтів

For technical assistance, troubleshooting, or product-related questions, please contact your point of purchase or the manufacturer, Youmile, through their official support channels. When contacting support, please have your product model number (DR-YM-569-2) and purchase details readily available.

Пов'язані документи - DR-YM-569-2

попередньоview Youmile ZFC39 V2.0 ШІМ-контролер вентиляторів з функціями температури та сигналізації
Цей документ містить вичерпний оглядview та технічні характеристики контролера вентиляторів Youmile ZFC39 V2.0 PWM. У ньому детально описано функції плати, роз'єми, конфігурації DIP-перемикачів для діапазону ШІМ та керування температурою, налаштування зумера та робочі умови.ampфайли для систем охолодження ПК.
попередньоview Повзункові перемикачі: SS12F44 та SK12D07VG3 Технічні характеристики та застосування
Детальні характеристики, розміри та застосування повзункових перемикачів Youmile SS12F44 та SK12D07VG3 з конфігурацією 1P2T, номінальним струмом постійного струму 50 В/0.5 А та придатністю для електронних проектів, моделей автомобілів та аудіообладнання.
попередньоview Acer USB C Hub 10Gbps Troubleshooting Guide
Troubleshoot common issues with your Acer USB C Hub, including connection problems, slow data transfer, and charging failures. Learn how to optimize performance with expert tips.
попередньоview Керівництво користувача зарядного пристрою Prolink GT-23507 35 Вт GaN PD з 2 портами USB
Офіційний посібник користувача для зарядного пристрою Prolink GT-23507 35W GaN PD з 2 портами USB. Дізнайтеся про технічні характеристики, використання, запобіжні заходи та підтримку клієнтів.
попередньоview Crestron PSU-MIDSPAN-USB-1-C KIT: Single Channel USB Power Injector & Cables Manual
Explore the Crestron PSU-MIDSPAN-USB-1-C KIT, a comprehensive solution featuring a single-channel USB power injector and high-performance USB-C cables. This manual details its capabilities for 10 Gbps data transfer, 100W power delivery, and DisplayPort Alt Mode video, along with installation and configuration guidance for professional AV and networking environments.
попередньоview USB-концентратор Club 3D CSV-1596 6-в-1: 8K HDMI, 100 Вт PD, Ethernet, порти передачі даних
Детальний посібник з використання USB-хабу Club 3D CSV-1596 6-в-1 з інтерфейсом Type-C, що охоплює його функції, характеристики портів, вихід HDMI 8K, живлення потужністю 100 Вт, гігабітний Ethernet та USB-з’єднання для ноутбуків і мобільних пристроїв.