1. Продукт закінчивсяview
The JOYO JF-16 British Sound Amp Simulator Pedal is a guitar effect pedal designed to emulate the tones of classic British amplifiers. It offers a range of tones from bluesy overdrive to powerful rock sounds, providing versatility for various musical styles. This pedal features true bypass to maintain signal integrity when disengaged.
Зображення 1.1: Верх view of the JOYO JF-16 British Sound Pedal.
2. Інформація про безпеку
- Ensure proper power supply (DC 9V, center negative) to avoid damage to the pedal.
- Always connect the guitar fully to the pedal before playing to prevent unexpected noise.
- Avoid using the pedal in extremely hot, cold, humid, or dusty environments.
- Do not disassemble or attempt to repair the pedal yourself. Refer to qualified service personnel.
3. Вміст упаковки
Комплект включає:
- JOYO JF-16 British Sound Amp Симулятор педалі
- DC 9V Power Supply (800mA - 1A) AC Adapter
Note: Items may be shipped separately.
4. Елементи керування та функції
Зображення 4.1: Кутовий view of the JOYO JF-16 British Sound Pedal showing controls and jacks.
- Ручка LOW: Регулює низькочастотну характеристику.
- Ручка MID: Регулює частотну характеристику середнього діапазону.
- Ручка HIGH: Регулює високочастотну характеристику.
- Ручка LEVEL: Контролює загальну гучність вихідного сигналу ефекту.
- Ручка VOICE: Shapes the tonal character, simulating different ampозвучування лайфії.
- Ручка DRIVE: Adjusts the amount of gain/distortion.
- НОЖНИЙ ПЕРЕМИКАЧ: Engages or bypasses the effect. Features true bypass.
- Роз'єм INPUT: 1/4-inch mono audio input for your guitar.
- ВИХІД Джек: 1/4-inch mono audio output to your ampпедаль газорозрядника або наступна педаль.
- Вхід DC 9V: Power input for a 9V DC center-negative adapter.
5. Налаштування
- Connect your guitar to the INPUT jack of the JF-16 pedal using a standard 1/4-inch instrument cable.
- Connect the OUTPUT jack of the JF-16 pedal to your ampвхідний сигнал лайфера або наступна педаль у вашому сигнальному ланцюжку.
- Connect the DC 9V power adapter to the pedal's power input. Ensure the adapter meets the specified requirements (9V DC, center negative, 800mA - 1A).
- Увімкніть свій ampліфірник.
Image 5.1: The JOYO JF-16 pedal integrated into a guitar setup.
6. Інструкція з експлуатації
- Engage/Bypass: Натисніть ножний перемикач, щоб увімкнути або вимкнути ефект. Світлодіодний індикатор світитиметься, коли ефект активний.
- Регулювання тону: Use the LOW, MID, and HIGH knobs to sculpt your desired EQ. Experiment with these controls to match your guitar and amplifier characteristics.
- Setting Gain: Turn the DRIVE knob clockwise for more distortion and sustain, or counter-clockwise for cleaner tones.
- Voicing the Amp: The VOICE knob allows you to fine-tune the amplifier's tonal character. This control is crucial for achieving specific British amp sounds, from classic blues-rock to aggressive hard rock.
- Регулювання гучності: Adjust the LEVEL knob to set the overall output volume of the pedal. Ensure the volume is balanced with your bypassed signal or other effects.
7. Power Supply Information
The JOYO JF-16 pedal requires a DC 9V power supply with a center-negative polarity. The recommended current draw is between 800mA and 1A. Using an incorrect power supply can damage the unit and void the warranty.
Image 7.1: Diagram illustrating the DC 9V power adapter specifications (5.5x2.1mm, tip negative).
Зображення 7.2: Внутрішній view of a power adapter with Smart IC Control for protection against over-current, over-temp, over-voltagе, і короткі замикання.
8. Noise Reduction Tips
- Ensure your electric guitar circuits are properly shielded and have a ground wire.
- Use high-quality instrument cables to minimize signal interference.
- Переконайтеся, що ваш amplifier has a proper ground connection.
- Be aware that some pickups, especially single-coil pickups in high-gain settings, can naturally produce more noise.
- Consider using a dedicated power supply designed for guitar pedals to reduce noise disturbance.
9. Технічні характеристики
| Особливість | Специфікація |
|---|---|
| Бренд | JOYO |
| Модель | JF-16 |
| Ефекти аудіовиходу | Спотворення |
| Тип елементів керування | ручка |
| Формат сигналу | Аналоговий |
| Джерело живлення | Adapter, Electric (DC 9V, 800mA-1A, center negative) |
| Апаратний інтерфейс | HP-HSC |
| Колір | Purple (based on product images) |
10. Технічне обслуговування
- Clean the pedal regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the pedal to moisture or extreme temperatures.
- Store the pedal in a dry, cool place when not in use.
- Periodically check all cable connections for wear and tear.
11. Вирішення проблем
- Немає звуку: Check all cable connections, power supply, and ensure the pedal is engaged. Test with different cables and a different power supply if possible.
- Надмірний шум/гул: Refer to the "Noise Reduction Tips" section. Ensure proper grounding and use high-quality cables. Test in a different electrical outlet.
- Weak/Distorted Sound (unexpectedly): Check your guitar's battery (if active pickups), cable integrity, and amplifier settings. Adjust the pedal's LEVEL and DRIVE knobs.
- LED Not Lighting Up: Verify the power supply connection and ensure it meets the correct specifications.
12. Гарантія та підтримка
For any product issues or support inquiries, please contact the seller directly through your order details on Amazon. This is the fastest and most effective way to receive assistance.
Image 12.1: The JOYO pedal is compatible with various brands of effect pedals and keyboards.
