SCULPFUN S9 Laser Engraver 90W User Manual

1. Вступ

The SCULPFUN S9 Laser Engraver 90W is a high-performance laser engraving and cutting machine designed for precision work on various materials. Featuring advanced laser beam shaping technology, it offers exceptional cutting capabilities and engraving accuracy. This manual provides essential information for safe operation, assembly, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Інформація про безпеку

УВАГА: This is a Class IV laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles during operation. Ensure the laser protective cover is in place to filter harmful UV rays.

• Ніколи не дивіться прямо в лазерний промінь.
• Operate the engraver in a well-ventilated area to dissipate fumes.
• Тримайте легкозаймисті матеріали подалі від робочої зони.
• Ensure the A4 size protective plate is used to protect the desktop from laser damage and isolate fire hazards.
• Familiarize yourself with the emergency power switch for quick shutdown.
• Зверніться до Інформація з безпеки у форматі PDF для детальних інструкцій з безпеки.

Figure 2.1: SCULPFUN S9 featuring a laser protective cover designed to filter 98% of ultraviolet rays, enhancing eye safety during operation.

3. Продукт закінчивсяview

The SCULPFUN S9 boasts a full-metal structure for enhanced durability and engraving accuracy. Its compact design allows for easy setup and operation. Key features include:

• 90W Effect Laser: Equipped with 5.5W laser shaping technology for ultra-fine 0.06mm laser focus.
• Cutting Capability: Can cut 15mm thick wood and 10mm acrylic.
• Матеріали для гравіювання: Capable of carving ceramics and stainless steel, in addition to wood, paper, cardboard, plastic, PCB board, aluminum oxide, and dark stone.
• Fixed Focus & Sliding Design: Simplifies focusing for easier engraving.
• Велика площа гравіювання: 410 x 420 mm working area, expandable with additional accessories.
• Precision Graduation Lines: X and Y axes include measurement lines for easy object sizing.

Малюнок 3.1: Закінченоview of the SCULPFUN S9 Laser Engraver and examples of its capabilities on different materials.

4. Налаштування

The SCULPFUN S9 is designed for fast assembly. Follow these steps to set up your engraver:

1. Розпакуйте всі компоненти та перевірте їх за пакувальним листом.
2. Assemble the X-axis assembly, X shaft, and Y shaft components as per the included instructions.
3. Attach the control box module set and support feet.
4. Install the laser module set and connect the 12V 5A power adapter and USB cable.
5. Ensure all screws are tightened securely using the provided M5, M4, and M3 screwdrivers.
6. Attach the belts and ensure proper tension.

Figure 4.1: Visual guide for the fast assembly design of the SCULPFUN S9 Laser Engraver.

5. Інструкція з експлуатації

The SCULPFUN S9 is compatible with various precision engraving software. Ensure your software is properly configured before operation.

• Сумісність програмного забезпечення: Supports LaserGRBL, LightBurn, Benbox, GrblController, LiteFire.
• Операційні системи: Compatible with Windows (XP/7/8/10/11) and MAC (LightBurn).
• File Формати: Supports JPG, PNG, DXF, SVG, G-Code, NC, BMP, etc.
• Фокусування: Use the fixed focus lens and sliding design for quick and accurate focusing. The laser beam is only 0.1mm, allowing for ultra-fine engraving lines.
• Підготовка матеріалу: For engraving reflective materials like stainless steel, apply a black coating (e.g., whiteboard pen ink or marker ink) to improve engraving efficiency. Allow the coating to dry completely before engraving.

Figure 5.1: Demonstrates the fixed focus and easy sliding design, along with the circular eye protection cover for safe observation.

6. Технічне обслуговування

Regular maintenance ensures the optimal performance and longevity of your SCULPFUN S9 laser engraver.

• Очищення лазерних лінз: The exhaust hood helps reduce fume particles from attaching to the front lens. If laser energy weakens, clean the lens with a cotton swab and alcohol to refresh laser power.
• Генеральне прибирання: Keep the machine free from dust and debris. Regularly wipe down the X and Y axes.
• Натяг ременя: Periodically check the tension of the belts and adjust if necessary to maintain engraving accuracy.

Figure 6.1: The SCULPFUN S9 laser module features an efficient and quiet powerful fan for optimal performance and longevity.

7. Вирішення проблем

If you encounter issues with your SCULPFUN S9, refer to the following common problems and solutions:

• Engraving is not precise or lines are uneven:
  • Перевірте натяг ременя.
  • Переконайтеся, що матеріал рівний і надійно закріплений.
  • Verify laser focus is correctly set for the material thickness.
• Laser is not firing or is weak:
  • Check power connections and ensure the power switch is on.
  • Очистіть лазерну лінзу, як описано в розділі «Технічне обслуговування».
  • Verify software settings for laser power and speed.
• Machine is not responding to software commands:
  • Переконайтеся, що USB-кабель надійно підключено як до гравера, так і до комп’ютера.
  • Restart the software and the engraver.
  • Check device drivers and software compatibility with your operating system.

8. Технічні характеристики

9. Гарантія та підтримка

SCULPFUN offers a one-year warranty and 12-hour quick response support for the S9 Laser Engraver. For technical support or warranty claims, please contact the manufacturer directly.

Visit the official SCULPFUN store for more information and resources: SCULPFUN Store